SZ PGST PG-A04 Alarm Host User Manual

The alarm host and wireless keyboard contain various components
including indicator lights, buttons, and switches. Refer to the
user manual for detailed descriptions.

2. Install the Smart Life APP

2.1 Download Smart Life APP

Download the Smart Life APP from the respective app store based
on your location.

2.2 Connect Alarm Host to Smart Life APP

Ensure your Wi-Fi network is set to 2.4 GHz. Follow the steps in
the user manual to connect the alarm host to the Smart Life
APP.

3. Usage Steps

Connect the alarm host to power supply.
Install batteries into the wireless keyboard.

Turn on the POWER switch on the host and wireless
keyboard.
Ensure both host and keyboard are in disarmed state.

Enter setting commands on the wireless keyboard: [SET] [6666] [#].
Enter command: [00][#] to enter Wi-Fi pairing mode.

Follow voice prompts and indicator light signals for successful
setup.

Frequently Asked Questions (FAQ)

Q: Can I connect this product to multiple smart speakers
simultaneously?

A: Yes, this product can be connected to smart speakers like
Alexa and Google Home simultaneously for enhanced control and
monitoring.

Q: What should I do if I encounter connectivity issues during
setup?

A: If you face connectivity issues during setup, ensure your
Wi-Fi network is correctly configured to 2.4 GHz and your mobile
phone’s Wi-Fi and Bluetooth are turned on. Follow the
troubleshooting steps provided in the user manual for
assistance.

“`

View Fullscreen

Alarm Host
User Manual
Before installing and using the product, please read the User Manual carefully and keep it properly for future reference at any time.The pictures in this User Manual are for reference only. The actual product shall govern.

English
I.Overview
With wireless communication technology applied, this product has the advantages of easy installation, strong anti-interference and long communication distance. It offers multiple versions for selection, including Wi-Fi, and can be connected to Tuya APP for remote control. It can also be connected to smart speakers like Alexa and Google Home. It is widely used in various fields such as homes, stores, schools, banks, and factories.
1.1 Product Pictures

Wireless keyboard

Alarm Host

1.2 Appearance and Components of Alarm Host and Wireless Keyboard

Indicator Light for home arming Alarm Indicator Light Indicator Light for outdoor arming Signal indicator light
SOS button

Wall Panel
Type-C interfice Battery power switch Buzzer Switch Setting button
Screw hole
Buzzer

Wall Panel
Screw hole
Screw hole

Indicator Light for Away Arming Signal indicator light
Numeric keypad area
Home arming Button Outdoor arming button Speaker

Indicator Light for home arming Alarm Indicator Light Sos Button
Fire Alarm Button
Medical Button
Delete input Button SET button
Disarming Button
Confirmation button

Wall panel Battery Power Switch
Battery compartment Battery cover

Accessories list: (subject to actual packaging)

Wall Panel
Screw hole
Screw hole

Infrared sensor x1
01

Door magnetic sensor x1

Remote control x2

II. Install the Smart Life APP 2.1 Download APP – Smart Life

“Smart Life ”
1). For IOS and Android users in Mainland China, please scan “Smart Life” APP QR code to download it. 2). For IOS and Android users outside Mainland China, please scan the “Smart Life” APP QR code to download it. 3). After downloading the APP, please enable all usage permissions of the APP in the phone settings. 4). Register and log in to your APP account.

2.2 Connect the Alarm Host to the Smart Life APP

Notes: (1) The alarm host supports 2.4 GHz Wi-Fi network. Make sure your router is set up correctly and connected to the Internet. (2) When adding the alarm host to the Smart Life APP, please turn on the Wi-Fi and Bluetooth of your mobile phone and confirm that your mobile phone is connected to the 2.4 GHz band.

Usage steps

(1) When using it for the first time, please connect the alarm host to the power

supply and correctly install batteries into the wireless keyboard, and turn the

POWER switch on the side of the host and wireless keyboard to the “ON” position.

Then, the host and wireless keyboard will automatically start up. Confirm the host

and wireless keyboard are in the “disarmed” state, and enter the setting commands

on the wireless keyboard in sequence: [SET] [6666] [#]. Then, the Signal

indicator light on the keyboard is on, indicating the keyboard has entered the

setting mode. Enter the command: [00][#], and the voice prompt from the keyboard

indicates that it has entered the Wi-Fi paring mode, the host buzzer gives a “splash”

sound, and the Signal indicator light flashes continuously and quickly, indicating that

the host has entered the WiFi network configuration mode.

Operation method: [SET][6666][#][00][#].

(2) On the APP: Open the Smart Life APP and enter the Home interface.

1). Click + in the upper right corner of the interface and select Add a Device.

2). Press Add in the Discovered Devices area.

3). Enter your Wi-Fi password and click Next.

4). The device is added successfully.

5). You can remotely control the alarm system on the APP.

Click Accessories, click Sensors, press +, and then trigger the accessory to complete the pairing.

2.3 APP Settings
2.3.1 Add a device Click Accessories, click Remote Control, press +, and then trigger the remote control (push any button) to complete the pairing.

2.3.2 Renaming a device The accessory can only be renamed on the APP. Just press Accessory Name to edit the name.

2.3.3 Modifying attributes and device types of the sensor defense zone Click in turn: Accessories Sensors a sensor in the list Defense Zone Attributes Select the zone type to be modified Confirm Click Device Type Select the device type to be modified Confirm.

2.3.4 Shared devices An alarm host can only be paired with one APP account, but it can be shared among multiple family members for joint management.
2.3.5 Other settings Click Settings to modify the settings of the alarm host directly on the APP. The alarm system can be remotely controlled via the APP. You can also set the arming and disarming time, which is simple and convenient.

III. Setting up Safety Device 3.1 Pairing of Alarm Host with Wireless Keyboard
3.1.1 On the alarm host: (1) Turn the POWER switch on the side of the host to the “ON” position to make the host work normally. (2) After confirming the host is in the “disarmed” state, press the “SET” button on the side of the host, and the buzzer beeps and the Signal indicator light is on, indicating that the host has entered the wireless keyboard pairing mode. (3) If the alarm host is successfully paired with the wireless keyboard, and the buzzer sounds “beep”. If the alarm host fails to be paired with the wireless keyboard, the buzzer sounds “beep” twice. 3.1.2 On the wireless keyboard (1) Correctly install batteries into the wireless keyboard, turn the POWER switch on the side of the wireless keyboard to the “ON” position to make the wireless keyboard work normally. (2) Confirm the host is in the “disarmed” state, and enter the setting command on the wireless keyboard: [SET][6666][#] to enter the setting mode. (3) Enter the command [10] on the wireless keyboard and press the [#] key to confirm. (4) If the wireless keyboard is successfully paired with the alarm host, a voice prompt of “paring succeed” will be given; if the pairing between the wireless keyboard and the alarm host fails, a voice prompt of “paring failed” will be given.
Notes 1) The alarm host and wireless keyboard have been paired in the factory. Please use them directly. 2) For an alarm host, only one wireless keyboard can be configured. If the wireless keyboard has been unpaired with the alarm host, please pair them according to the above operations.
3.2 Alarm Host 3.2.1 Schematic diagram of wall-mounted installation

Alarm Host x 1

Wall-Mount Panel x 1 Screws x 2

1. Install the wall-mount plateon the wall using screws.Note: All screws must be fully securedto the wall.The wall-mount plate must be level.

2. Align the holes on the back ofthe host with the wall-mount plate,then install.

Notes 1) Install the alarm host in the center of the house to facilitate signal reception and transmission. 2) Install the alarm host close to the Wi-Fi router. 3) Avoid installing all devices on metal surfaces and load-bearing walls.
06

3.3 Wireless Keyboard 3.3.1 Schematic diagram of wireless keyboard installation

Wireless keyboard × 1

Wall panel × 1 Screw × 2

1. Install the wall panel on the wall with screws. Note: All the screws must be nailed into the wall and the panel must be parallel with the wall.

2. Align the holes on the back of the host with the panel, and then install the host.

Notes 1) Avoid installing the wireless keyboard outdoors in an unsheltered area or at a location prone to rain splashes. 2) The wireless keyboard shall be installed within the effective communication range with the alarm host to avoid signal attenuation caused by excessive distance or obstacles (metal walls, concrete).

3.3.2 Alarm mode (1) Alarm mode of the alarm host 1). Outdoor arming: The alarm host is in the monitoring state. When any accessory is triggered, the alarm host will sound an alarm. 2). Home arming: When the user is at home, certain areas can be monitored and alarmed in this mode. 3). Disarming: The alarm host and the wireless keyboard cancel the monitoring state, and only the SOS button or accessories set to be Effective for 24 hours will trigger the alarm. 4) SOS: When an emergency occurs, press and hold the SOS button for more than 1 second to trigger a distress alarm. 5) Fire alarm: When a fire occurs, press and hold the fire alarm button for more than 1 second to trigger a distress alarm. 6) Medical: When a medical rescue incident occurs, press and hold the SOS button for more than 1 second to trigger a distress alarm. (2) Accessory mode 1). Effective home arming: After the alarm host is set as home arming, the alarm host will sound an alarm when this type of sensor is triggered. This type of sensor is recommended for main doors, windows, balconies, and perimeter areas. 2). Effective outdoor arming: After the alarm host is set as outdoor arming, the alarm host will sound an alarm when this type of sensor is triggered. This type of sensor is recommended for interior areas such as halls and bedrooms.

3). Effective for 24 hours: An alarm will be given whenever the sensor is triggered. It is recommended to use this type of sensor for the emergency buttons, smoke sensors, gas sensors, carbon monoxide sensors, water leak sensors, etc. 4). Off: No alarm will be given whenever the sensor is triggered. 5). Doorbell: Whenever the sensor is triggered or the doorbell is pressed, the alarm host will sound a ding-dong sound. 6). 24-hour silence: Whenever the sensor is triggered, it will sound an alarm, but the speaker will be silent. 7). Effective home arming (no delay): After the alarm host is set as outdoor arming or home arming, an alarm will be given directly without delay when this type of sensor is triggered. This type of sensor is recommended for main doors, windows, balconies, and perimeter areas. 8). Effective outdoor arming (no delay): After the alarm host is armed in away mode, no alarm will be given when this type of sensor is triggered. This type of sensor is recommended for interior areas such as halls and bedrooms, which can sound an alarm directly without delay.
Notes You can choose which sensor to arm in Home and Outdoor modes, or both, or maintain continuous arming for 24 hours. For example, if you want to avoid triggering the alarm while at home, you can set specific sensors to Outdoor Arming mode. In this way, after you set the host to Home Arming mode, the alarm will not be triggered at home, but only be triggered in Outdoor Arming mode.
3.4 Door Magnetic Sensor 3.4.1 Add the door magnetic sensor to the alarm host and wireless keyboard: (1) Correctly install batteries into the wireless keyboard, turn the POWER switch on the side of the host and the wireless keyboard to the “ON” position to make the host and the wireless keyboard work normally. (2) Confirm the host and the keyboard are in the “disarmed” state, and enter the setting command on the wireless keyboard: [SET][6666][#] to enter the setting mode. (3) Enter the command [23] and the sensor number [001-240] on the wireless keyboard in turn, press the [#] button to confirm, and then trigger the door magnetic sensor. (4) The wireless keyboard prompts “paring succeed” by voice, indicating that the door magnetic sensor has been added successfully. Operation method:[SET][6666][#][23][XXX][#]. XXX: represents the sensor number 001-240. 3.4.2 Installation Door magnetic sensors should be installed on doors and windows (see the figures). (1) First, wipe the area on the door or window clean, and then apply the doublesided tape to the bottom.
08

(2) The door magnetic transmitter (large) and magnet (small) should be installed separately. The triangle marks on the transmitter and magnet should face each other with the distance between them less than 0.6 inches. (3) When you open the door or window after the installation is complete, the indicator light will light up for 2 seconds, indicating that the installation is complete.

3.4.3 Battery replacement

Triangle markings are aligned with each other

Lift the door magnet that hasbeen installed on the door orwindow

Battery replacement Battery specification CR 2450X1

Indicator light
Screw hole

Front View

Screw hole

Screw hole Switch
Screw hole
Rear View

3.4.4 Delete door magnetic sensors 3.4.4.1 Delete a single door magnetic sensor On the alarm host and wireless keyboard: (1) Correctly install batteries into the wireless keyboard, turn the POWER switch on the side of the host and the wireless keyboard to the “ON” position to make the host and the wireless keyboard work normally.

(2) Confirm the host and the keyboard are in the “disarmed” state, and enter the setting command on the wireless keyboard: [SET][6666][#] to enter the setting mode. (3) Enter the command [24] on the wireless keyboard, then enter the sensor number [001-240], and press the [#] button to confirm. (4) The voice prompt from the wireless keyboard “configurate succeed” indicates that a single door magnetic sensor has been deleted successfully. Operation method:[SET][6666][#][24][XXX][#]. XXX: represents the sensor number 001-240.
3.4.4.2 Delete all door magnetic sensors On the alarm host and wireless keyboard: 1) Correctly install batteries into the wireless keyboard, turn the POWER switch on the side of the host and the wireless keyboard to the “ON” position to make the host and the wireless keyboard work normally. (2) Confirm the host and the keyboard are in the “disarmed” state, and enter the setting command on the wireless keyboard: [SET][6666][#] to enter the setting mode. (3) Enter the command [25] on the wireless keyboard and press the [#] button to confirm. (4) The voice prompt from the wireless keyboard “configurate succeed” indicates that all door magnetic sensors have been deleted successfully. Operation method: [SET][6666][#][25][#].
3.5 Infrared Sensor 3.5.1 Add an infrared sensor On the alarm host and wireless keyboard: (1) Correctly install batteries into the wireless keyboard, turn the POWER switch on the side of the host and the wireless keyboard to the “ON” position to make the host and the wireless keyboard work normally. (2) Confirm the host and the keyboard are in the “disarmed” state, and enter the setting command on the wireless keyboard: [SET][6666][#] to enter the setting mode. (3) Enter the command [23] and the sensor number [001-240] on the wireless keyboard in turn, press the [#] button to confirm, and then trigger the infrared sensor (wave your hand directly in front of the sensor until the light is on). (4) The voice prompt from the wireless keyboard “paring succeed” indicates that the infrared sensor has been added successfully. Operation method: [SET][6666][#][23][XXX][#]. Notice: The sensor number should not be set repeatedly, otherwise the sensor cannot be added successfully. 3.5.2 Installation (1) The recommended installation height is 79 inches to 87 inches (2.0 m to 2.2 m) above the ground. (2) Install it in a corner or on a flat wall without obstacles or blind spots. (3) It should not face cold or hot air vents or cold and heat sources.
10

Work indicator light
infrared sensor

1. Detection window 2. Work indicator light 3. Install bracket

Two 1.5V No. 7 batteries
Settings key Toggle switch

Installation height The sensor must be installed between 79 to 87 inches (2 to 2.2 m) above the ground.

ground

Looking down

Side view

3.5.3 Delete the Infrared Sensor

Fix the base to the wall with screws and hang the infrared sensor on the pivot shaft

3.5.3.1 Delete a Single Infrared Sensor On the alarm host and wireless keyboard:

(1) Correctly install batteries into the wireless keyboard, turn the POWER switch on

the side of the host and the wireless keyboard to the “ON” position to make the host

and the wireless keyboard work normally.

(2) Confirm the host and the keyboard are in the “disarmed” state, and enter the

setting command on the wireless keyboard: [SET][6666][#] to enter the setting mode.

(3) Enter the command [24] on the wireless keyboard, and then enter the sensor

number [001-240], and press the [#] button to confirm. (4) The voice prompt from the wireless keyboard “configurate succeed” indicates

that the single infrared sensor has been deleted successfully.

Operation method:[SET][6666][#][24][XXX][#]. XXX: represents the sensor number [001-240] .

3.5.3.2 Delete All Infrared Sensors On the alarm host and wireless keyboard:

(1) Correctly install batteries into the wireless keyboard, turn the POWER switch

on the side of the host and the wireless keyboard to the “ON” position to make the

host and the wireless keyboard work normally.

(2) Confirm the host and the keyboard are in the “disarmed” state, and enter the

setting command on the wireless keyboard: [SET][6666][#] to enter the setting mode. (3) Enter the command [25] on the wireless keyboard and press the [#] button to confirm. (4) The voice prompt from the wireless keyboard “configurate succeed” indicates that

all infrared sensors have been deleted successfully.

Operation method: [SET][6666][#][25][#].

3.6 Remote Control 3.6.1 Add a Remote Control On the alarm host and wireless keyboard: (1) Correctly install batteries into the wireless keyboard, turn the POWER switch on the side of the host and the wireless keyboard to the “ON” position to make the host and the wireless keyboard work normally. (2) Confirm the host and the keyboard are in the “disarmed” state, and enter the setting command on the wireless keyboard: [SET][6666][#] to enter the setting mode. (3) Enter the command [21] on the wireless keyboard, and then enter the remote control number [01-10], and press the [#] button to confirm. Then, trigger the remote control (any button). (4) The voice prompt from the wireless keyboard “paring succeed”, indicates that the remote control is added successfully. Operation method: [SET][6666][#][21][XX][#]. XX: represents the remote control serial number from 01 to 10. Notice: The remote control number should not be set repeatedly, and otherwise, the remote control cannot be added successfully. 3.6.2 Appearance Introduction

Go out and set up defenses
Set up defenses at home

Disarm button Urgent Help

Replace battery Battery specifications 3V CR2025
After the user completes the battery replacement, they can reinstall the remote control casing for use.

3.6.3 Delete the Remote Control 3.6.3.1 Delete a Single Remote Control On the alarm host and wireless keyboard: (1) Correctly install batteries into the wireless keyboard, turn the POWER switch on the side of the host and the wireless keyboard to the “ON” position to make the host and the wireless keyboard work normally. (2) Confirm the host and the keyboard are in the “disarmed” state, and enter the setting command on the wireless keyboard: [SET][6666][#] to enter the setting mode. (3) Enter the command [22] on the wireless keyboard, and then enter the remote control number [01-10], and press the [#] button to confirm. (4) The voice prompt from the wireless keyboard “configurate succeed” indicates that the single remote control has been deleted successfully. Operation method: [SET][6666][#][22][XX][#]. XX: represents the remote control number from 01 to 10.
12

3.6.3.2 Delete All Remote Controls On the alarm host and wireless keyboard: (1) Correctly install batteries into the wireless keyboard, turn the POWER switch on the side of the host and the wireless keyboard to the “ON” position to make the host and the wireless keyboard work normally. (2) Confirm the host and the keyboard are in the “disarmed” state, and enter the setting command on the wireless keyboard: [SET][6666][#] to enter the setting mode. (3) Enter the command [22] on the wireless keyboard and press the [#] button to confirm. (4) The voice prompt from the wireless keyboard “configurate succeed” indicates that all remote controls have been deleted successfully. Operation method: [SET][6666][#][22][#].
IV. Learning to Use the Alarm Host 4.1 Host Panel Interface

4.1.1 Status Description of Working Indicator
Working indicator light The signal indicator flashes slowly. The signal indicator flashes once every 5 seconds.

Status description No signal WiFi successfully connected

The arm (outdoor arming) indicator flashes once per second.
The arm (outdoor arming) indicator is normally on. The home (home arming) indicator is normally on. The alarm indicator flashes once per second. The alarm indicator is normally on. The arm (outdoor arming) and home (home arming) indicators are off.

Arming delay state
Outdoor arming Home arming Alarm delay state Alarm state
Disarming state

4.1.2 Button Instructions of Host

Button

Function description

SOS button

When an emergency occurs, press the SOS button to trigger the host alarm to reach the emergency contact and send an alarm message.

SET button Short press the SET button to pair with a wireless keyboard.

4.2 Wireless Keyboard Interface

Working indicator light

Working status

The signal indicator flashes once every 2 seconds. Indication of disarming state when the keyboard is awoke.

The signal indicator flashes once every 90 seconds. Synchronous host disarming state indication when the keyboard is in sleep mode.

The arm (outdoor arming) indicator is normally on for 20 seconds.
The arm (outdoor arming) indicator flashes once every 90 seconds.

State indication when the keyboard sets the host to outdoor arming mode.
State indication of the synchronous host’s outdoor arming mode when the keyboard is in sleep mode.

The home (home arming) indicator is normally on 20 seconds. State indication when the keyboard sets the host to home arming mode.

The home (home arming) indicator flashes once every 90 seconds.
The alarm indicator is normally on.

State indication of the synchronous host’s home arming mode when the keyboard is in sleep mode.
Keyboard alarm state indication when operating SOS, fire and medical buttons on the keyboard

The alarm indicator flashes once every 90 seconds. Synchronous host alarm state indication when the keyboard is in sleep mode.

4.2.2 Operating Instructions of Wireless Keyboard Home arming: Press the Home Arming button on the keyboard, and the alarm host will be in the Home Arming state. When the accessories set for Home Arming are triggered, the alarm host will sound an alarm. Outdoor arming: Press the Outdoor Arming button on the keyboard, and the alarm host will be in the Outdoor Arming state. When the accessories set for Outdoor Arming are triggered, the alarm host will sound an alarm. Disarming: Press the Disarming button on the keyboard and enter the user password. After the system is disarmed, the alarm host will be released from alert. Medical: Press and hold the Medical button for more than 1 second, and the alarm indicator (Alarm) will be normally on. The host will send out an on-site sound and light alarm signal, and at the same time, it will make an alarm call and send an alarm text message to the preset alarm number. Fire Alarm: Press and hold the Fire Alarm button for more than 1 second, and the alarm indicator (Alarm) will be normally on. The host will send out an on-site sound and light alarm signal, and at the same time, it will make an alarm call and send an alarm text message to the preset alarm number. SOS: Press and hold the SOS button for more than 1 second, and the alarm indicator (Alarm) will be normally on. The host will send out an on-site sound and light alarm signal, and at the same time, it will make an alarm call and send an alarm text message to the preset alarm number.

4.2.3 Function Settings of Wireless Keyboard When the wireless keyboard is disarming state, press the “SET” button, enter the four-digit engineering password [6666], and press the [#] button to confirm. The voice prompt from the keyboard is “Please enter the command”. At the same time, the keyboard signal indicator stays on, indicating that it has entered the setting state. In the setting state, multiple function setting operations can be performed repeatedly. If the keyboard button operation is stopped for more than 30 seconds, the keyboard will automatically exit the setting and return to the standby state. Note: The factory value of the engineering password is [6666]. The following settings are all performed in the setting state. Enter the setting address and setting content in sequence, and press the # button to complete the setting. After the setting is completed, if you need to quickly exit the setting state, enter [*] and [#] in turn. The signal indicator is off, and you can quickly exit the setting state and return to the standby state.

Function
Enter the WiFi configuration mode
Configure wireless keyboard
SMS text language selection Keyboard voice language selection Remote control code pairing Delete a single remote control Delete all remote controls Sensor learning Delete a single sensor Delete all sensors Alarm sound setting Delayed arming time setting Delayed alarm setting Dialup times setting Modify the user password Modify the engineering password Keyboard system reset

Setting address
00

Setting content
#

Remarks
Enter the command 00-#, and the voice prompt from the keyboard indicates that it has entered the WiFi configuration mode; 1. The WiFi configuration is successful, and the voice prompt from the keyboard indicates that “WiFi configuration success”. 2. The WiFi configuration fails, and the voice prompt from the keyboard indicates that “WiFi configuration failed”.

1. The keyboard pairing is successful, and the voice prompt from the

keyboard indicates that “Learning Successful”. 2. The keyboard pairing fails, and the voice prompt from the keyboard

indicates that “Learning Failed”.

01-11#

1. Chinese 2. English 3. Italian 4. Polish 5. Russian 6. Greek 7. French 8. German 9. Spanish 10. Portuguese 11. Hungarian

01-02# 01. Chinese 02. English

01-10#

See 3.6.1 Add a Remote Control; support the configuration of 10 remote controls.

01-10# See 3.6.3.1

See 3.6.3.2

001-240# See 3.4.1 and 3.5.1. Support the configuration of 240 wireless sensors.

001-240# See 3.4.4.1 and 3.5.3.1

See 3.4.4.2 and 3.5.3.2

01-15# Setting range [00-15], unit: minute, default value: 3 minutes

01-600# Setting range [000-600], unit: seconds, default value: 15 seconds

01-600# Setting range [000-600], unit: seconds, default value: 0 seconds

00-10# Setting range [00-10], unit: times, 00: no dialing, default value: 3 times

38 0000-9999# Setting range [0000-9999], factory default: 1234 (see 4.3)

39 0000-9999# Setting range [0000-9999], factory default: 6666 (see 4.4)

Unpair the wireless keyboard from the host

4.3 Modify the User Password
In the disarming state, enter the engineering command [SET][6666#][38], and then enter the user password to be modified, and press the [#] button to confirm; the voice prompt from the wireless keyboard “configurate succeed” indicates that the user password is successfully modified.Operation method:[SET] [6666#][38] [XXXX][#].XXXX represents the set user password.For example, change the user password to 5678.Operation method:[SET][6666#][38][5678][#].

4.4 Modify the Engineering Password
In the disarming state, enter the engineering command [SET][6666#][39], and then enter the engineering password to be modified, and press the [#] button to confirm; the voice prompt from the wireless keyboard “configurate succeed” indicates that the engineering password is successfully modified. Operation method: [SET][6666#][39][XXXX][#]. XXXX represents the set engineering password. For example, change the engineering password to 9999. Operation method: [SET] [6666#][39][9999][#].
V. Phone Features 5.1 Automatic Dialing
When an alarm occurs, the alarm host will automatically dial the preset emergency number (the dial switch must be turned on during setting). If the user does not answer or the dialing fails, the host will automatically transfer to the next number and dial all preset phone numbers three times each in a cycle (factory default).
5.2 Remote Call
When several emergency numbers preset by the alarm host actively call the host, the alarm host will automatically answer the call.
VI. User Daily Operations
Users can operate the host in either way. · On-site keyboard operation · On-site remote control operation · Mobile APP remote operation
6.1 Outdoor Arming
Remote control operation: Press the Outdoor Arming button on the remote control. Keyboard operation: Press the Outdoor Arming button on the keyboard panel. APP operation: Tap the icon in the main interface. After about 3 seconds, you will receive a notification pushed by the APP: Device mode: Outdoor Arming! Prompt message. The APP state icon is updated to Arming. Host prompt: The Arm indicator flashes, accompanied by a beep, beep, beep prompt sound. It indicates that the host is in the arming delay countdown state. The user needs to leave the site before the delay ends. After the arming delay countdown ends, the Arm indicator is normally on. If the “Working Mode SMS Prompt” switch is turned on, a “System Arming” SMS will be sent to the preset phone number.
In the Outdoor Arming state, all defense zones enter the alarm state. At this time, if an accessory triggers an alarm, the alarm host will sound an alarm, send an alarm text message and make a call to the preset alarm phone number, and push the alarm information to the mobile phone APP.
16

6.2 Home Arming

Remote control operation: Press the Home Arming button on the remote control.

Keyboard operation: Press the Home Arming button

on the keyboard panel.

APP operation: Tap the icon in the main interface. After about 3 seconds, you will

receive a notification pushed by the APP: Device mode: Home Arming! Prompt message. The APP state icon is updated to Home Arming.

Host prompt: The Home indicator is normally on. If the “Working Mode SMS Prompt” switch is turned on, a “Home Arming” SMS will be sent to the preset

phone number. In the Home Arming state, only zones configured for Home Arming will be

activated. At this time, if any defense zone triggers an alarm, the alarm host will sound an alarm, send an alarm text message and make a call to the preset alarm

phone number, and push the alarm information to the mobile phone APP.

6.3 Disarming
Remote control operation: Press the Disarming button on the remote control. Keyboard operation: Press the Disarming button on the keyboard panel. APP operation: Tap the icon in the main interface. After about 3 seconds, you will receive a notification pushed by the APP: Device mode: Disarming! Prompt message. The APP state icon is updated to Disarming. Host prompt: The Home indicator is normally on. If the “Working Mode SMS Prompt” switch is turned on, a “System Disarming” SMS will be sent to the preset phone number.
After the zones are disarmed, all alarm processes will be forcibly terminated and the alarm host will return to normal.

6.4 SOS
Remote control operation: Press the SOS button on the remote control. Keyboard operation: Press the SOS button on the keyboard for more than 1 second. Press the fire alarm button on the keyboard for more than 1 second. Press the medical button on the keyboard for more than 1 second. APP operation: Press the SOS icon in the main interface, and the state icon in the middle of the APP interface will be updated to a distress alarm. Host prompt: The host sends out a sound and light alarm locally, sends an alarm text message and makes a call to the preset alarm phone number.

VII. Technical Parameters 7.1 Technical Specification for Alarm Host

Input voltage Working current Alarm current Wireless RF

DC5V (powered by USB Type-c standard interface) <100mA <300mA Modulation mode: FSK; center frequency: 433.92MHz

WiFi system Backup battery Operating temperature Operating humidity Product dimensions

IEEE802.11b/g/n wireless standard(Supports 2.4G WiFi) 3.7V/1000mAH lithium battery -10oC~55oC <80% (no condensation) 155*155*37mm

7.2 Technical Specification for Wireless Keyboard

Operating voltage Standby current Alarm current Wireless RF Operating temperature Operating humidity Product dimensions

DC3V (2 x 1.5 V AA battery) <20uA <100mA Modulation mode: FSK; center frequency: 433.92MHz -10 oC ~55 oC <80% (no condensation) 90*126*27mm

Documents / Resources

SZ PGST PG-A04 Alarm Host [pdf] User Manual
2AIT9-PG-A04, 2AIT9PGA04, PG-A04 Alarm Host, PG-A04, PG-A04 Alarm, Alarm Host, Alarm

References

User Manual

SZ PGST PG-A04 Alarm Host User Manual

PG-A04 Alarm Host

Specifications

Product Usage Instructions

1. Installation and Setup

1.1 Product Pictures

1.2 Appearance and Components