Sunco Lighting GD_BC2_SR-BK-3070K-6PK

Sunco 6 Pack 2W Solar Sidewalk Path Lights Instruction Manual

Model: GD_BC2_SR-BK-3070K-6PK

1. Utangulizi

This manual provides instructions for the installation, operation, and maintenance of your Sunco 6 Pack 2W Solar Sidewalk Path Lights. These solar-powered lights are designed for outdoor use, offering 100 lumens of brightness and selectable color temperatures (3000K, 5000K, 7000K) with automatic dusk-to-dawn functionality.

Sunco LED Solar Sidewalk Light banner showing key features: 100 Lumens, 50 LM/W, Auto On/Off, 2000 mAh Battery, and USA American Company logo.

Picha: Juuview of the Sunco LED Solar Sidewalk Light highlighting its features.

2. Bidhaa za Bidhaa

  • Uendeshaji kwa Umeme wa jua: Utilizes solar energy for charging, eliminating the need for external wiring or power sources.
  • 3-in-1 Color Temperature (3CCT): Offers selectable color temperatures of 3000K (Warm White), 5000K (Cool White), and 7000K (Daylight) to suit various preferences.
  • Utendaji Kazi Kuanzia Jioni Hadi Alfajiri: Equipped with a built-in photocell sensor that automatically turns the lights on at dusk and off at dawn.
  • Muundo Unaostahimili Hali ya Hewa: Constructed with durable plastic and rated IP65 for protection against dust and water ingress, suitable for outdoor environments.
  • Mwangaza: Provides 100 lumens of illumination per light unit.
  • Integrated CCT Switch: Allows for easy selection of desired color temperature.
  • Urefu unaoweza kurekebishwa: Includes extension poles for customizable height during installation.
Multiple Sunco solar path lights illuminating a garden path in three different color temperatures: warm white, cool white, and daylight.

Image: Sunco solar path lights demonstrating the three selectable color temperature options.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengele vyote vipo kwenye kifurushi chako:

  • 6 x Solar Path Light Heads
  • 6 x Upper Pole Segments
  • 6 x Lower Pole Segments
  • 6 x Vigingi vya ardhini
  • 1 x Mwongozo wa Maagizo

4. Taarifa Muhimu za Usalama

  • Bidhaa hii imeundwa kwa ajili ya matumizi ya nje tu. Do not install indoors.
  • Ensure the installation location does not create a tripping hazard.
  • Do not attempt to disassemble, repair, or modify the light unit. This may void the warranty and pose a safety risk.
  • Weka paneli ya jua safi ili kuhakikisha ufanisi bora wa kuchaji.
  • Avoid placing the lights near open flames or sources of extreme heat.
  • Dispose of the lithium-ion battery in accordance with local regulations.

5. Kuweka na Kuweka

5.1. Assemble the Light Unit

Connect the pole segments together, then attach them to the light head. You can use one or both pole segments to adjust the height of the light.

Diagram showing three steps for setting up the solar path light: 1. Connect plug & pole, 2. Select color temperature, 3. Place into ground.

Image: Visual guide for connecting the pole and light head.

5.2. Select Color Temperature (CCT)

Locate the CCT switch on the underside of the light head. Slide the switch to select your desired color temperature: 3000K (Warm White), 5000K (Cool White), or 7000K (Daylight).

Image showing a hand adjusting a small switch on the underside of the solar light head, with three examples of the light output at 3000K, 5000K, and 7000K.

Image: Demonstrating the selectable CCT switch and its effect on light color.

5.3. Optimal Placement for Solar Charging

For optimal performance, place the solar path lights in an area that receives direct sunlight for at least 6-8 hours daily. Avoid shaded areas caused by trees, buildings, or other obstructions. Also, ensure the lights are not placed directly under streetlights or other strong light sources, as this may interfere with the dusk-to-dawn sensor and prevent the lights from activating.

Diagram showing correct placement of a solar light in the ground and incorrect placement under a tree or street lamp, which would hinder charging or activation.

Image: Guide for proper light placement to ensure effective solar charging and operation.

5.4. Secure in Ground

Attach the ground stake to the bottom pole segment. Firmly push the assembled light into the soil. Ensure the light is stable and upright.

6. Maagizo ya Uendeshaji

6.1. Automatic Dusk-to-Dawn Functionality

Once installed and exposed to sunlight, the lights will automatically charge during the day. At dusk, the built-in photocell sensor will detect low light conditions and activate the lights. They will remain illuminated throughout the night and turn off automatically at dawn.

Split image showing a solar light in a garden during daytime, labeled 'Daytime Charging', and the same light illuminated at night, labeled 'Nighttime Brightness'.

Image: Illustration of the light's automatic charging during the day and illumination at night.

6.2. Kurekebisha Joto la Rangi

The color temperature can be changed at any time using the CCT switch located on the light head. Adjust the switch to cycle between 3000K, 5000K, and 7000K to achieve your desired lighting effect.

Three close-up images of a single solar path light, each showing a different color temperature: 3000K warm white, 5000K cool white, and 7000K daylight.

Picha: Karibu view of the solar light demonstrating the three distinct color temperature outputs.

7. Matengenezo

  • Kusafisha: Mara kwa mara futa paneli ya jua kwa laini, damp cloth to remove dust, dirt, and debris. A clean solar panel ensures maximum charging efficiency.
  • Ukaguzi: Periodically check the lights for any signs of damage or wear. Ensure the ground stakes are firmly in place.
  • Upinzani wa Hali ya Hewa: The lights are designed to be weatherproof (IP65 rated), but extreme weather conditions may affect performance. Ensure proper drainage around the base of the lights.
A Sunco solar path light in a garden during rainfall, with a 'Wet-Rated' label, demonstrating its weatherproof design.

Image: The solar path light shown enduring rain, highlighting its weatherproof construction.

8. Utatuzi wa shida

TatizoSababu inayowezekanaSuluhisho
Nuru haiwashi usiku.Insufficient solar charge; light sensor activated by other light sources.Ensure the solar panel receives 6-8 hours of direct sunlight daily. Relocate the light away from streetlights or other bright lights.
Light is dim or turns off too early.Inadequate solar charging; dirty solar panel; battery degradation.Clean the solar panel. Ensure optimal sun exposure. If the issue persists after prolonged charging, the battery may need replacement (contact support).
Mwanga flickers.Loose connection; low battery charge.Check all pole connections. Ensure the light receives sufficient solar charge.

9. Maelezo ya kiufundi

KipengeleMaelezo
Nambari ya MfanoGD_BC2_SR-BK-3070K-6PK
Mwangaza100 Lumens
Wattage2 Watts
Joto la Rangi3000K / 5000K / 7000K (Inaweza kuchaguliwa)
Chanzo cha NguvuSolar (DC)
Aina ya BetriIoni 1 ya Lithiamu (2000 mAh)
NyenzoPlastiki
Kiwango cha Upinzani wa MajiIP65 (isiyopitisha maji)
Vipimo vya Bidhaa14.57"L x 13.46"W x 5.6"H
Uzito wa Kipengee12.8 wakia
Angle ya Boriti110°
Ufanisi50 LM/W
UPC840360610972
Diagram showing the dimensions of the solar path light, including a height of 28.5 inches and a light head width of 4.8 inches, along with key specifications like 100 Lumens, 50 LM/W, 0.8 Lbs weight, and 2000 mAh Lithium-ion battery.

Image: Detailed dimensions and key technical specifications of the solar path light.

10. Udhamini na Usaidizi wa Wateja

Taa ya Sunco hutoa Udhamini wa Miaka 1 for this product, ensuring quality and reliability. For any questions, technical assistance, or warranty claims, please contact our USA-based support specialists.

Bidhaa Imeishaview Video

Video: Kumalizikaview of the Sunco Selectable Solar Sidewalk Light, demonstrating its features and functionality.

About Sunco Lighting

Video: Learn more about Sunco Lighting, their commitment to quality, and customer-focused approach.

Nyaraka Zinazohusiana - GD_BC2_SR-BK-3070K-6PK

Kablaview Mwongozo wa Ufungaji wa Kifurushi cha Kifurushi cha Ukuta cha Nusu Mduara: Wat Inayoweza Kuchaguliwatage & Mpangilio wa LED wa CCT
Mwongozo wa kina wa usakinishaji wa Kifurushi cha Ukuta cha Sunco Lighting Semi-Circle, kilicho na wat inayoweza kuchaguliwa.tage, CCT, na utendakazi wa chembechembe za jua jioni hadi alfajiri. Inajumuisha maonyo ya usalama, maagizo ya hatua kwa hatua ya kupachika, michoro ya nyaya, na usanidi wa swichi ya DIP.
Kablaview Mwongozo wa Usakinishaji wa Taa za Mafuriko za LED za Sunco: Maelekezo ya Hatua kwa Hatua
Mwongozo kamili wa usakinishaji wa Taa za Mafuriko za Sunco LED, unaohusu tahadhari za usalama, uwekaji, nyaya, mipangilio ya CCT, usakinishaji wa seli fotokopi, na utatuzi wa matatizo. Unajumuisha maelezo ya kina ya michoro na taarifa za nyaya.
Kablaview Maagizo ya Ufungaji wa Vikapu vya LED Center
Mwongozo wa kina wa usakinishaji wa Trofa za Kikapu za Kituo cha LED cha Sunco Lighting, unaofunika tahadhari za usalama, nyaya, na marekebisho ya uwanja kwa wat.tage na joto la rangi.
Kablaview Sunco Lighting SH-C5107-B Taa za Kudumu za Nje za LED - Mwongozo wa Mtumiaji na Maelezo.
Maelezo ya kina kuhusu Taa za Kudumu za Nje za Sunco Lighting za SH-C5107-B, ikijumuisha vipengele, data ya bidhaa, vipimo, usakinishaji na matumizi ya programu. IP65 imekadiriwa, Bluetooth na Wi-Fi inaoana.
Kablaview Mwangaza wa Machweo ya Sunco hadi Alfajiri ya Taa ya Ghalani ya LED - 55W, 5000K, Mpangilio wa Nje Uliokadiriwa wa IP65
Gundua Mwangaza wa Sunco 55W Jioni hadi Dawn LED Barn Mwanga. Ratiba hii iliyokadiriwa ya IP65 hutoa lumens 7150 kwa 5000K, inayoangazia photocell iliyojengewa ndani, ujenzi wa alumini wa kudumu na dhamana ya miaka 5. Inafaa kwa eneo, ghalani, na taa za ghala.
Kablaview Mwongozo wa Mtumiaji wa LED na Mbinu Bora za Kuwasha za Sunco hadi Alfajiri
Pata maelezo kuhusu jinsi ya kutumia balbu za LED za Sunco Lighting's Dusk to Dawn kwa mwangaza wa kiotomatiki wa nje. Mwongozo huu unashughulikia teknolojia ya photocell, vidokezo vya usakinishaji, na mbinu bora za utendakazi bora.