QTM Series Quick-Connects
with Release Button
Operation Instructions
To Couple:
Align stem with body.
Push stem into body until it clicks.
To Uncouple:
Simultaneously press the button, and push the front sleeve toward the rear sleeve. 
www.swagelok.com
These instructions are also available in French, Italian, German and Spanish.
Good practices for Operations of Swagelok Quick-Connects
- Use filters ahead of quick-connects.
- Use body and stem protectors or dust caps on uncoupled bodies and stems.
- Align bodies and stems when coupling or uncoupling.
- Couple and uncouple quick-connects at room temperature.
- Couple and uncouple quick-connects during system cleaning operations.
- Support hanging hoses or other equipment to prevent side load.
- Relubricate stem seal O-rings periodically.
Caution: - Do not rotate under pressure.
- Do not insert foreign objects into uncoupled bodies stems.
Ratings
| Series | Pressure | Temperature |
| QTM2B | 4500 psi (310 bar) | 0 to 120°F (–17 to 48°C) |
| QTM4B and QTM8B | 3200 psi (220 bar) |
Swagelok—TM Swagelok Company
© Swagelok Company
Printed in U.S.A., CP
09-01 R1
MS-CRD-QTMB
Documents / Resources
 |
Swagelok QTM Series Quick-Connects with Release Button [pdf] Instruction Manual QTM Series Quick-Connects with Release Button, QTM Series, Quick-Connects with Release Button, Release Button, Button |
