SYNCWIRE SW-EV784 EV Cable Charging User Manual

Symbol Meaning

Symbol	Meaning
	“Non-recyclable” Mark: located on the product, instruction manual or package, indicating that electrical and electronic equipment and its accessories should be t related separately from ordinary household waste. When scrapped, it should be treated as industrial waste, otherwise it may cause accidents.
	Warning Sign: indicates danger. Pay attention to the personal injury that may be caused by operation procedure or incorrect operation. Actions after the “Warning” sign can only be performed w hen the conditions indicated by the condition are fully understood and satisfied.

The company is committed to the continuous improvement and update of the product, product hardware and software will continue to upgrade, the information provided is subject to change without prior notice.

Product Overview

These EV charging cable, by standard IEC/EN 62196 type 2 to type 2, are intended to be used in EV conductive charging systems and for circuits specified in IEC 61851-1. It is to be used in an ambient temperature of between -35°C and +50°C by simply plugging usage.

Technical data

• Charging power subject to power design of EVSE device and vehicle.

Electrical performance

USAGE

1. Insert the cable plugs into the vehicle inlet and charging station outlet.
   
2. Make sure both plugs are properly connected, then charging will start.
   
3. Do not disconnect the charging cable while the vehicle is charging.
   
4. After charging is completed, please unplug the charging cable from the vehicle, then from the charging station.
   
5. As shown in the diagrams, please wipe the EV cable with the cloth included, then roll it up and store it in the storage bag after charging is complete.
   

 WARNINGS

• Please do not use any extension cord or adapter. & damaged in any means). ‘I
• Please do not plug the charging cable into a defective, loose or worn power outlet.
• Please do not insert the plug if any electrical outlet is wet or dirty.
• Please do not dismantle the protective cap. It protects the charging connector from moisture and dirt. After every use put the protective dust caps back on.
• Please do not try to disassemble the shell or any part of the cable. It will cause damages to the item and thus cause serious results when charging.
• Accordingly to your charging device and vehicle, the power rate is backwards compliant, yet couldn’t handle higher power rate, which will cause temperature rise and charging shutdown.

HANDLING

Please handle the charging cable with care. Do not pull, twist, tangle, drag, drop or step on it.

CARE

Clean the charging cable only when it is disconnected by using a damp cloth. Please do not use water or chemicals when cleaning the cable.