TABWEE T20 Tablet PC

CHARGER

HEADPHONE JACK


How to insert the TF card

How to boot
- Non-removable battery
- Press the power button for 3-5 seconds to boot
Language switching settings
- Main menu–settings-system setting–language and input method.
- Language and input method–language–language adding.
- Select the language you need, the system will automatically jump back to the language interface.
- Select the icon after the language bar and drag it to the first one.
SAR
For the countries that adopt the SAR limit of 2.0 W/kg over 10 grams of tissue. The device complies with RF specifications when used at a distance of 5mm from your body.
For the countries that adopt the SAR limit of 1 .6 W/kg over lg ram of tissue. The device complies with RF specifications when used near your ear or at a distance of 0mm from your body. SAR information on this can be viewed online at http://www.fcc.gov/oet/ea/fccid/.
Safety
Safety- In order to ensure safely using the product, you must strictly abide by the following rules
- The pad should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
- Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
- If the device is equipped with a non-removable battery, do not replace the battery yourself to avoid damaging the battery or device.
- Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards.
- Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
- Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
- The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
Maintenance
- Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
- Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other methods.
- Please avoid falling, knocking or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
- Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water or a mild soap.
- Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
- If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a pad that cannot remove the battery, please press and hold the power button for more than 12 seconds, the pad will be forced to restart (unlock the pad when restarting)
- It can solve the general bug; for the pad that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
- When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been
fully charged to the charger for a long time, as overcharging will shorten the battery life.
Check your certification number
- If you want to check your certification number, please follow these steps: Settings -About Tablets -Certification.
CE Caution:
- Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria(BG), the Czech Republic(CZ), Denmark(DK), Germany(DE), Estonia(EE), lrel and(IE), Greece(EL), Spain(ES), France(FR), Croatia(HR), ltaly(ID, Cyprus(CY), Latvia(LV), Lithuania(LD, Luxembourg(LU), Hungary(HU), Malta(MD, Netherlands(NL), Austria(AD, Poland(PL), Portugal(PD, Romania(RO), Slovenia(SI), Slovakia(SK), Finland(FI), Sweden (SE), the Turkey(TR), Norway(NO), Switzerland(CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.

Declaration: Our equipment which support 5G Wi-Fi all meet the above EU Standards. Otherwise, they do not meet the above standards.
The object of the declaration described above is in conformity with the essential requirements of the relevant Union harmonization legislation: Radio Equipment Directive RED (2014/53/EU).
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different f rom that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
ISED Statement
English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian Information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an un controlled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having again greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Documents / Resources
![]() | T20 Android 15 Tablet |
References
- User Manualmanual.tools

Il mouse non va e ho cambiato le batterie
The mouse is not working even after changing the batteries. How can I fix this?
If your mouse is not working with the TABWEE T20 Tablet after changing the batteries, please try the following troubleshooting steps:
If the issue persists, you can contact the manufacturer's technical support at serviceplus.linda@gmail.com or via WhatsApp using the QR code provided in the manual's warranty section.
Read the full Q&A page
핀번호. 핀 번호를 잃어버려서 기기 초기화 방법을 알고 싶습니다.
How do I factory reset the TABWEE T20 tablet if I have lost my PIN?
If you have lost your PIN, you will need to perform a factory reset to regain access to the device. Please note that this will erase all data on the tablet.
While the manual does not provide a specific step-by-step button combination for the Android Recovery menu, most tablets of this type use the following standard procedure:
Note: Due to Android Factory Reset Protection (FRP), you will likely be required to log in with the Google Account previously synced to the device after the reset. If you need further technical assistance, you can contact the manufacturer's support at serviceplus.linda@gmail.com or via WhatsApp using the QR code provided in the manual.
Read the full Q&A page
PCモードへの切り替え方法
How do I switch to PC mode?
The provided manual for the TABWEE T20 Tablet PC does not contain specific instructions for a "PC mode" or desktop interface. However, on most Android tablets with this feature, you can typically find it using one of the following methods:
If you cannot find this setting, please contact the manufacturer's support team at serviceplus.linda@gmail.com for further assistance.
Read the full Q&A page