Beltpack Manuals & User Guides

Clear-Com FSE-BP50-X4 FreeSpeak Cell 8 Key Beltpack Owner’s Manual

May 13, 2026

Clear-Com FSE-BP50-X4 FreeSpeak Cell 8 Key Beltpack Important Information Important! Before use, please verify that the system firmware is up to date. FS Cell™ is an 8-key belt pack that works with private LTE systems and connects to an Eclipse®-HX…

Brand: Clear-Com

Studio Technologies M374A,05001 Intercom Beltpack User Guide

March 4, 2026

Studio Technologies M374A,05001 Intercom Beltpack Introduction The Model 374A Intercom Beltpack begins with the features offered by traditional party-line intercom user devices and adds a range of new capabilities along with the advanced performance and flexibil-ity that Dante® audio-over-Ethernet provides.…

Brand: Studio Technologies

Clear-Com HX-BP-4K HelixNet 4 Keyset Beltpack User Guide

November 25, 2025

HelixNet 4 Keyset Beltpack (HX-BP-4K) Quick Start Guide HX-BP-4K HelixNet 4 Keyset Beltpack Important! Before use, please verify that the Arcadia system firmware is up to date. https://qr-codes.io/4TgMHMfDh7j The HelixNet 4 keyset beltpack is designed to be used with the…

Brand: Clear-Com

Clear-Com 93159 FSII Beltpack Instructions

September 29, 2025

Clear-Com 93159 FSII Beltpack Instructions Clear-Com - FSII Beltpack Bluetooth Upgrade Document Free Speak II 1.9 beltpacks with firmware version 5.3.32.0 upwards now support Bluetooth headsets. You can easily identify the Bluetooth-enabled beltpacks by checking whether the blue label is…

Brand: Clear-Com

behringer PM1 In Ear Monitor Beltpack User Guide

August 1, 2024

behringer PM1 In Ear Monitor Beltpack USER GIDE Safety Instruction 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth.…

Brand: Behringer

Studio Technologies 370A Intercom Beltpack User Guide

May 29, 2024

Studio Technologies 370A Intercom Beltpack Product Information Specifications Model: 370A Type: Intercom Beltpack Serial Numbers: M370A-04501 and later Firmware: 2.1 and later Material: Aluminum alloy enclosure with stainless steel belt clip Audio Quality: Low distortion, low noise, high headroom Applications:…

Brand: Studio Technologies

studio-tech 372A Intercom Beltpack Instructions

March 21, 2024

Model 372A Intercom Beltpack User Guide Issue 2, June 2023 This User Guide is applicable for serial numbers M372A-00151 and later with application firmware 2.1 and later Copyright © 2023 by Studio Technologies, Inc., all rights reserved studio-tech.com Revision History…

Brand: studio-tech

Studio 374A Intercom Beltpack User Guide

December 26, 2023

Studio 374A Intercom Beltpack Product Information Specifications Serial Numbers: M374A-04001 to 04500 Application Firmware: 2.1 and later Power Requirement: Power-over-Ethernet (PoE) Operating Parameters: Configurable using the STcontroller software application Audio Channels: 4 Enclosure: Aluminum alloy Belt Clip: Stainless steel Introduction…

Brand: Studio

FOS technologies BK-101 IPB Intercom Beltpack Instruction Manual

February 22, 2023

    IPB Intercom Beltpack Instruction Manual     INTRODUCTION Thank you for choosing this intercom product. BK-101 is a new design belt pack with plastic case. It can work with IMS Intercom Master station. This belt pack adopts wired…

Brand: FOS technologies

STUDIO TECHNOLOGIES 362A Listen-Only Beltpack User Guide

January 14, 2023

STUDIO TECHNOLOGIES 362A Listen-Only Beltpack Introduction The Model 362A Listen-Only Beltpack is a self-contained 2-channel user device that supports head-phone monitoring of two audio channels associated with the Dante® audio-over-Ethernet media networking technology. Each Model 362A is intended to be…

Brand: Studio Technologies