320SZ Safety Data Sheet

Section 1: Name of the substance/mixture and of the company/undertaking

1.1 Product identifier

• Product form: Mixture
• Product name: 320SZ
• UFI: RFV0-90JH-W002-R90E

1.2 Relevant identified uses of the substance or mixture and uses advised against

• Identified uses: Cooling lubricant
• Uses advised against: No further information available

1.3 Details of the supplier

Manufacturer/Supplier: Danfoss Commercial Compressors S.A

Address: Rue du Pou du Ciel, 01600 Reyrieux - France

Contact: T +33 (0)4 74 00 28 29, contact.cc@danfoss.com

SDS Provider: DLAC Dienstleistungsagentur Chemie GmbH, E-mail: sds@dlac-gmbh.de

1.4 Emergency telephone number

Section 2: Hazards identification

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) 1272/2008 [CLP]: Hazardous to the aquatic environment – Chronic 3, H412.

For the meaning of H-phrases, see Section 16.

Harmful physical-chemical effects and health and environmental effects: Harmful long-term effects for aquatic organisms.

2.2 Label elements

Labelling according to Regulation (EC) No. 1272/2008 [CLP]:

• Signal word (CLP): -
• Hazard statements (CLP): H412 - Harmful long-term effects for aquatic organisms.
• Precautionary statements (CLP): P273 - Avoid release to the environment. P501 - Dispose of contents/container to an approved waste disposal plant, in accordance with local, regional, national and/or international regulations.

2.3 Other hazards

The mixture does not contain substances classified as PBT or vPvB in concentrations above 0.1%. The mixture does not contain substances listed in accordance with Article 59(1) of REACH for endocrine-disrupting properties or identified as having endocrine-disrupting properties according to the criteria in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at a concentration of 0.1% by weight or more.

Section 3: Composition/information on ingredients

3.1 Substances

Not applicable

3.2 Mixtures

For the meaning of H-phrases, see Section 16.

Section 4: First aid measures

4.1 Description of first aid measures

• General advice: Seek medical attention if discomfort occurs. Have SDS, packaging or label at hand. Never give anything by mouth to an unconscious person. Place victims in a recovery position.
• First aid after inhalation: Move person to fresh air and keep comfortable for breathing.
• First aid after skin contact: Immediately remove all contaminated clothing. Wash with plenty of soap and water.
• First aid after eye contact: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• First aid after ingestion: Rinse mouth. Give plenty of water to drink as a precautionary measure. Do NOT induce vomiting.

4.2 Most important symptoms and effects, both acute and delayed

Symptoms/injuries: No significant risk expected under normal use conditions.

4.3 Indication of any immediate medical attention and special treatment needed

Treat symptomatically.

Section 5: Firefighting measures

5.1 Extinguishing media

• Suitable extinguishing media: Adapt extinguishing equipment to surroundings. Carbon dioxide. Dry chemical powder. Water spray. For large fires: alcohol-resistant foam.
• Unsuitable extinguishing media: Do not use a solid water stream.

5.2 Special hazards arising from the substance or mixture

Hazardous decomposition products: Carbon dioxide. Carbon monoxide. Toxic gases, vapours.

5.3 Advice for firefighters

• Firefighting instructions: Use water spray or fog to cool exposed containers. Do not let (excess) extinguishing water enter the environment.
• Protective equipment for firefighters: Wear self-contained breathing apparatus and protective suit.

Section 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

• General measures: Ensure adequate ventilation. Do not inhale vapours. Avoid contact with skin and eyes.
• For non-emergency personnel: Evacuate unnecessary personnel.
• For emergency responders: Use prescribed personal protective equipment. In case of insufficient ventilation, wear respiratory protection. For more information, see Section 8: "Exposure controls/personal protection".

6.2 Environmental precautions

Prevent the substance from entering drains or municipal water.

6.3 Methods and material for containment and cleaning up

• Cleaning methods: Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid binder, universal binder). Collect with inert solid material such as clay or kieselguhr as soon as possible. Store in suitable, closed containers for disposal. Dispose of in accordance with applicable local regulations.

6.4 Reference to other sections

For personal protective equipment to be used, see Section 8. See Section 13 for handling of waste resulting from cleaning.

Section 7: Handling and storage

7.1 Precautions for safe handling

• Precautions for safe handling: Ensure good ventilation at the workplace. Avoid inhaling vapours, spray. Avoid contact with skin and eyes. Wear personal protective equipment.
• Measures for hygiene: Handle according to industrial practice and safety regulations. Wash hands and other exposed parts with water and mild soap before eating, drinking, smoking and after work. Do not eat, drink or smoke during handling. Contaminated clothing should be washed before reuse.

7.2 Conditions for safe storage, including any incompatibilities

• Storage conditions: Store in original container. Keep container tightly closed. Store in a dry, cool, well-ventilated place. Protect from heat and direct sunlight.
• Incompatible materials: Store separately from foodstuffs and animal feed.

Section 8: Exposure controls/personal protection

8.1 Control parameters

No further information available

8.2 Exposure controls

• Appropriate engineering controls: Ensure local exhaust ventilation and general room ventilation to minimize vapour concentrations.
• Hand protection: Use suitable protective gloves (EN 374). Rubber (natural, latex), polyvinyl chloride (PVC), nitrile rubber. > 0.35 mm. The exact penetration time must be obtained from the glove manufacturer and observed.
• Eye protection: Chemical safety goggles or safety glasses (EN 166).
• Skin protection: Wear suitable protective clothing.
• Respiratory protection: If handling the substance may lead to inhalation, respiratory protective equipment is recommended.
• Environmental exposure controls: Avoid release to the environment.

Section 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties

• Physical state: Liquid
• Colour: Colourless to yellow
• Odour: Mild
• Melting point/freezing point: No data available
• Boiling point or initial boiling point and boiling range: No data available
• Flammability: No data available
• Lower and upper explosion limit: No data available
• Flash point: 265 °C (Cleveland Open Cup)
• Auto-ignition temperature: No data available
• Decomposition temperature: No data available
• pH: No data available
• Kinematic viscosity: 67 mm²/s (40 °C); 9.2 mm²/s (100 °C)
• Solubility: Water: practically insoluble
• Partition coefficient n-octanol/water (log value): Not applicable
• Vapour pressure: No data available
• Density and/or relative density: 0.982 (20 °C)
• Relative vapour density: No data available
• Particle characteristics: Not applicable

9.2 Other information

• Information on physical hazards: Explosive properties: None. Oxidising properties: None.
• Other safety characteristics: No further information available.

Section 10: Stability and reactivity

10.1 Reactivity

No hazardous reactions known.

10.2 Chemical stability

Stable under recommended storage and handling conditions (see Section 7).

10.3 Possibility of hazardous reactions

None under normal use.

10.4 Conditions to avoid

High temperatures. Sources of ignition.

10.5 Incompatible materials

Oxidising agents. Strong acids. Strong alkaline compounds.

10.6 Hazardous decomposition products

No hazardous decomposition products are known at room temperature. In case of fire: Carbon dioxide. Carbon monoxide. Toxic gases, vapours.

Section 11: Toxicological information

11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008

• Acute toxicity: Not classified. Based on available data, classification criteria are not met.
• Skin corrosion/irritation: Not classified. Based on available data, classification criteria are not met.
• Serious eye damage/eye irritation: Not classified. Based on available data, classification criteria are not met.
• Respiratory or skin sensitisation: Not classified. Based on available data, classification criteria are not met.
• Germ cell mutagenicity: Not classified. Based on available data, classification criteria are not met.
• Carcinogenicity: Not classified. Based on available data, classification criteria are not met.
• Reproductive toxicity: Not classified. Based on available data, classification criteria are not met.
• Specific target organ toxicity – single exposure: Not classified. Based on available data, classification criteria are not met.
• Specific target organ toxicity – repeated exposure: Not classified. Based on available data, classification criteria are not met.
• Aspiration hazard: Not classified. Based on available data, classification criteria are not met.

11.2 Other hazards

11.2.1 Endocrine disrupting properties

Endocrine-disrupting properties for human health: The mixture has no endocrine-disrupting properties.

11.2.2 Other information

Possible harmful effects on humans and possible symptoms: Based on available data, classification criteria are not met.

Section 12: Ecological information

12.1 Toxicity

• Acute aquatic toxicity: Not classified.
• Chronic aquatic toxicity: Harmful long-term effects for aquatic organisms.

12.2 Persistence and degradability

No further information available

12.3 Bioaccumulative potential

No further information available

12.4 Mobility in soil

No further information available

12.5 Results of PBT and vPvB assessment

Does not meet the criteria for persistent, bioaccumulative and toxic (PBT), very persistent and very bioaccumulative (vPvB).

12.6 Endocrine disrupting properties

Endocrine-disrupting properties for the environment: The mixture has no endocrine-disrupting properties.

12.7 Other adverse effects

No further information available

Section 13: Disposal considerations

13.1 Waste treatment methods

• Local/national regulations (waste): Handle waste safely in accordance with local/national regulations.
• Waste treatment methods: Do not discharge into drains.
• Recommendations for waste disposal: Empty containers completely before disposal.
• Waste codes: EWC waste codes are not product- but origin-related. The manufacturer can therefore not specify a waste code for products used in different industries. The specified codes should be considered a recommendation for the user.

Section 14: Transport information

According to ADR / IMDG / IATA requirements:

14.1 UN number or id number

• UN No. (ADR): Not applicable
• UN No. (IMDG): Not applicable
• UN No. (IATA): Not applicable

14.2 UN proper shipping name

• UN proper shipping name (ADR): Not applicable
• UN proper shipping name (IMDG): Not applicable
• UN proper shipping name (IATA): Not applicable

14.3 Transport hazard class(es)

• ADR Transport hazard class(es): Not applicable
• IMDG Transport hazard class(es): Not applicable
• IATA Transport hazard class(es): Not applicable

14.4 Packing group

• Packing group (ADR): Not applicable
• Packing group (IMDG): Not applicable
• Packing group (IATA): Not applicable

14.5 Environmental hazards

• Environmental hazard: No
• Marine pollutant: No
• Other information: No further information available.

14.6 Special precautions for user

• Road transport: Not applicable
• Sea transport: Not applicable
• Air transport: Not applicable

14.7 Transport in bulk according to Annex II of MARPOL and the IBC Code

Not applicable

Section 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture

15.1.1 EU regulations

• REACH Regulation (Annex XIV) (List of substances subject to authorisation): Contains no substances listed in REACH Annex XIV (authorisation list/list of substances requiring authorisation).
• REACH Candidate List (SVHC): Contains no substances listed on the REACH Candidate List (Candidate List of SVHC for authorisation).
• PIC Regulation (Prior Informed Consent): Contains no substances included in the PIC list (Regulation (EU) 649/2012 concerning the export and import of hazardous chemicals).
• POP Regulation (Persistent Organic Pollutants): Contains no substances covered by Regulation (EU) 2019/1021 on persistent organic pollutants.
• Ozone Depletion Regulation: Contains no substances listed as ozone-depleting substances (Regulation (EU) 2024/590 on substances that deplete the ozone layer).

15.1.2 National regulations

No further information available

15.2 Chemical safety assessment

No chemical safety assessments have been carried out for the substances in this preparation.

Section 16: Other information

16.1 Data sources

EUROPEAN PARLIAMENT AND COUNCIL REGULATION (EC) No 1272/2008 of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006.

16.2 Abbreviations and acronyms

• ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
• ATE: Acute Toxicity Estimate
• CLP: Regulation (EC) No 1272/2008 on classification, labelling and packaging of substances and mixtures
• DMEL: Derived Minimal Effect Level
• DNEL: Derived No-Effect Level
• EC50: Effective Concentration 50%
• IATA: International Air Transport Association
• IMDG: International Maritime Dangerous Goods Code
• LC50: Lethal Concentration 50%
• LD50: Lethal Dose 50%
• LOAEL: Lowest Observed Adverse Effect Level
• NOAEC/L: No Observed Adverse Effect Concentration/Level
• NOEC/L: No Observed Effect Concentration/Level
• OECD: Organisation for Economic Co-operation and Development
• PBT: Persistent, Bioaccumulative and Toxic substance
• PNEC: Predicted No-Effect Concentration
• REACH: Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals
• SDS: Safety Data Sheet
• STP: Sewage Treatment Plant
• UFI: Unique Formula Identifier
• vPvB: very Persistent and very Bioaccumulative substance

16.3 Phrases relating to H and EUH statements

• Aquatic Acute 1: Hazardous to the aquatic environment – acute hazard, category: acute 1
• Aquatic Chronic 1: Hazardous to the aquatic environment – chronic hazard, category: chronic 1
• Repr. 2: Reproductive toxicity, category 2
• H361: Suspected of damaging fertility or the unborn child.
• H400: Very toxic to aquatic life.
• H410: Very toxic to aquatic life with long lasting effects.
• H412: Harmful long-term effects for aquatic organisms.

16.4 Other information

SDS EU (REACH Annex II)

This information is based on our current knowledge and is intended to describe the product only with regard to health, safety and environmental requirements. It should therefore not be interpreted as a guarantee of any specific property of the product.