DeepCool AK400 CPU Cooler Na Onyesho la Hali
Vipimo
- Mfano: DeepCool AK400 Digital CPU Cooler
- Utangamano wa Tundu
- Intel: LGA 1150/1151/1155/1156/1200/1700
- AMD: AM4/AM5
- Cooling Capacity (TDP): Hadi 220W
- Mabomba ya joto: 4 x 6mm direct-touch copper heat pipes
- Shabiki:
- Ukubwa: 120mm x 120mm x 25mm
- Aina: Fluid Dynamic Bearing (FDB)
- Kasi: 500-1850 RPM ±10%
- Mtiririko wa hewa: Up to 68.99 CFM
- Kiwango cha Kelele: ≤28 dB(A)
- Kiunganishi: PWM ya pini 4
- Imekadiriwa Voltage: 12V DC
- Matumizi ya Nguvu: 1.44W
- Taa ya LED: Addressable RGB
- Viunganishi: 3-pin (+5V-D-G) and 9-pin USB 2.0
- Vipimo:
- Kwa ujumla: 126mm (L) x 97mm (W) x 156mm (H)
- Heatsink: 120mm (L) x 60mm (W) x 152mm (H)
- Uzito: Takriban 695g
Maagizo ya Kusanyiko na Ufungaji
Zana Zinahitajika
- Phillips bisibisi
- Bandika la joto (ikiwa halijatumiwa mapema)
- Cleaning cloth or isopropyl alcohol (for CPU surface prep)
Step 1: Prepare the Motherboard
- Power off your PC and unplug all cables.
- Remove the existing CPU cooler if applicable.
- Clean the CPU surface using a lint-free cloth and isopropyl alcohol to remove old thermal paste.
Hatua ya 2: Sakinisha Backplate
- Place the provided motherboard backplate on the rear side of the motherboard.
- Align the holes of the backplate with the CPU socket mounting holes.
Step 3: Attach Standoffs
- Insert the standoffs through the motherboard aligned with the backplate.
- Tighten the standoffs gently; they will hold the cooler firmly in place.
Step 4: Apply Thermal Paste
- Weka kiasi kidogo cha pea ya kuweka mafuta katikati ya CPU.
- If your AK400 cooler comes with pre-applied thermal paste, skip this step.
Step 5: Mount the Cooler
- Align the AK400 cooler base over the CPU, ensuring the mounting holes match the standoffs.
- Carefully place the cooler onto the CPU and press gently.
- Secure the cooler using the provided screws in a diagonal pattern to ensure even pressure.
Step 6: Attach the Fan
- Attach the fan to the heatsink using the included clips or screws.
- Ensure the airflow direction is correct (usually indicated by arrows on the fan).
Step 7: Connect the Fan & Display
- Plug the fan power cable into the CPU_FAN header on the motherboard.
- Connect the status display cable to the appropriate motherboard or power header as specified in the manual.
Hatua ya 8: Ukaguzi wa Mwisho
- Double-check that all screws are tight and the cooler is secure.
- Ensure cables are connected and not obstructing the fan.
- Close the PC case and reconnect the power.
Step 9: Power On & Monitor
- Turn on your PC and check the status display for proper operation.
- Monitor CPU temperatures in BIOS or using software to ensure proper cooling performance.
Vidokezo
- Handle the cooler carefully; the display panel can be fragile.
- Do not overtighten screws; excessive pressure can damage the CPU or motherboard.
- Make sure airflow is not blocked by other components.
- After installing the product, turn on the PC, download and install the software, and the product-function control has been enabled on, webtovuti.www.deepcool.com/downloadpage/
- Mahitaji ya toleo la mfumo wa uendeshaji: Windows 10/Windows 11
Maswali Yanayoulizwa Mara kwa Mara
How do I install the AK400 Digital?
The cooler comes with an all-metal mounting bracket designed for easy installation on various platforms. Detailed installation instructions are provided in the user manual.
Je, ninaweza kubinafsisha taa ya RGB?
Yes, the AK400 Digital features addressable RGB lighting that can be customized using compatible software or motherboard RGB headers.
Nyaraka / Rasilimali
 |
DeepCool AK400 CPU Cooler Na Onyesho la Hali [pdf] Mwongozo wa Mtumiaji AK400 CPU Cooler Yenye Onyesho la Hali, AK400, Kipoozi cha CPU chenye Onyesho la Hali, Onyesho la Hali, Onyesho |