Valvu ya Kunyunyizia Kiotomatiki ya Mzunguko wa 57623 3/4" FPT 100 yenye Mfululizo wa Maelekezo ya Kudhibiti Mtiririko ya Mzunguko wa 57623 yenye Mfululizo wa 3/4 wa FPT 100 yenye Mwongozo wa Maelekezo

Utangulizi

The Orbit 57623 3/4" FPT 100 Series Anti-Siphon Automatic Sprinkler Valve with Flow Control is designed to protect your irrigation system and culinary water supply from contamination due to backflow. This valve features an atmospheric vacuum breaker and is compatible with most 24 VAC irrigation controllers. Its durable plastic construction ensures reliable performance for outdoor irrigation applications with cold water only.

Orbit 57623 Anti-Siphon Automatic Sprinkler Valve

Figure 1: Orbit 57623 3/4" FPT 100 Series Anti-Siphon Automatic Sprinkler Valve.

Sifa Muhimu:

Backflow Prevention: Integrated atmospheric vacuum breaker prevents water contamination.
Udhibiti wa Mtiririko: Allows adjustment of water flow as needed.
Ufungaji Rahisi: Designed for above-ground installation on risers.
Utangamano: Works with major brands of 24 VAC irrigation controllers.
Internal Filter: Scrubber filter helps keep the system clog-free.
Uendeshaji wa Mwongozo: Features a manual on/off option and bleed screw for testing and flushing.

Kuweka na Kuweka

Proper installation is crucial for the optimal performance and safety of your irrigation system. This valve is designed for outdoor irrigation use with cold water only and must be installed above ground.

Mahitaji ya Ufungaji:

Install the anti-siphon valve at least 6 inches (15 cm) above the highest sprinkler head in the controlled zone.
Ensure the valve is installed on risers for easy access and maintenance.
Use appropriate threaded pipe adapters, PTFE thread seal tape, PVC primer, and PVC cement for secure connections.

Ufungaji wa Hatua kwa Hatua:

Zima Ugavi wa Maji: Before beginning any work, turn off the main water supply to your irrigation system.
Prepare Pipe Adapters: Wrap a thin layer of PTFE thread seal tape around the threads of your pipe adapters.
Attach Adapters to Valve: Screw the pipe adapters into the valve's inlet and outlet. Tighten them with pliers or channel locks, but be careful not to overtighten to prevent damage to the plastic.
Ensure Correct Flow Direction: Verify that the "FLOW" arrow on the valve body points in the direction of water flow.
Apply Primer and Glue: Apply PVC primer to the insides of the fittings and the outsides of the pipes. Once the primer dries, spread an even layer of PVC cement over the primed areas.
Unganisha mabomba: Insert the pipes into the fittings, ensuring the valve is level. Allow the glue to dry for at least 30 minutes before turning the main water supply back on.
Wire Solenoid: Connect the white wire from the solenoid to the common wire of your sprinkler timer (usually also white). Connect the other solenoid wire to a power wire (usually colored) from your timer. Use waterproof wire nuts to protect connections.

Video 1: Installation of InLine Valves CP and CPF. This video demonstrates the general process of installing inline sprinkler valves, including pipe preparation and wiring, which is applicable to the Orbit 57623 valve.

Maagizo ya Uendeshaji

The Orbit 57623 valve offers both automatic and manual control options.

Uendeshaji Otomatiki:

Once properly wired to a 24 VAC irrigation controller, the valve will open and close automatically according to the schedule set on your controller. Ensure your controller is programmed correctly for desired watering times and zones.

Uendeshaji wa Mwongozo:

Manual On/Off Lever: The valve includes a manual on/off lever (often a small black tab or knob near the solenoid). Turning this lever will manually open or close the valve, overriding the controller.
Bleed Screw: A bleed screw is provided for flushing the system or releasing air. To manually open the valve and flush, slowly turn the bleed screw counter-clockwise until water flows. To close, turn clockwise until snug.

Orbit 57623 Sprinkler Valve with Flow Control and Solenoid labeled

Kielelezo 2: Karibu view of the Orbit 57623 valve showing the flow control, 24 VAC solenoid, and manual on/off lever.

Marekebisho ya Udhibiti wa Mtiririko:

The integrated flow control allows you to adjust the amount of water flowing through the valve. Turn the flow control knob clockwise to decrease flow and counter-clockwise to increase flow. Adjust as needed for specific zone requirements.

Matengenezo

Regular maintenance helps ensure the longevity and efficient operation of your Orbit anti-siphon valve.

Internal Scrubber Filter:

The valve is equipped with an internal scrubber filter to prevent clogs. Periodically inspect and clean this filter if you notice reduced flow or erratic operation. Refer to the troubleshooting section for steps on accessing internal components.

Orbit 57623 Sprinkler Valve with Internal Filter labeled

Figure 3: The internal scrubber filter helps maintain clog-free operation.

Diaphragm and Seal Replacement:

Over time, the diaphragm and seals may wear out, leading to leaks. Repair kits (such as Orbit 57078) are available to replace these components. Follow the instructions provided with the repair kit for proper replacement.

Video 2: Bidhaa Imeishaview Video. Video hii inatoa maelezo ya jumlaview of the valve's components and may assist in understanding parts for maintenance.

Kutatua matatizo

This section addresses common issues you might encounter with your Orbit anti-siphon valve.

Masuala ya Kawaida na Suluhisho:

Valve Not Opening: Check wiring connections to the controller. Ensure the controller is sending a 24 VAC signal. Manually open the valve using the lever or bleed screw to confirm water pressure.
Valve Not Closing / Constant Leak: Inspect the diaphragm for debris or damage. Ensure the lid screws are tightened evenly. Check the solenoid for proper seating and function.
Mtiririko Uliopunguzwa: Clean the internal scrubber filter. Check for obstructions in the pipes or sprinkler heads. Ensure the flow control knob is fully open.
Leakage from Anti-Siphon Lid: Check the seal within the anti-siphon lid for proper placement and damage. Ensure sufficient back pressure from downstream components.
Leakage from Solenoid or Rotation Adapter: Inspect the O-ring on the solenoid for debris or damage. Re-tighten the solenoid.
Leakage from Flow Control Stem: This typically indicates a worn lid subassembly, which may require replacement.
Leakage from Inlet/Outlet Threads: Reapply PTFE pipe tape to the threads. Do not use pipe dope as it may be incompatible with valve materials.

Video 3: Anti-siphon Valve Troubleshooting. This official Orbit video provides visual guidance on diagnosing and resolving common issues with anti-siphon valves, including leaks from various components.

Vipimo

Kipengele	Maelezo
Nambari ya Mfano	57623
Aina ya Muunganisho	3/4" FPT (Uzi wa Bomba la Kike)
Mfululizo	100 mfululizo
Aina ya Valve	Anti-Siphon Automatic Sprinkler Valve
Kipengele cha Kudhibiti	Udhibiti wa Mtiririko
Solenoid Voltage	24 VAC
Nyenzo	Plastiki
Vipimo vya Bidhaa	Inchi 6.1 x 6.1 x 3.1
Uzito	Pauni 1
Idadi ya Bandari	2
Aina ya Muunganisho wa Ingizo	Kloridi iliyosafishwa ya kloridi
Aina ya Muunganisho wa Outlet	FNPT
Ukubwa wa Muunganisho wa Outlet	Inchi 0.75
Uainishaji Met	Flow Control Adjustment from 0 to 8 gph

Ni nini kwenye Sanduku

1 x Orbit 57623 3/4" FPT 100 Series Anti-Siphon Automatic Sprinkler Valve with Flow Control

Udhamini na Msaada

For warranty information, technical support, or to purchase replacement parts, please visit the official Orbit website or contact Orbit customer service. You can also find additional resources and products at the Orbit Store on Amazon.

	Mwongozo wa Ufungaji na Uendeshaji wa Vali ya Kudhibiti ya Kupambana na Sifoni Kiotomatiki ya Mzunguko Mwongozo kamili wa kusakinisha na kuendesha Vali ya Kudhibiti ya Orbit Automatic Anti-Siphon, ikiwa ni pamoja na vidokezo vya utatuzi wa matatizo na taarifa za udhamini.
	Mwongozo wa Ufungaji na Uendeshaji wa Vali ya Kudhibiti ya Kupambana na Sifoni ya WaterMaster Kiotomatiki Mwongozo kamili wa kusakinisha, kuendesha, na kutatua matatizo ya Valvu ya Kudhibiti ya Orbit WaterMaster Automatic Anti-Siphon (modeli 57221-57321). Inajumuisha vipengele, vipuri, na taarifa za udhamini.
	Mwongozo wa Usakinishaji na Utatuzi wa Matatizo ya Kibadilishaji Kiotomatiki cha Orbit (Mifumo 57029, 57030) Comprehensive guide for installing and troubleshooting the Orbit Automatic Converter (Models 57029, 57030) for sprinkler systems. Learn how to convert manual valves to automatic, wire the converter, and resolve common issues.
	Kifaa cha Kukunja cha Orbit WaterMaster chenye Valvu 3 Kilichokusanywa Tayari kwa Waya Rahisi - Usakinishaji na Mwongozo wa Mtumiaji Mwongozo kamili wa mtumiaji na mwongozo wa usakinishaji wa Orbit WaterMaster 3-Valve Preassembled Manifold yenye Waya Rahisi. Jifunze kuhusu uwekaji wa vali, usakinishaji, nyaya, majaribio, na utatuzi wa matatizo kwa mfumo wako wa kunyunyizia.
	Mwongozo wa Mmiliki wa Mfumo wa Kumwagilia Kiotomatiki wa Orbit 27752-24 Mwongozo huu unatoa maelekezo ya Mfumo wa Kumwagilia Kiotomatiki wa Orbit 27752-24, unaohusu usakinishaji, programu, umwagiliaji kwa mikono, na utatuzi wa matatizo.
	Mwongozo wa Mtumiaji wa Kipima saa cha Wi-Fi cha Obiti B-hyve Mwongozo wa kina wa mtumiaji wa Kipima Muda cha Kinyunyizio cha Wi-Fi cha Orbit B-hyve, usakinishaji wa kufunika, usanidi wa programu, upangaji programu, utendakazi wa mikono na utatuzi wa matatizo. Jifunze jinsi ya kuhifadhi maji na kudhibiti umwagiliaji wako kwa ufanisi.

Mzunguko 57623