Wired 2D Scanner Manual
Quick Setup Guide
USB wired 1D & 2D Plug & Play Bar code Scanner
Supports Windows XP, Win7/8/10,MAC etc.
Packing list:
Quick Start Setup Guide x1 pc
Barcode scanner x 1 pc
Quick Setup Guide
This is 1D&2D plug and play model if you use a US keyboard. If you use other type of keyboard, plug the USB cable on your device , setup keyboard language before you use it. After that the scanner can start to work.
Barcode Programming
Netum barcode scanners are factory programmed for common terminal and communications settings. If you need to change these settings, programming is accomplished by scanning the bar codes in this guide. An asterisk (*) next to an option indicates the default setting.
Communication Mode
USB -KBW
When you connect the scanner to the Host via a USB connection, you can enable the USB-KBW feature by scanning the barcode below. It works on a Plug and Play basis and no driver is required.
USB COM
If you connect the scanner to the Host via a USB connection, the USB COM Port Emulation feature allows the Host to receive data in the way as a serial port does.
Keyboard Language
In order to let the scanner upload the codes in the correct way, you have to set the keyboard language.
For example
If you use French Keyboard, scan below the barcode of “French keyboard” then the scanner will upload barcodes according to France keyboard layout. American Keyboard is set by default, if you use a US keyboard you can skip this step. 
Scanning Mode
· Key Holding
Press the button to trigger the reading, release the button to end the reading.
Reading success or reading time over a single reading time will end the reading
Continuous Mode
Under continuous mode scanner performs continuous work. Reading success or reading time over a single reading time will end the reading. More than the specified time will automatically trigger the next reading.
Auto Sense Mode
Under auto sense mode, scanner detects the brightness of the surroundings.
Trigger reading when the brightness changes. Reading success or reading time over a single reading time will end the reading. Regardless of the last success or failure to read, re-enter the detection of the surrounding environment brightness.
Terminator confiiguration
The scanner provides a shortcut for setting the terminating character suffix to CR or CRLF and enabling it by scanning the appropriate barcode below.
Beeper Volume
To select a decode beep volume, scan the appropriate bar code.
Mute
To enable or disable close all prompt, scan the appropriate bar code below.
Default Configuration
If you want to cancel all the confiiguration that you have done to the scanner.
Scan below barcodes to the restore factory.
Symbologies
Add-On Code
An EAN/UPC barcode can be augmented with a two-digit or five-digit add-on code to form a new one. In the examples below, the part surrounded by blue dotted line is an EAN-8 barcode while the part circled by red dotted line is add-on code.
Interleaved 2 of 5
Enable/Disable Interleaved 2 of 5
To enable or disable Interleaved 2 of 5, scan the appropriate bar code below.
Note: Interleaved 2 of 5 with the length of 14 digits by default, if you have other length please scan “Any length”
Codabar
Enable/Disable Codabar
To enable or disable Codabar, scan the appropriate bar code below.
MSI/MSI PLESSEY
Enable/Disable MSI
To enable or disable MSI, scan the appropriate bar code below.
ISSN
Enable/Disable ISSN
To enable or disable ISSN, scan the appropriate bar code below.
GS1 DataBar/RSS
Enable/Disable GS1 DataBar-14
To enable or disable GS1 DataBar-14, scan the appropriate bar code below.
Enable/Disable GS1 DataBar Limited
To enable or disable GS1 DataBar Limited, scan the appropriate bar code below.
Enable/Disable GS1 DataBar Expanded
To enable or disable GS1 DataBar Expanded, scan the appropriate bar code below.
ID Inverse barcode
Normal barcode – White background and black bars
Reverse barcode- Black background with white bars
2D Symbologies
PDF417
Enable/Disable PDF417
To enable or disable PDF417, scan the appropriate bar code below.
QR
Enable/Disable QR
To enable or disable QR, scan the appropriate bar code below.
Reverse QR Code
Data Matrix(DM)
Enable/Disable Data Matrix(DM)
To enable or disable Data Matrix(DM), scan the appropriate bar code below.
Maxi Code
Enable/Disable Maxi Code
To enable or disable Maxi Code, scan the appropriate bar code below.
Aztec Code
Enable/Disable Aztec Code
To enable or disable Maxi Code, scan the appropriate bar code below.
Note: If you want other programmings which is not available in this manual, please do not hesitate to contact us: netumscan@163.com Support For any inquiries concerning our products, please send an email to netumscan@163.com, and we will respond to you as soon as possible.
Contact Information
Tel. +86-20-3222-8813
Email:service@netum.net
Website: www.netum.net
Add: Room 301, 6th Floor and full 3rd Floor, Building 1, No. 51 Xiangshan
Avenue, Ningxi Street, Zengcheng District, Guangzhou City, Guangdong Province, C hina
Documents / Resources
 |
symcode B07KG6KT7H Wired 2D Scanner USB Wired 1D and 2D Plug and Play Bar Code Scanner [pdf] User Guide B07KG6KT7H Wired 2D Scanner USB Wired 1D and 2D Plug and Play Bar Code Scanner, B07KG6KT7H, Wired 2D Scanner USB Wired 1D and 2D Plug and Play Bar Code Scanner |
