Printa Ndogo ya TECH F21
Vipimo
- Teknolojia ya Uchapishaji: Thermal printing (inkless)
- Aina ya Uchapishaji: Nyeusi na nyeupe
- Aina ya Karatasi: Rolls karatasi ya joto
- Upana wa Karatasi: 57 mm
- Azimio la Kuchapisha: 203 DPI
- Kasi ya Uchapishaji: Approx. 10–15 mm/s
- Muunganisho: Bluetooth
- Vifaa Vinavyolingana: Android, iOS
- Programu Zinazotumika: Dedicated mobile printing app (varies by region)
- Aina ya Betri: Betri ya lithiamu inayoweza kuchajiwa tena
- Uwezo wa Betri: ~1000 mAh
- Mbinu ya Kuchaji: USB (Type-C or Micro-USB, model dependent)
- Uendeshaji Voltage: 5V
- Nyenzo: Plastiki ya ABS
- Ukubwa: Compact / portable
- Uzito: Lightweight (approx. 150–200 g)
- Supported Printing: Text, images, labels, QR codes, barcodes
Kutatua matatizo
Printa haiwashi
- Hakikisha kuwa betri imechajiwa.
- Jaribu kebo tofauti ya USB au chanzo cha nishati.
- Press and hold the power button for 3–5 seconds.
Bluetooth haiunganishi
- Turn Bluetooth OFF and ON again on your phone.
- Ensure the printer is not connected to another device.
- Reinstall or update the printer app.
- Keep the printer within 1–2 meters during pairing.
Blank or unclear printing
- Check that thermal paper is loaded correctly (print side facing out).
- Use compatible thermal paper only.
- Clean the print head gently.
- Ensure battery level is sufficient.
Paper not feeding properly
- Reinstall the paper roll correctly.
- Avoid overloading the paper compartment.
- Ondoa karatasi iliyokwama kwa uangalifu.
Programu haijibu
- Funga na ufungue tena programu.
- Check app permissions (Bluetooth, storage).
- Anzisha upya simu yako.
Utunzaji na Utunzaji
- Tumia only recommended thermal paper to avoid print head damage.
- Keep the printer dry and away from heat or direct sunlight.
- Clean the print head periodically with a soft, dry cloth.
- Do not pull paper forcefully while printing.
- Charge the battery at least once every 2–3 months if not in use.
- Avoid dropping or applying pressure to the device.
- Store in a dust-free environment when not in use.
Utangulizi wa Bidhaa
1.1 Orodha ya Ufungashaji
O The quantity and specifications of the paper roll(s) are tailored to the package you’ve chosen.
1.2 Maagizo ya Sehemu za Printa
Kuanza
2.1 Kupakua Programu
Tafuta the “FaithTag” app on App Store@ or Google PlayTM for download and installation.
2.2 Mwongozo wa Mtumiaji
O Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment. For detailed instructions, refer to the manual section “3. Replacing the Paper Roll.”
Ili kuwasha kichapishi, bonyeza Kitufe cha Nishati kwa muda mrefu kwa sekunde tatu hadi Mwanga wa Kiashirio uwashe.
Open the “FaithTag"Programu. 
Ruhusa za kutoa.
Bofya [Unganisha] juu.
Connection complete. Tap the homepage to view scriptures.
View scripture details, then tap print.
Access preview, then tap [Print].
Uchapishaji umekamilika.
Vunja lebo kwenye Njia ya Kutoka ya Karatasi.
Ondoa msaada.
Bandika lebo kwenye sehemu kavu na bapa.
Kiolesura cha programu ni cha kumbukumbu tu. Tafadhali rejelea ukurasa halisi wa uendeshaji kwa taarifa sahihi.
Kubadilisha Roll ya Karatasi
Chukua karatasi mpya kabisa.
O Please skip this step if the paper roll you have is not newly purchased and boxed.
Push the Cover Open Button towards the arrow to take out the Paper RollSpindle.
Vuta inayohamishika damper to remove the paper roll to be replaced.
Some paper rolls include tubes. Remove the paper tube after running out.
Ingiza sehemu moja ya spindle kwenye roll ya karatasi ili kusakinishwa.
Sakinisha tena Kifaa cha Kuhamishika cha Damper na kusukuma kwa makali ya roll karatasi.
Ondoa Kibandiko cha Kuzuia Kulegea kutoka kwenye safu ya karatasi.
Weka roll ya karatasi kwenye Sehemu ya Karatasi.
Vuta Uviringishaji wa Karatasi hadi uenee zaidi ya Nafasi ya Pato la Karatasi, na kisha funga Jalada la Kugeuza.
Maagizo ya Usalama
5.1 Maagizo ya Kichwa cha Kukata Mwongozo na Chapisha
Warning: Sharp edges on Manual Cutter! Do not touch the edges.
Warning: HOT component! Touching it when it is hot can cause burns to your fingers. Please wait for at least 30 minutes after turning off the power before touching it.
5.2 Maagizo ya Kuchaji
1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2. Insert the Type-C end (flat end) of the USB cable into F21’s Type-C Charger Port and plug the Type-A end (wide end) into the Type-A port of the power adapter.
3. After connecting and plugging in, please check the status of the printer indicator light. When the printer is charging, the indicator light will be flashing slowly with a “white light”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge:when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen.
6. Once the battery is fully charged, please unplug the charger promptly.
O Avoid using the printer while charging.Using the printer while charging may lead to reduced charging speed, compromised print quality, and shortened battery life.
5.3 Kusafisha na Matengenezo
O Please make sure the printer is turned off before performing any cleaning or maintenance.
Ukikumbana na masuala kama vile mistari tupu, uchapishaji ukungu, au herufi zinazokosekana, inaweza kusababishwa na uchafu kwenye Kichwa cha Kuchapisha. Tafadhali fuata hatua hizi:
If you have just finished printing, wait for at least 30 minutes for the Print
01 Head to cool down completely. Use a cotton swab dipped in alcohol or a print head cleaning pen (purchased
02 separately) to gently wipe the surface of the Print Head about 5 times to remove any dust and stains. Wait 5-10 minutes for the alcohol to evaporate completely. Thus, the cleaning
03 is done, and you can continue using the printer.
Taarifa kwa Mtumiaji
6.1 ONYO LA FCC
Kifaa hiki kinatii sehemu ya 15 ya Sheria za FCC.
Operation is subject to the ollowing two conditions:
(1) kifaa hiki hakiwezi kusababisha mwingiliano unaodhuru, na
(2) kifaa hiki lazima kikubali uingiliaji wowote uliopokewa, ikiwa ni pamoja na kuingiliwa ambayo inaweza kusababisha uendeshaji usiohitajika.
Mabadiliko yoyote au marekebisho ambayo hayajaidhinishwa waziwazi na mhusika anayehusika na utiifu yanaweza kubatilisha mamlaka ya mtumiaji kuendesha kifaa.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correct the interference at his own expense.
Kifaa kimetathminiwa ili kukidhi taarifa ya jumla ya kukaribiana na RF.
Kifaa kinaweza kutumika katika hali ya kuambukizwa inayoweza kubebeka bila kizuizi.
6.2 ILANI YA ISED (Kanada)
- Kiingereza:
This device contains licence-exempt that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s).
Operesheni inategemea masharti mawili yafuatayo:
(1) Kifaa hiki hakiwezi kusababisha usumbufu.
(2) Kifaa hiki lazima kikubali kuingiliwa yoyote, ikiwa ni pamoja na kuingiliwa kunaweza kusababisha uendeshaji usiohitajika wa kifaa.
Taarifa ya kukaribiana na IC RF:
Kifaa kimetathminiwa ili kukidhi mahitaji ya jumla ya kukaribiana na IC RF. Kifaa kinaweza kutumika katika hali ya kuambukizwa inayoweza kubebeka bila kizuizi.
WARNING Please pay attention to electrical safety. Do not disassemble, crush or puncture the battery. This product is not a toy.
Vidokezo Maalum
Kampuni inachukua jukumu kamili la kusahihisha na kufafanua mwongozo huu, ikitumia bidii kubwa ili kuhakikisha usahihi wake.
Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, theactual product may vary slightly from the images. Please refer to the physical product for accurate representations.
Nyaraka / Rasilimali
 |
Printa Ndogo ya TECH F21 [pdf] Mwongozo wa Mtumiaji 2BSMY-F21, 2BSMY-F21, Printa Ndogo ya F21, F21, Printa Ndogo, Printa |