Danfoss AVQML DN15 na Vali Huru za Kudhibiti za DN20

Vipimo

• Mfano: AVQML DN15 & DN20
• Nambari ya Sehemu: AVQML / 73690560
• Shinikizo la Juu: PN25
• Shinikizo la Juu la Kiingilio: 800kPa (paa 8)
• Ukubwa wa Valve: 32 mm
• Torque ya kiwango cha juu: 15 Nm

Maagizo ya Matumizi ya Bidhaa

Usakinishaji:

1. Ensure the valve is compatible with your system and meets specifications.
2. Mount the AVQML valve in the appropriate DN size according to your requirements.
3. Kaza miunganisho yote kwa usalama ili kuzuia uvujaji.

Operesheni:

1. Check that the valve is in the closed position before starting the system.
2. Adjust the valve setting based on the flow rate required using the provided table.
3. Monitor the system for any irregularities or leaks during operation.

Mpangilio	DN 15			DN 15 HF			DN 20			DN 20 HF
	L / h	L / s	GPM	L / h	L / s	GPM	L / h	L / s	GPM	L / h	L / s	GPM
10%	80	0.022	0.35	130	0.036	0.57	125	0.035	0.55	190	0.053	0.84
15%	120	0.033	0.53	195	0.054	0.86	188	0.052	0.83	285	0.079	1.25
20%	160	0.044	0.70	260	0.072	1.14	250	0.069	1.10	380	0.106	1.67
25%	200	0.056	0.88	325	0.090	1.43	313	0.087	1.38	475	0.132	2.09
30%	240	0.067	1.06	390	0.108	1.72	375	0.104	1.65	570	0.158	2.51
35%	280	0.078	1.23	455	0.126	2.00	438	0.122	1.93	665	0.185	2.93
40%	320	0.089	1.41	520	0.144	2.29	500	0.139	2.20	760	0.211	3.35
45%	360	0.100	1.59	585	0.163	2.58	563	0.156	2.48	855	0.238	3.76
50%	400	0.111	1.76	650	0.181	2.86	625	0.174	2.75	950	0.264	4.18
55%	440	0.122	1.94	715	0.199	3.15	688	0.191	3.03	1045	0.290	4.60
60%	480	0.133	2.11	780	0.217	3.43	750	0.208	3.30	1140	0.317	5.02
65%	520	0.144	2.29	845	0.235	3.72	813	0.226	3.58	1235	0.343	5.44
70%	560	0.156	2.47	910	0.253	4.01	875	0.243	3.85	1330	0.369	5.86
75%	600	0.167	2.64	975	0.271	4.29	938	0.261	4.13	1425	0.396	6.27
80%1)	640	0.178	2.82	1040	0.289	4.58	1000	0.278	4.40	1520	0.422	6.69
85%	680	0.189	2.99	1105	0.307	4.87	1063	0.295	4.68	1615	0.449	7.11
90%	720	0.200	3.17	1170	0.325	5.15	1125	0.313	4.95	1710	0.475	7.53
95%	760	0.211	3.35	1235	0.343	5.44	1188	0.330	5.23	1805	0.501	7.95
100%	800	0.222	3.52	1300	0.361	5.72	1250	0.347	5.50	1900	0.528	8.37

DN		15	20
SW	mm	30 (G ¾A)	37 (G 1A)
d		21	26
R 1)		½	¾
L		65	82
L1 2)		130	160
L2		114	141
L3		130	160
H		38	44
H1		66	67
D (ISO 228/1)		G ¾ A	G 1 A
k		65	75
d2		14	14
n		4	4
Uzito wa valve	kg	0.49	0.66

Matengenezo:

1. The AVQML valve is maintenance-free, but regular checks are recommended for optimal performance.
2. If any issues arise, consult the user manual for troubleshooting steps or contact customer support.

DN			15	20
L*	AMV(E) 10	mm	101	111
	AMV(E) 13		105	115
	- Tính năng ống kính để tạo hiệu ứng sét thực sự		96	107
	QTL		110	110
	AMV(E) 130/140		95	105
L**	AMV(E) 10		159	169
	AMV(E) 13		162	173
	- Tính năng ống kính để tạo hiệu ứng sét thực sự		130	140
	QTL		136	147
	AMV(E) 130/140		128	138
H*	AMV(E) 10		195	202
	AMV(E) 13		209	216
	- Tính năng ống kính để tạo hiệu ứng sét thực sự		182	189
	QTL		216	223
	AMV(E) 130/140		171	178
H**	AMV(E) 10		191	197
	AMV(E) 13		194	201
	- Tính năng ống kính để tạo hiệu ứng sét thực sự		182	189
	QTL		201	208
	AMV(E) 130/140		169	176

Danfoss A / S

• Ufumbuzi wa Hali ya Hewa
• danfoss.com
• +45 7488 2222

In this information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the xtent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos, and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered, provided that such alterations can be made without changes to the form, fit function of the product. All trademarks in this material are the property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.

Maswali Yanayoulizwa Mara kwa Mara

Swali: Je, valve ya AVQML inafaa kwa mifumo ya shinikizo la juu?

A: The AVQML valve has a maximum pressure rating of PN25 and can handle inlet pressures up to 800kPa (8 bar), making it suitable for many high-pressure applications.

Swali: Ninawezaje kurekebisha kiwango cha mtiririko kwenye valve ya AVQML?

A: The flow rate can be adjusted by setting the valve to the corresponding values provided in the table based on the percentage of flow required.

Swali: Je, ninahitaji kufanya matengenezo ya mara kwa mara kwenye vali ya AVQML?

A: The AVQML valve is designed to be maintenance-free, but periodic checks are recommended to ensure smooth operation and detect any issues early.

Nyaraka / Rasilimali

Danfoss AVQML DN15 na Vali Huru za Kudhibiti za DN20 [pdf] Mwongozo wa Maelekezo 73690560.

Marejeleo

• Mwongozo wa Mtumiaji