AUTOMATE Control4 Pulse Pro Hub
OTOMATIA MPIGO WA PRO JUUVIEW
Ongeza hali yako ya utumiaji Kiotomatiki kwa kuunganisha bila mshono vivuli vya kiotomatiki na mifumo ya CONTROL4 Smart Home. Automate Pulse PRO Hub inatoa muunganisho wenye nguvu na udhibiti wa kivuli na mawasiliano ya njia mbili, kutoa masasisho ya wakati halisi kuhusu nafasi ya kivuli na viwango vya betri. Ikijumuisha Ethernet (CAT 5) na 2.4GHz muunganisho wa pasiwaya, Pulse PRO Hub huhakikisha muunganisho wa otomatiki wa nyumbani kupitia lango la RJ45 ambalo ni rahisi kufikia lililo nyuma ya kitovu. Kila kitovu kinaweza kutumia hadi vivuli 30, na kuifanya kuwa suluhisho linalofaa kwa usanidi wowote wa otomatiki wa nyumbani.
IMEKWISHAVIEW:
| Control4 Version Required | 2.9.0 kima cha chini |
| Msanidi | kiambatisho4 |
| Tarehe ya Kutolewa ya Awali | 5/28/2019 |
| Tarehe ya Mwisho Kurekebishwa | 1/24/2025 |
| Barua pepe ya Usaidizi | ustechsupport@rolleaseacmeda.com |
Kumbuka: For support of real time updates the annex4 Link driver is required. You can find the driver at: https://annex4.link/drivers/link
Ufungaji wa vifaa vikuu
- Install all shades/blinds/motors at desired locations
- Connect the Hub to the Automate Pulse app
- Connect all shades/blinds/motors to the Automate Pulse app
USAFIRISHAJI WA HIFADHI
- Place the “Automate Pulse PRO Hub” driver into the project.
- Navigate to the Connections section and select the Network tab.
- Ingiza anwani ya IP ya Hub ya Otomatiki ya Pulse PRO.
- Confirm that shades have been detected by looking at the Detected Drivers property.
- For each shade that the “Automate Pulse Hub” has added to the connections add an “Automate Pulse Shade” driver to the project.
- Bind the “Automate Pulse Shade” drivers to the “Automate Pulse Hub”.
- a) Once the connection has been bound the driver will automatically populate shade properties.
- Set the ‘Shade Movement Type’ to ‘Move’ or ‘Rotate’ to determine what the driver should control.
- a) ‘Move’ will control basic shade movement.
- b) ‘Rotate’ will control the motor rotation.
- Run the ‘Calibrate’ action on the shade, this will prepare the driver to calculate the travel times of the shades. By doing this the driver will accurately display ramp viwango vya matumizi bora ya mtumiaji.
- Onyesha upya Vivinjari.
KUMBUKA: Grayed out sections are part of the hub driver installation.
Dereva huyu ni Kidhibiti cha Kiolesura cha Rollease Acmeda Automate Pulse PRO Hub. Inaruhusu udhibiti wa IP juu ya vivuli vya Rollease kutoka CONTROL4.
DRIVE FOR THE MOTOR
VIPENGELE VINAVYOUNGWA:
- Drag and drop installation
- Easy calibration of shade travel time
- Control of motor rotation and shade movement
MALI:
MATENDO:
VIUNGANISHI:
FOR THE HUB
VIPENGELE VINAVYOUNGWA:
- Simple installation of the hub driver by connecting the network connection;
- Automatically calculates the travel time of the motors accurate to within 50ms;
MALI:
MATENDO:
MAHUSIANO:
COMMOMS MISTAKES:
- Kuingiza anwani ya IP isiyo sahihi katika mstari wa usanidi wa "Anwani ya IP".
- Ikiwa unashindwa kugundua vifaa angalia hii mara mbili!
CONTROL4 SYSTEM CONNECTION:
MASWALI YANAYOULIZWA MARA KWA MARA
Q. Hakuna Pulse PRO Hub iliyogunduliwa.
A. Hakikisha kuwa PRO yako ya Automate Pulse PRO imeunganishwa kwenye mtandao sahihi na upate Anwani ya IP inayopatikana na bado unawasiliana na mtandao kwa kutumia Programu ya Kubadilisha Kivuli Kiotomatiki.
Q. Vikomo vya kivuli havijawekwa vizuri.
A. Calibrate shade limits with your Rollease Acmeda remote before setting the appropriate open and close time within CONTROL4 SYSTEM.
Q. Kivuli hakisogei hata kidogo.
A. Make sure the selected Pulse PRO Hub is the correct Pulse PRO Hub for the shade to be controlled. Confirm the correct bindings are set in the CONTROL4 System connections tab between the Pulse PRO Hub and Shade drivers.
Q. Nina Pulse PRO Hubs nyingi, nifanye nini?
A. Pakia viendeshaji viwili vya Automate Pulse PRO Hub. Baada ya kuchagua "Rudisha Hubs" ziko kwenye kichupo cha vitendo vya dereva, utaona Hubs tofauti za Automate Pulse PRO - chagua unayotaka.
Q. I don’t see any shade bindings in the Pulse PRO Hub driver?
A. Chagua "Rudisha Vivuli" vilivyo kwenye kichupo cha vitendo vya kiendeshi.
Q. How do I scan for available Automate Pulse PRO Hubs?
A. Pindi Kitovu cha Otomatiki cha Pulse PRO kinapounganishwa vizuri kupitia kebo ya Ethaneti au mtandao usio na waya, nenda kwenye ukurasa wa Sifa za Kitovu Otomatiki ndani ya Mtunzi. Chagua "Rejesha Hubs" zilizo kwenye kichupo cha vitendo vya kiendeshi.
RASILIMALI ZA MSAADA:
Kwa usaidizi zaidi, wasiliana na muuzaji wako, tembelea yetu webtovuti kwenye www.rolleaseacmeda.com.
rolleaseacmeda.com
0 2025 Rollease Acmeda Group
Nyaraka / Rasilimali
 |
AUTOMATE Control4 Pulse Pro Hub [pdf] Mwongozo wa Mtumiaji Control4 Pulse Pro Hub, Pulse Pro Hub, Hub |