IDEC FC6A-J8A1 8pt Voltage Njia ya Sasa ya Kuingiza
Vipimo
- Bidhaa: IDEC FC6A Plus PLC
- Mifumo ya Uendeshaji: Windows 10/Windows 11
- Power Supply: 24V DC
- Connectivity: 2 Ethernet ports (Port 1 used for AWS IoT Core)
Taarifa ya Hati
Historia ya marekebisho ya hati
Mifumo ya uendeshaji inayotumika kwa mwongozo huu
Operation System: Windows 10/Windows 11
Zaidiview
IDEC FC6A is a multifunctional PLC equipped with powerful IoT capabilities, all within compact hardware.
It supports the MQTT protocol, allowing the PLC to connect to MQTT brokers and cloud services. Additionally, it features a dedicated user interface for connecting to AWS IoT Core, enabling PLC programmers to easily establish communication between the PLC and AWS IoT Core.
Mwongozo huu unaeleza jinsi ya kuunganisha IDEC FC6A Plus PLC kwa AWS IoT Core.
Maelezo ya Vifaa
Datasheet/Brochure
https://us.idec.com/idec-us/en/USD/Programmable-Logic-Controller/Micro-PLC/FC6A-MicroSmart-PLC/c/MicroSmart_FC6A?page=1
Vipengee Vilivyotolewa na Mtumiaji
The package for the FC6A Plus CPU unit includes only the CPU unit and the I/O terminal block. Please note that you will need to provide a USB cable (USB-A to USB Mini-B) and a 24V power supply separately.
Bidhaa za mtu wa tatu zinazoweza kununuliwa
Hakuna
Weka Mazingira Yako ya Maendeleo
Ufungaji wa zana (IDE, Minyororo ya zana, SDK)
Programu ya WindLD inahitajika ili kupanga programu ya PLC. IDEC inatoa kifurushi cha Kuratibu Uendeshaji, ambacho kinajumuisha programu ya WindLDR. Nambari ya sehemu ya kununua Kipanga Kiotomatiki ni SW1A-W1C. Tafadhali wasiliana na kisambazaji cha IDEC au muuzaji rejareja wa mtandaoni aliyeidhinishwa.
https://us.idec.com/idec-us/en/USD/Software/Automation-Organizer/p/SW1A-W1C
Set Up Device Hardware
- <Power Supply>
The IDEC FC6A Plus requires a 24V DC power supply. Connect the 24V power supply unit to the connector on the FC6A. - <Internet Connection>
The FC6A Plus has two Ethernet ports. Port 1 is located on the upper side, and Port 2 is on the lower side of the unit. To connect to AWS IoT Core, use Port 1 (upper side).
Set up your AWS account and permissions
If you do not have an existing AWS account and user, refer to the online AWS documentation titled “Set Up Your AWS Account.” To get started, follow the steps outlined in the sections below:
- Jisajili kwa akaunti ya AWS
- Unda mtumiaji wa utawala
- Open the AWS IoT Console
Unda Rasilimali za IoT za AWS
Refer to the online AWS documentation at Create AWS IoT Resources. Follow the steps outlined in the sections below to provision resources for your device:
- Create an AWS IoT policy
- Create a Thing object
Toa Kifaa na Vitambulisho
Refer to pages 12 and 18 in the following document.
These sections explain how to download the Root (Server) CA, the certificate file kwa FC6A, na ufunguo wa faragha file, pamoja na jinsi ya kuziingiza kwenye FC6A.
Build the Demo
Refer to pages 1 to 22 in the following document. These pages explain how to connect the FC6A to AWS IoT Core. Follow the step-by-step tutorial to complete the connection process.
Endesha Onyesho
Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.
Thibitisha ujumbe katika AWS IoT Core
Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw
Kutatua matatizo
Refer to page 33 in the following document, which details the MQTT connection error codes.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw
Kwa habari zaidi, tafadhali rejelea hati za mtandaoni za AWS kuhusu Utatuzi wa matatizo ya AWS IoT.
Maswali Yanayoulizwa Mara Kwa Mara
What is the power supply requirement for IDEC FC6APlus?
The IDEC FC6A Plus requires a 24V DC power supply.
Where can I find the necessary software for programming the PLC application?
You can install WindLDR software from the Automation Organizer suite, available for purchase with part number SW1A-W1C.
Which Ethernet port should be used for connecting to AWS IoT Core?
Port 1 (upper side) of the FC6A Plus should be used for connecting to AWS IoT Core.
Nyaraka / Rasilimali
 |
IDEC FC6A-J8A1 8pt Voltage Njia ya Sasa ya Kuingiza [pdf] Mwongozo wa Mtumiaji FC6A-J8A1 8pt Voltage Moduli ya Sasa ya Kuingiza, FC6A-J8A1, 8pt Voltage Njia ya Sasa ya Kuingiza, Voltage Njia ya Sasa ya Kuingiza, Moduli ya Sasa ya Kuingiza, Moduli ya Kuingiza, Mod |