Advantech Co-Creating the Future of the IoT WorldOnline Support - Advantech
User Manual for ADVANTECH models including: 32-Channel Isolated Digital Input Card, PCI-1733
1 Startup Manual. Packing List. Before installation, please make sure that you have received the following: ▫ PCI-1733 card. ▫ Driver CD. ▫ Quick Start User ...
PCI-1733-BE: Giriş/çıxış plataları ADVANTECH — Azərbaycan, AaBaCus Tech
File Info : application/pdf, 4 Pages, 370.32KB
DocumentDocumentSTARTUP MANUAL PCI-1733 32-channel Isolated Digital Input Card Packing List Before installation, please make sure that you have received the following: PCI-1733 card Driver CD Quick Start User Manual If anything is missing or damaged, contact your distributor or sales representative immediately. User Manual For more detailed information on this product, please refer to the PCI-1730_1733_1734 User Manual on the CD-ROM (PDF format). CD:\Documents\Hardware Manuals\PCI\PCI-1730 Declaration of Conformity FCC Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference in which case the user is required to correct interference at his own expense. CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. Overview The Advantech PCI-1733 is a 32-channel isolated digital input card for the PCI bus. For easy monitoring, each isolated digital input channel is equipped with one red LED, and each isolated digital output channel is equipped with one green LED to show its ON/OFF status. The PCI1733's isolated digital input channels are ideal for digital input in noisy environments or with floating potentials. The PCI- 1733 provides specific functions for different user requirements. Specifications Isolated Digital Input Number of Channels 32 (bi-directional) Optical Isolation 2,500 VDC Opto-isolator response time 100 µs Over-voltage Protection 70 VDC Input Voltage VIH (max.) 30 VDC VIH (min.) 5 VDC VIL (max.) 2 VDC 5 VDC 1.4 mA (typical) Input Current 12 VDC 3.9 mA (typical) 24 VDC 8.2 mA (typical) 30 VDC 10.3 mA (typical) General I/O Connector Type 37-pin D-Sub female Dimensions 175 mm x 100 mm ( 6.9" x 3.9" ) Power Consumption Typical Max. +5 V @ 200 mA +12 V @ 50 mA +5 V @ 350 mA Operation 0 ~ +60°C (32~ 140°F ) Temperature (refer to IEC 68 -2 - 1 ,2) Storage -20 ~ +70°C (-4 ~158°F) Relative Humidity Certification 5 ~ 95% RH non-condensing (refer to IEC 60068-2-3) CE/FCC Notes For more information on this and other Advantech products, please visit our websites at: http://www.advantech.com For technical support and service: http://www.advantech.com/support/ This startup manual is for PCI-1733. Part No: 2003173301 2nd Edition June 2015 1 Startup Manual Software Installation Hardware Installation 1. Turn off your computer and unplug the power cord and cables. TURN OFF your computer before installing or removing any components on the computer. 2. Remove the cover of your computer. 3. Remove the slot cover on the back panel of your computer. 4. Touch the metal surface of your computer to neutralize any static electricity that may be on your body. 5. Insert the PCI-1733 card into a PCI slot. Hold the card only by its edges and carefully align it with the slot. Insert the card firmly into place. Use of excessive force must be avoided, otherwise the card might be damaged. 6. Fasten the bracket of the PCI card on the back panel rail of the computer with screws. 7. Connect appropriate accessories (37-pin cable, wiring terminals, etc. if necessary) to the PCI card. 8. Replace the cover of your computer chassis. Reconnect the cables you removed in step 2. 9. Plug in the power cord and turn on the computer. Startup Manual 2 Switch and Jumper Settings The following figure showa card connector, jumper and switch locations PIN Assignments Board ID Settings ID3 ID2 ID1 ID0 1 1 1 1 1 1 1 0 1 1 0 1 1 1 0 0 1 0 1 1 1 0 1 0 1 0 0 1 1 0 0 0 0 1 1 1 0 1 1 0 0 1 0 1 0 1 0 0 0 0 1 1 0 0 1 0 0 0 0 1 0 0 0 0 Note: On: 1, Off: 0 Board ID 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Startup Manual 3 Connection Isolated Digital Input Each of the 16 isolated digital input channels accept voltages from 5 to 30 V. Every eight input channels share one external common. (Channels 0 ~ 7 use ECOM0. Channels 8 ~ 15 use ECOM1.) The following figure shows how to connect an external input. Startup Manual 4