ICERIVER KAS KS 3 ASIC Mining Machine

Vipimo

• Model: KS3&3L&3M
• Power Input: 200V-250V, 50-60Hz
• Interface: Ethernet Port, TF card slot, Reset Button, Power Button, Power Supply, IP Button

Bidhaa Imeishaview

Muonekano

Maelezo ya Kiashirio

Vipimo vya kiolesura

Kazi

Anza

Tahadhari

• Angalia ikiwa kuna mwingiliano wa kimwili unaosababisha uharibifu kwa mashine, na jihadhari na mshtuko wa umeme.
• Tafadhali angalia ikiwa muunganisho wa kebo ni thabiti kabla ya kuwasha, na uzingatie usalama wa umeme.
• Weka ubao wa hashi na sehemu zingine mbali na maji au wazi kwa unyevu.
• Tafadhali hakikisha halijoto iliyoko ni kati ya 0-40°C.
• Tafadhali epuka kufunika uso wa mashine kwa sababu ya joto la juu la uso wa mashine wakati wa operesheni.
• Usiweke vitu vinavyoweza kuwaka na kulipuka karibu na mashine wakati wa operesheni.
• Tafadhali hakikisha unyevu wa mazingira uko chini ya 90%.
• Tafadhali weka mazingira safi ili kuzuia vumbi, nywele, Willow, na vitu vingine vya kigeni kuingia kwenye mashine na kusababisha uharibifu kwa mashine.
• Tumia juzuu thabititage.
• The machine, hash boa, rd, or board parts being crushed or burned due to improper environment are not covered by the warranty.
• Wateja hawapaswi kutenganisha mashine peke yao bila ruhusa kutoka kwa timu ya baada ya mauzo ya ICERIVER.

Angalia kabla ya kuanza

Ukaguzi wa awali wa mchimbaji kabla ya operesheni:

• Angalia kuonekana kwa mfuko kwa deformation.
• Angalia kuonekana kwa mashine kwa deformation na kuvunjika. Pia, angalia shabiki na kebo.
• Angalia ikiwa kuna sauti yoyote ya kushangaza kwenye mashine na uangalie ikiwa bomba la joto limezimwa.

Kumbuka: Tafadhali usisambaze mashine peke yako. Mashine haitafunikwa na dhamana ikiwa mtumiaji atatenganisha mashine bila ruhusa.

Boot

• Please connect the miner to the Ethernet first, and then plug in the power cord. Turn on the machine, and during the boot process, the red and green indicator lights on both sides will remain steady. Wait until the D2 indicator light blinks (if it doesn’t blink for more than 10 minutes, please check the network), and the D1, D3, and D4 indicator lights all go off. This indicates that the miner has started successfully.

Mashine ya Kufikia

Pata IP ya mashine

1. Pata anwani ya IP ya mashine kwa kupakua na kufungua zana ya usindikaji wa kundi iliyotolewa na kampuni yetu (tafadhali rejelea afisa webtovuti ya kupakua:
   https://iceriver.eu/pages/product-manuals-tools
2. Click the [Detect IP] button and long-press the machine’s IP button for 1-2 seconds after the pop-up window to get the machine IP.

Mashine ya Kufikia

1. Fungua yako web kivinjari (kivinjari cha Chrome kinapendekezwa) na uweke anwani ya IP ya mashine kwenye upau wa anwani. Utaona kiolesura kifuatacho.
2. Tumia jina la mtumiaji chaguo-msingi "admin" na nenosiri chaguo-msingi la kuingia "12345678" ili kuingia kwenye mashine.

Kubadilisha Lugha

1. Bofya [Lugha] katika kona ya juu kulia ya ukurasa ili kubadilisha kati ya Kichina na Kiingereza.

Badilisha Nenosiri

Ili kulinda usalama wa mali yako, tafadhali badilisha nenosiri la mchimbaji baada ya kuwasha mashine kwa mara ya kwanza.

1. Bofya [Mipangilio ya Mtumiaji], weka nenosiri la sasa na nenosiri jipya kama inavyoonyeshwa hapa chini, na ubofye kitufe cha [Hifadhi].
2. Baada ya mabadiliko ya nenosiri kukamilika, unahitaji kuingia tena na nenosiri jipya.

Kusanidi mabwawa ya madini na pochi

Ongeza

1. Nenda kwenye ukurasa wa [Mipangilio ya Madini] na utafute [Usanidi wa Dimbwi].Unaweza kusanidi mabwawa matatu ya uchimbaji madini ukitumia mfano ufuatao wa marejeleoample: Pool1:stratum+tcp://kas.eu1.whalepool.com:15121
   Mkoba/Mfanyakazi:
   kaspa:ndm9tlsgdmrcha4pg83lwwrka0gjya38teh0g5qc4prapavmh7rkyxuzd6w2w.worker
   • Anwani ya Wallet
   • Jina la mfanyakazi
2. Bofya Hifadhi, na dirisha la mafanikio ya usanidi litatokea.
3. Baada ya usanidi uliofaulu, bofya [Washa upya] na usubiri mashine kuwasha upya (usizime wakati wa mchakato wa kuwasha upya).
4. Taarifa kwenye ukurasa wa nyumbani inaonyesha kwamba bwawa " limeunganishwa ", ambayo ina maana kwamba bwawa limeunganishwa kwa ufanisi.
   • Usanidi chaguo-msingi wa bwawa ni usanidi wa kampuni yetu. Unapojaribu, tafadhali sanidi anwani yako ya pochi ya kuchimba madini kabla ya kuanza kuchimba madini. Tafadhali usitumie usanidi chaguo-msingi.
   • Ikiwa bwawa 1 halijaunganishwa, mashine itaunganishwa kiotomatiki kwenye bwawa 2. Ikiwa bwawa la 2 halijaunganishwa, mashine itaunganishwa kiotomatiki kwenye bwawa la 3.
   • Ikiwa usanidi utashindwa, unaweza kuisanidi tena na kuianzisha tena.

The following mining pools are known to be compatible, and will be continuously updated: KS0,1,2,3L,3M compatible mining pools:

• Taarifa iliyo hapo juu ya bwawa la madini ni anwani ya bwawa la madini tulilotumia kwa madhumuni ya majaribio. Kabla ya kuunganisha kwenye bwawa la uchimbaji madini, tafadhali ingia kwa afisa wa bwawa la madini husika webtovuti na uangalie ikiwa anwani ya bwawa la madini imebadilika.

Ondoa

1. Futa maelezo katika [Usanidi wa Dimbwi] na ubofye [Hifadhi] ili kuondoa kidimbwi cha uchimbaji madini.

Kurekebisha kasi ya shabiki

1. Pata [Usanidi wa Vifaa] katika [Mipangilio ya Uchimbaji].
2. Angalia [Kasi ya shabiki].
3. Select the operating mode or manually adjust the fan speed (Note: After manually adjusting the fan speed, the automatic speed control function will be disabled; be cautious of high temperatures). After making the changes, click on “Save.”
   • After powering on, the fan will operate at a low speed. Only after the self-check process, the fan starts running at full speed. The default fan speed is set to maximum. If the self-check detects any fan abnormalities, the mining process will not begin.
   • Mashine itaacha kuchimba madini katika hali ya kulala.

View Chati ya Hashrate

Bofya [Nyumbani] ili view Chati ya Hashrate.

• Baada ya dakika 5 ya kuunganisha kwenye bwawa, unaweza view the miner’s hashrate and the hashrate chart. The chart is updated every 5 minutes.
• Chini ya bodi ya Hash, unaweza view joto la mashine na kasi ya shabiki, ambayo inaweza kufuatilia hali ya kazi ya mashine kwa wakati halisi.

Mipangilio ya Mtandao

The factory default is DHCP mode; users can set the IP mode according to their needs. Set static IP:

1. Bofya [Mipangilio ya IP], chagua Tuli katika [Itifaki], jaza maelezo ya IP kulingana na mtumiaji, kisha ubofye kitufe cha [Hifadhi].
2. Baada ya kuhifadhi usanidi, bofya [Washa upya] na usubiri mashine iwashe upya (usizime wakati wa kuwasha upya).

Uboreshaji wa Firmware

Wakati rasmi webtovuti inatoa kifurushi kipya cha sasisho, pakua na usasishe kupitia faili ya Web.

1. Bofya [Uboreshaji wa Firmware], chagua kifurushi rasmi cha kuboresha, na ubofye [Boresha].
2. Subiri hadi kidirisha ibukizi kionyeshe mafanikio kisha ubofye [Washa upya] na usubiri mashine kuwasha upya (usizime wakati wa mchakato wa kuwasha upya).
3. Baada ya kuanza upya, uboreshaji wa firmware umefanikiwa.

Rudisha Kiwanda

Wakati mashine ina hali isiyo ya kawaida, unaweza kurejesha mipangilio ya kiwanda kupitia Kitufe cha Kupumzika kwenye mashine.

1. Press and hold the reset button for 5 seconds until the D3 and D4 lights start flashing simultaneously. After that, wait for the D3 and D4 lights to stop flashing and remain steady, indicating that the machine is in a reboot-ready state (Do not power off the machine during the reboot process).
2. Baada ya mashine kuwasha upya, panga upya bwawa la uchimbaji madini na pochi ili kuanza uchimbaji.

Zima/Washa upya

Zima

Zima mashine kupitia kitufe cha nguvu cha mchimbaji.

Washa upya

1. Bofya [Washa upya] katika kona ya chini kulia ya ukurasa wa nyumbani, kisha ubofye [Sawa] ili kuthibitisha, kisha uwashe upya mashine.
   KumbukaDousizime mashine wakati wa mchakato wa kuwasha upya.

Makosa ya Kawaida na Suluhisho

Ufumbuzi wa Makosa

Ugavi wa Nguvu

• Cannot turn on the machine after connecting the power and turning on the power button:
  1. Angalia ikiwa kiunganishi cha umeme kimelegea au kimezimwa, na ikiwa kamba ya umeme imeingizwa vizuri.
  2. Thibitisha kuwa ujazo wa usambazaji wa umemetage iko ndani ya ujazo maalum wa uendeshajitage mbalimbali (AC 180V - 285V).

Mtandao

• Mwanga wa mlango wa mtandao hauwashi:
  • Angalia ikiwa mlango wa mtandao umechomekwa.

Shabiki

• Kipeperushi hakiwashi baada ya nguvu kutumika:
  1. Angalia mwonekano wa feni na ikiwa mesh ya chuma imetolewa na kuharibika.
  2. Angalia ikiwa bwawa la uchimbaji madini limeunganishwa kwa mafanikio.

Joto la Juu

Halijoto ya mashine iko juu sana:

1. Angalia kuwa mashine haijafunikwa na.
2. Angalia ikiwa mashine imewekwa kwenye mazingira yenye convection ya hewa.

Hashrate haifikii kasi inayolengwa
Hashrate haifikii kiwango cha reli lengwa:

1. Check whether the machine fan is working properly. If the fan speed is abnormal, it will cause the machine temperature to be too high will triggering high-temperature protection.
2. Mabadiliko ya muda mfupi ya hashrate, tafadhali angalia wastani wa kasi ya saa 12.

Tofauti kati ya Web hashrate na hashrate ya bwawa la madini ni kubwa:

• Angalia ikiwa muunganisho wa mtandao ni wa kawaida.

Imeshindwa kuingia Web ukurasa wa operesheni

• Kivinjari kinaonyesha 404 baada ya kuingia IP ya mchimbaji:
  • Anzisha tena mashine na uingie tena Web ukurasa wa operesheni.

Nguvu ya wachimbaji hupungua hadi karibu 150W-200W

• The miner’s power will drop after the network abnormality. Please check the indicator light blinking condition, as well as the network condition.

FAQS

What should I do if the indicator lights do not show a successful startup?

If the D2 indicator light does not blink within 10 minutes of booting up, please check the network connection.

Nyaraka / Rasilimali

ICERIVER KAS KS 3 ASIC Mining Machine [pdf] Mwongozo wa Mtumiaji KAS KS 3, KAS KS 3 ASIC Mining Machine, ASIC Mining Machine, Mining Machine

Marejeleo

• Mwongozo wa Mtumiaji