systemair SPI-125 C Adjusting Air Flow Iris Damper
Description
Technical details can be found here
The SPI is an iris damper for measuring and adjusting the air flow. The SPI has the following specifications: low noise level, centrically-formed air flow and fixed test points for precise measurements. The damper also has an adjustment aperture which can be opened completely, which means there is no need for an access door for cleaning. Available in sizes ø 80-800mm.
The damper is manufactured from galvanized sheet steel and is fitted with a rubber seal tested for air-tightness. Permitted ambient temperature is 70 °C. This device can be used for exhaust air.
Mounting
The SPI adjustment damper must be installed in accordance with the distances required to minimize air-flow deviation. Reducing or enlarging the duct to the next duct size does not require any specified distances for minimising deviation. The SPI enables the taking of precise air-flow measurements at all points including points close to duct deviations such as T junctions and bends, and points in front of other supply-air devices.
Protective distance
before bends – 1 x D
after“ – 1 x D
before T-pipes – 3 x D
after “ – 1 x D
before supply-air devices – 3 x D
Technical parameters
- Air tightness class: C
- Weight: 1,2 kg
Diagram
Mid-frequency band, Hz
Dimensions
ød | C | øD | |
SPI 80 | 79 | 58 | 134 |
SPI 100 | 99 | 48 | 163 |
SPI 125 | 124 | 50 | 210 |
SPI 150 | 149 | 50 | 230 |
SPI 160 | 159 | 52 | 230 |
SPI 200 | 199 | 58 | 285 |
SPI 250 | 249 | 90 | 333 |
SPI 300 | 299 | 56 | 405 |
SPI 315 | 314 | 90 | 406 |
SPI 400 | 399 | 90 | 560 |
SPI 500 | 499 | 90 | 644 |
SPI 630 | 629 | 90 | 811 |
SPI 800 | 798 | 70 | 1015 |
Get In Touch
Call: 0845 6880112
Email: info@adremit.co.uk
Our Address
Puravent, Adremit Limited, Unit 5a, Commercial Yard, Settle, North Yorkshire, BD24 9RH
Documents / Resources
![]() |
systemair SPI-125 C Adjusting Air Flow Iris Damper [pdf] Instructions SPI-125 C, Adjusting Air Flow Iris Damper, Air Flow Iris Damper, Iris Damper, SPI-125 C, Damper |