Mwongozo wa Mtumiaji wa Balbu ya Halojeni ya Philips 7388 20 Watt 6 Volt

Utangulizi

This manual provides essential information for the safe and effective use of your Philips 7388 20 Watt 6 Volt Halogen Bulb. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of the product.

The Philips 7388 halogen bulb is designed to produce a comfortable, warm white light, maintaining its luminous efficiency throughout its operational life. It features a G4 socket and is suitable for various lighting applications.

Taarifa za Usalama

Daima zingatia tahadhari zifuatazo za usalama:

Zima umeme: Always disconnect power to the fixture before installing, removing, or cleaning the bulb.
Kushughulikia kwa Uangalifu: Halogen bulbs can become very hot. Allow the bulb to cool completely before handling.
Epuka Mawasiliano: Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves if necessary.
Vol. Sahihitage: Hakikisha kiwango cha mchezotage inalingana na vol ya balbutage (6 Volts). Using an incorrect voltage can damage the bulb or the fixture.
Mpangilio Sahihi: Use only in fixtures designed for halogen bulbs and with appropriate wattagmakadirio ya e.
Utupaji: Tupa balbu zilizotumiwa kulingana na kanuni za mitaa.

Kuweka na Kuweka

Fuata hatua hizi kwa ufungaji sahihi:

Hatua ya 1: Kukata Muunganisho wa Nguvu
Ensure the power supply to the lighting fixture is turned off at the circuit breaker or by unplugging the fixture.
Step 2: Remove Old Bulb (if applicable)
If replacing an existing bulb, allow it to cool completely. Gently pull the old G4 bulb straight out from its socket.
Step 3: Prepare New Bulb
Carefully remove the new Philips 7388 bulb from its packaging. Avoid touching the glass envelope with bare hands. If you accidentally touch it, wipe it clean with a lint-free cloth moistened with rubbing alcohol.
Step 4: Insert New Bulb
Align the two pins of the G4 bulb with the holes in the socket. Gently push the bulb straight into the socket until it is fully seated. Do not force it.
Hatua ya 5: Rejesha Nguvu
Baada ya balbu kusakinishwa kwa usalama, rudisha nguvu kwenye kifaa.
Hatua ya 6: Mtihani
Washa swichi ya mwanga ili kuthibitisha utendakazi sahihi.

Philips 7388 Halogen Bulb with G4 base — Image 1: Philips 7388 Halogen Bulb. This image shows the clear glass bulb with its two-pin G4 base, ready for installation.

Maagizo ya Uendeshaji

The Philips 7388 halogen bulb operates immediately upon receiving power. No special operating procedures are required beyond turning the fixture's power switch on or off.

Kupunguza: If used with a compatible dimmer switch, the brightness of the bulb can be adjusted. Ensure the dimmer is rated for halogen or incandescent loads and matches the bulb's voltage na wattage.
Pato la Joto: Halogen bulbs produce heat. Ensure adequate ventilation around the fixture to prevent overheating.

Matengenezo

Minimal maintenance is required for the Philips 7388 halogen bulb.

Kusafisha: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
Uingizwaji: When the bulb reaches the end of its life, replace it following the "Setup and Installation" steps. Always use a bulb with the same specifications (20W, 6V, G4 base) to ensure compatibility and safety.

Kutatua matatizo

If your Philips 7388 bulb is not functioning as expected, consider the following:

Balbu isiyo na Mwanga:
- Angalia ikiwa usambazaji wa umeme kwenye kifaa umewashwa.
- Ensure the bulb is correctly seated in the G4 socket.
- Inspect the bulb for any visible damage or a broken filament. If damaged, replace the bulb.
- Jaribu kifaa kwa balbu inayojulikana ya kufanya kazi ili kudhibiti suala la kurekebisha.
Kumeta kwa Balbu:
- Hakikisha balbu imeingizwa kikamilifu kwenye soketi.
- Angalia miunganisho iliyolegea kwenye kifaa au nyaya.
- If using a dimmer, ensure it is compatible with halogen bulbs and not overloaded.
Short Bulb Life:
- Thibitisha juzuu sahihitage (6V) is being supplied to the bulb. Overvoltage inaweza kupunguza kwa kiasi kikubwa maisha ya balbu.
- Hakikisha balbu haiguswi kwa mikono mitupu wakati wa kusakinisha, kwani mafuta ya ngozi yanaweza kusababisha kushindwa kufanya kazi mapema.
- Check for excessive vibration or heat in the fixture, which can shorten bulb life.

Vipimo

Key technical specifications for the Philips 7388 Halogen Bulb:

Kipengele	Vipimo
Chapa	Taa ya Philips
Nambari ya Mfano	7388
Aina ya Mwanga	Halojeni
Wattage	20 Watts
Voltage	6 Volts
Mwangaza wa Flux	460 - 475 lm (typical)
Socket/Base	G4
Joto la Rangi	3200 - 3350 Kelvin (Warm White)
Ukubwa wa Umbo la Balbu	JC
Kielezo cha Utoaji wa Rangi (CRI)	100
Nyenzo	Shaba (pini)
Vipimo vya Bidhaa	0.35"W x 1.21"H (approx.)
Matumizi ya Ndani/Nje	Ndani

Technical drawing of a G4 halogen bulb with dimensions — Image 2: Technical Diagram of G4 Halogen Bulb. This diagram illustrates the dimensions and structure of a typical G4 halogen bulb, similar to the Philips 7388.

Udhamini na Msaada

For warranty information or technical support regarding your Philips 7388 Halogen Bulb, please refer to the official Philips Lighting webtovuti au wasiliana na huduma kwa wateja wao moja kwa moja. Weka risiti yako ya ununuzi kama uthibitisho wa ununuzi.

You can visit the Philips Store for more information: Duka la Philips kwenye Amazon

	Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10: Karatasi ya data ya taa ya LED yenye nguvu nyingi Karatasi ya data ya kiufundi ya Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10, taa ya LED yenye ufanisi mkubwa yenye vipengele vya hali ya juu, vipimo, na data ya matumizi. Inajumuisha maelezo ya utendaji, kiufundi, na umeme.
	Philips TubePoint: Safu ya Luminaire ya Utendaji wa Juu kwa Vichuguu vya Trafiki Gundua safu ya taa ya Philips TubePoint, iliyoundwa kwa ufanisi, gharama nafuu, na ufumbuzi wa kuaminika wa taa katika vichuguu vya trafiki. Kipeperushi cha familia ya bidhaa hii kinatoa maelezo kuhusu vipengele, manufaa, vipimo vya kiufundi na tofauti za miundo kwa ajili ya uangazaji bora zaidi wa handaki.
	Mwongozo wa Ubora wa Taa za Philips Mwongozo huu wa Ubora unaelezea Mfumo wa Ubora wa Philips Lighting, ukielezea michakato yake, viwango, na kujitolea kwake kwa ubora. Unatumika kama nyongeza kwa Mfumo wa Biashara wa Philips Lighting, kuhakikisha bidhaa na huduma zinakidhi mahitaji ya ISO 9001 na matarajio ya wateja.
	Taa za LED za Philips CoreLine Zilizowekwa Ukutani Gundua taa ya LED iliyopachikwa ukutani ya Philips CoreLine, suluhisho bunifu, rahisi kutumia, na la ubora wa juu la taa kwa matumizi mbalimbali kama vile korido, ngazi, na milango ya umma. Brosha hii inaelezea vipengele vyake, faida, vipimo vya kiufundi, na taarifa za bidhaa.
	Philips OccuSwitch LRM1070/00 PIR Anwesenheitssensor Datenblatt Datenblatt für den intelligenen Philips OccuSwitch LRM1070/00 Anwesenheitssensor. Bietet PIR-Teknolojia, tageslichtabhängige Schaltung, integriertes Relais und Deckeneinbau. Enthält technische Spezifikationen na Abmessungen.
	Kigunduzi cha Mwendo cha Philips OccuSwitch LRM1070/00 na Swichi ya Mwanga Gundua Philips OccuSwitch LRM1070/00, kigunduzi cha mwendo chenye akili chenye swichi iliyojumuishwa iliyoundwa kuokoa nishati kwa kuzima taa kiotomatiki katika vyumba visivyo na watu. Inafaa kwa nafasi zenye ukubwa wa hadi mita za mraba 25, hushughulikia mizigo hadi mita za mraba 6 na ina usakinishaji rahisi na kiunganishi kinachoweza kutolewa.

Taa za Philips 7388