SYNERGEE Leg Press Machine
PARTS LIST
HARDWARE SIZING CHART
Assembly Steps
- Step 1
Parts Needed: Main Frame, Triangle Frame, M10x70 Bolt, M10 Washer, M10 Nut - Step 2
Parts Needed: Plate Storage Frame, Front Feet, Rear Feet, Oval Washers, M10x100 Bolt, M10x90 Bolt, M10 Washer, M10 Nut - Step 3
Parts Needed: Main Slider, Angled Slider, Adjustment Pins - Step 4
Parts Needed: Plate Loader, Foot Rest, Leg Rest Bar, Angled Slider Extension, M10x45 Hex Bolt, M10 Washer, M10 Nut - Step 5
Parts Needed: Upper Pulleys, M10x45 Bolt, M10 Washer, M10 Nut - Step 6
Parts Needed: Mid Pulleys, 95 Upper Cable, Carabiner - Step 7
Parts Needed: Single Pulley, 72 Lower Cable, M10x40 Bolt, M10x20 Bolt, M10 Washer, M10 Nut - Step 8
Parts Needed: Handle Bars, Main Seat, Main Seat Frame, M10x130 Hex Bolt, M6x15 Bolt, M10 Washer, M10 Nut - Step 9
Parts Needed: Lower Cushion, Small Seat Frame, Pin, M10x130 Hex Bolt, M6x15 Hex Bolt, M10 Washer, M10 Nut
Frequently Asked Questions
Q: What should I do if any pieces are missing?
A: If any pieces are missing from your leg press machine assembly, please contact us immediately at HELLO@SYNERGEEFITNESS.COM or call 1.855.217.7136 for assistance.
Documents / Resources
 |
SYNERGEE Leg Press Machine [pdf] Installation Guide Leg Press Machine, Press Machine |
