SwitchBot 2PM Relay Switch User Manual

SwitchBot 2PM Relay Switch

This document contains important technical and safety information about the device, its safety use and installation.

CAUTION! Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any). SwitchBot is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure of following the user and safety instructions in this guide.

Preparation

You will need:

• A smartphone or tablet using Bluetooth 4.2 or later. The latest version of our app, downloadable via the Apple App Store or Google Play Store.
• A SwitchBot account, you can register via our app or sign in to your account directly if you already have one.

iOS and Android system requirements
https://support.switch-bot.com/hc/en-us/articles/12567397397271

Product Overview

Relay Switch 2PM is an innovative microprocessor-managed device, which allows remote control of electric appliances through a mobile phone or tablet. It can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet. Relay Switch 2PM also supports real-time precise power measurement.

1. Neutral terminals
2. Load circuit 1 output terminal
3. Live (100-240 V) terminals
4. Load circuit 2 output terminal
5. Switch (controlling 01) input terminal
6. Switch (controlling 02) input terminal
7. 24 VDC positive terminal
8. 24 VDC negative terminal

Installation Instructions

Relay Switch 2PM (the Device) can control 2 electrical circuits, including a bi-directional AC motor. Each circuit can be loaded up to 10 A (16 A total for both circuits) and its power consumption can be measured individually (AC only). It can be retrofitted into a standard in-wall console, behind power sockets and light switches or other places with limited space.

Caution 

• CAUTION! Dangerofelectrocution. Mounting/installation of the Device to the power grid has to be performed with caution, by a qualified electrician.
• CAUTION! Danger of electrocution. Every change in the connections has to be done after ensuring there is no voltage present at the Device terminals.
• CAUTION! Use the Device only with a power grid and appliances which comply with all applicable regulations. A short circuit in the power grid or any appliance connected to the Device may damage the Device.
• CAUTION! Do not connect the Device to appliances
  exceeding the given max load!
• CAUTION! Connect the Device only in the way shown in these instructions. Any other method could cause damage and/or injury.
• CAUTION! Do not install the device at a place that is possible to get wet.

RE-COMMENDATION Connect the Device using solid single- core cables with increased insulation heat resistance not less than PVCTI 050C.

Before starting installing/mounting the Device, wire check that the breakers are turned off and there is no voltage on their terminals. This can be done with a phase meter or multimeter. When you are sure that there is no voltage, you can proceed to connecting the cables. lf you want to use the Device as a relay switch to control 2 load circuits, connect the Device as shown on Fig. I for AC circuits and on Fig. 2 for DC circuits.

CAUTION! Use the same power supply for the two load circuits and the Device.

For AC circuits connect both L terminals to the Live cable and the N terminal to the Neutral cable. Connect the first load circuits to the 01 terminal and the Neutral cable. Connect the second load circuits to the 02 terminal and the Neutral cable. Connect the first switch to the S1 terminal and the Live cable. Connect the second switch to the S2 terminal and the Live cable. For DC circuits connect both L terminals to the Negative cable and the N terminal to the Positive cable. Connect the first load circuits to the 01 terminal and the Positive cable.

Connect the second load circuits to the 02 terminal and the Positive cable. Connect the first switch to the S1 terminal and the Negative cable. Connect the second switch to the S2 terminal and the Negative cable.

RE-COMMENDATION: For inductive appliances that cause voltage spikes during switching on/off, such as electrical motors, fans, vacuum cleaners and similar ones, RC snubber (0.1 pF/100Q/ / AC)should be connected parallel to the appliance.”Gleichstromkreise(DC) dargestellt wird.

If you want to use the Device in dual input mode, connect the device as shown on Fig.3 for a switch inputs. Connect both L terminals to the Live cable and the N terminal to the Neutral cable. Connect the common motor terminal/cable to the Neutral cable.

Connect motor direction terminals/cables to the 01 and 02 terminals. Connect the first button/switch to the SI terminal and the Live cable. Connect the second button/switch to the S2 terminal and the Live cable.

LED Indicator Light

Resetting Factory Settings

Press and hold the device button for 1 5 seconds to restore factory settings. Please note that this operation will clear all historical data and settings.

Firmware Upgrades

In order to improve user experience, we will regularly release firmware updates to introduce new functions and solve any software defects that may occur during usage. When a new firmware version is available, we will send an upgrade notification to your account via our app. When upgrading, please make sure your product has sufficient battery or stay powered on and make sure your smartphone is within range to prevent interference.

Setting Up Matter

Scan the QR code to check the Matter setup guide.

Android
https://support.switch-bot.com/hc/en-us/articIes/13223951356823-How-to-Use-Matter-with-SwitchBot-Hub-2-Android–

Specifications

Disclaimer

• We are not responsible for any damages caused by natural disasters such as earthquakes, lightning, wind and water damage, fires that are not caused by the product, third party actions, intentional or negligent misuse by the customer, or other abnormal usage conditions.

Warranty

We warrant to the original owner of the product that the product will be free from defects in materials and workmanship. Please note that this limited warranty does not cover:

• Products submitted beyond the original limited warranty period.
• Products on which repairs or modifying have been attempted.
• Products subjected to falls, extreme temperatures, water, or other operating conditions outside the product specifications.
• Damage due to natural disaster (including but not limited to lightning, flood, tornado, earthquake, or hurricane, etc.).
• Damage due to misuse, abuse, negligence or casualty (e.g. fire).
• Other damage that is not attributable to defects in the manufacture of product materials.
• Products purchased from unauthorized resellers.
• Consumable parts (including but not limited to batteries).
• Natural wear of the product.

Contact & Support
Feedback: If you have any concerns or problems when using our products, please send feedback via Our app through the profile > Support page.

Setup and Troubleshooting

support-switch-bot.com

Support Email:
Support-E-Mail  support.switch-bot.com

Frequently Asked Questions

Please visit our website or scan the QR code below for more information.

https://support.switch-bot.com/hc/en-us/categories/ 25268283508247