Mwongozo wa Mtumiaji wa Ugavi wa Nishati wa ITECH IT6721 wa DC

Mfano: IT6721

1. Utangulizi na Zaidiview

This manual provides essential information for the safe and efficient operation of the ITECH IT6721 Variable DC Power Supply. The IT6721 is a digital-control lab bench power supply offering adjustable voltage and current outputs, designed for a wide range of applications in electronics, research, and education.

ITECH IT6721 Variable DC Power Supply front view

Figure 1: ITECH IT6721 Variable DC Power Supply

Sifa Muhimu:

Udhibiti wa Dijiti: Pato Voltage: 0~60V, Output Current: 0~8A, Power: 0~180W. Resolution: 0.01V/0.001A.
CC/CV Automatic Conversion: Seamless switching between constant voltage and constant current modes.
High Reliability Protection: Equipped with Over Current Protection (OCP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP).
Upeo mpana wa Maombi: Suitable for various testing needs, providing flexible Volt/Amp combinations within rated power.
Kazi ya Kumbukumbu: Allows saving and recalling frequently used settings.

Maombi:

Aging test of power modules, display boards, DC contacts, and fuses.
Various consumer electronics testing.
Low-power battery charging tests.
Auxiliary power supply (12V/24V or 48V).
Electronic water pump/fuel pump and other low power product tests.
Suitable for university laboratories, testing, and certification authorities.

Diagram showing various applications of the power supply

Kielelezo 2: Zaidiview of typical applications for the ITECH IT6721

2. Taarifa za Usalama

Please read and understand all safety instructions before operating the device. Failure to comply with these instructions may result in electric shock, fire, or damage to the product.

Always connect the power supply to a grounded outlet.
Usifanye kazi kwenye mvua au damp masharti.
Ensure proper ventilation to prevent overheating. Do not block air vents.
Usifungue casing; there are no user-serviceable parts inside. Refer servicing to qualified personnel.
Thibitisha ujazo wa uingizajitage settings (110V/220V) match your local power supply before connecting.
Use only the specified power cord and accessories.
Disconnect power before making any connections or disconnections to the output terminals.

3. Yaliyomo kwenye Kifurushi

Baada ya kufungua, tafadhali thibitisha kuwa vitu vyote vilivyoorodheshwa hapa chini vipo na havijaharibiwa:

ITECH IT6721 Bench Power Supply x 1
Kamba ya Nguvu x 1
Ex-factory Test Report x 1

If any items are missing or damaged, please contact ITECH customer support immediately.

4. Kitambulisho cha Sehemu

Paneli ya mbele:

Front panel of ITECH IT6721 with labeled components

Kielelezo 3: Mpangilio wa Jopo la Mbele

CC/CV Indicator: Lights up to indicate Constant Current (CC) or Constant Voltage (CV) hali.
OCP/OVP Indicator: Lights up when Over Current Protection or Over Voltage Protection is active.
Memory Save Buttons (A, B, C, D): Used to save and recall settings.
Keyboard Lock Button: Locks the front panel controls to prevent accidental changes.
Output ON/OFF Button: Toggles the power output.
Voltage/Current Adjust Knob: Rotary encoder for adjusting voltage na maadili ya sasa.
Kitufe cha Kubadilisha Onyesha: Cycles through different display modes or parameters.
Air Flow Input: Vents for cooling air intake.
Washa / ZIMA Zima: Swichi kuu ya nguvu kwa kitengo.
Output Terminals (+, -, Ground): Connectors for positive, negative, and ground output.

Nyuma Panel:

Rear panel of ITECH IT6721 with labeled components

Kielelezo 4: Mpangilio wa Jopo la Nyuma

Power Switch (Voltage Selector): Used to select between 110V and 220V input voltage. Ensure this matches your local power supply before connecting.
Uingizaji wa Nguvu ya AC: Connector for the main AC power cord.
9-pin Connector: Kwa matumizi ya kiwanda tu.
Kipeperushi cha kupoeza: Provides active cooling for the internal components.

5. Kuweka

Kufungua: Carefully remove the power supply from its packaging and inspect for any signs of damage.
Uwekaji: Place the unit on a stable, level surface with adequate ventilation. Ensure that the front and rear air vents are not obstructed.
Voltage Uchaguzi: On the rear panel, verify that the power switch (voltage selector) is set to the correct voltage for your region (110V or 220V).
Muunganisho wa Nishati: Connect the provided power cord to the AC power input on the rear panel and then to a grounded wall outlet.
Kuwasha kwa Awali: Flip the main power ON/OFF switch on the front panel to the 'ON' position. The display should illuminate.

6. Maagizo ya Uendeshaji

This section details the basic operation of the ITECH IT6721 power supply.

Operesheni ya Msingi Imeishaview:

Video 1: Demonstration of ITECH IT6700 series DC power supply basic operation, including setting voltage and current, and toggling output.

Kuweka Voltage na ya sasa:

Ensure the output is OFF (Output ON/OFF button is not illuminated).
Tumia Voltage/Current Adjust Knob to set the desired voltage. Press the knob to switch between coarse and fine adjustment modes.
Bonyeza kwa Shift kifungo na kisha Voltage/Current Adjust Knob to switch to current setting mode. Adjust the current limit using the knob.
The display will show the set voltage na maadili ya sasa.

Diagram showing adjust step value settings for voltage na ya sasa

Figure 5: Adjust Step Value for Voltage na Sasa

Udhibiti wa Pato:

Baada ya kuweka vol inayotakiwatage and current, press the Pato IMEWASHA/ZIMA button to enable the output. The button will illuminate.
To disable the output, press the Pato IMEWASHA/ZIMA kifungo tena.

Kazi ya Kumbukumbu:

The power supply allows you to save and recall up to four sets of voltage na mipangilio ya sasa.

Inahifadhi Mipangilio: Weka ujazo unaotakatage and current. Press and hold one of the Memory Save buttons (A, B, C, or D) until the display indicates the setting is saved.
Recalling Settings: Bonyeza kwa ufupi kinacholingana Memory Save button (A, B, C, or D) kukumbuka mipangilio iliyohifadhiwa.

Kufuli la Kibodi:

To prevent accidental changes to settings during operation, you can lock the front panel controls.

Bonyeza kwa Kufuli ya Kibodi button to activate or deactivate the lock function. A lock icon may appear on the display when active.

Figure 6: Keyboard Lock Feature

Udhibiti wa Programu:

The ITECH IT6721 can be controlled via software for advanced applications and data logging.

Image showing the power supply connected to a laptop with control software

Figure 7: Power Supply with Free Software Interface

Refer to the separate software manual for detailed instructions on installation and usage.

7. Matengenezo

Utunzaji sahihi huhakikisha maisha marefu na uendeshaji wa kuaminika wa usambazaji wako wa nguvu.

Kusafisha: Tumia kitambaa laini na kavu kusafisha sehemu ya nje ya kifaa. Usitumie visafishaji vya abrasive au vimumunyisho.
Uingizaji hewa: Regularly check that the air vents are clear of dust and debris to ensure proper cooling.
Hifadhi: Ikiwa haitumiki kwa muda mrefu, hifadhi usambazaji wa umeme katika mazingira baridi na kavu, mbali na jua moja kwa moja na halijoto kali.
Urekebishaji: Periodic calibration by qualified personnel is recommended to maintain measurement accuracy.

8. Utatuzi wa shida

Sehemu hii hutoa suluhisho kwa masuala ya kawaida ambayo unaweza kukutana nayo.

Tatizo	Sababu inayowezekana	Suluhisho
Hakuna nguvu/Onyesho limezimwa	Power cord not connected; Main power switch off; Incorrect voltage selection; Blown fuse.	Check power cord connection; Ensure main power switch is ON; Verify voltage selector setting; Replace fuse if necessary (refer to safety guidelines).
Hakuna pato voltage/ya sasa	Output OFF; OCP/OVP active; Load issue.	Press Output ON/OFF button; Check OCP/OVP indicators and adjust settings; Verify load connection and resistance.
Shabiki haikimbii	Normal operation at low load; Overheating.	The fan operates based on internal temperature. It may not run at low loads. If unit is hot and fan is off, check for blocked vents.
Settings cannot be changed	Keyboard lock active.	Press the Keyboard Lock button to deactivate.

If the problem persists after attempting these solutions, please contact technical support.

9. Vipimo

Detailed technical specifications for the ITECH IT6721 Variable DC Power Supply.

Kigezo	Thamani
Mfano	IT6721-US
Pato Voltage	0-60V
Pato la Sasa	0-8A
Nguvu ya Pato	0-180W
Voltage Azimio	0.01V
Azimio la Sasa	0.001A
Voltage Usahihi	<0.05%+10mV
Usahihi wa Sasa	<0.3%+5mA
Vipimo vya Bidhaa (L x W x H)	Inchi 11.1 x 6.9 x 3.5 (282 x 175 x 88 mm)
Uzito wa Kipengee	Pauni 8
Mbinu ya Kupoeza	Hewa
Idadi ya Mashabiki	1
Kipengele cha Fomu	Benchtop

Dimensions of the ITECH IT6721 power supply

Mchoro 8: Vipimo vya Bidhaa

Multiple ITECH power supplies mounted in a standard 19-inch rack

Figure 9: Standard Size for 19" Rack Mount (multiple units shown)

10. Udhamini na Msaada

ITECH provides professional technical support for its products.

For technical assistance, product inquiries, or warranty claims, please contact our technical support team.
Barua pepe: fae@itech.sh

Please have your product model and serial number ready when contacting support.

	ITECH IT-N6900 Programmable DC Power Supply - Vipengele, Maombi, na Specifications Gundua mfululizo wa usambazaji wa umeme wa DC unaoweza kuratibiwa wa ITECH IT-N6900, unaojumuisha chaguzi za kutoa 60V/150V na 850W/1500W. Hati hii inaeleza vipengele vyake vya kina kama vile kipaumbele cha CC/CV, kupanga orodha, kumbukumbu ya data, ulinzi wa kina na chaguo za muunganisho. Inajumuisha maelezo ya kina ya kiufundi na maeneo ya maombi kwa ajili ya matumizi ya viwanda na R&D.
	Mwongozo wa Mtumiaji wa iTech Fusion Smartwatch na Mwongozo wa Kuweka Mwongozo wa kina wa saa mahiri ya iTech Fusion, usanidi wa kufunika, vipengele, ufuatiliaji wa shughuli, ufuatiliaji wa usingizi, ufuatiliaji wa mapigo ya moyo, njia za michezo na maagizo ya utunzaji. Jifunze jinsi ya kuunganisha, kusawazisha na kutumia vipengele vyote ukitumia programu ya iTech Wearables.
	Mwongozo wa Mtumiaji wa Ugavi wa Nishati wa ITECH IT6720 Mwongozo wa kina wa mtumiaji wa Ugavi wa Nguvu za Udhibiti wa Dijiti wa ITECH IT6720, unaoeleza kwa kina vipengele vyake, utendakazi, tahadhari za usalama, vipimo, na utatuzi wa matatizo.
	Mwongozo wa Mtumiaji wa Mfululizo wa IT2702/IT2704 - Mfumo wa Nishati wa Msimu wa ITECH wa Multi-Channel Mwongozo wa mtumiaji wa Mfumo wa Nishati wa Msimu wa ITECH IT2702/IT2704. Mwongozo huu unatoa maelezo ya kina juu ya vipengele, vipimo, tahadhari za usalama na usakinishaji.
	iTECH Sport Fitness Tracker Mwongozo wa Mtumiaji Mwongozo wa kina wa mtumiaji wa ITECH Sport Fitness Tracker, usanidi unaojumuisha, vipengele, uvaaji na utunzaji, na maelezo ya udhibiti.
	Mwongozo na Mwongozo wa Mtumiaji wa iTech Gladiator 2 Smartwatch Mwongozo wa kina wa mtumiaji wa iTech Gladiator 2 Smartwatch, kuweka mipangilio, vipengele, urambazaji, utunzaji na maelezo ya udhibiti. Pata maelezo kuhusu jinsi ya kutumia saa yako mahiri kufuatilia siha, arifa na mengine mengi.

ITECH IT6721