FIFIN AmpBruksanvisning för liGame AM8PROT-spelmikrofonkit

1. Introduktion

FIFINE AmpliGame AM8PROT is a versatile dynamic microphone kit designed for gaming, streaming, podcasting, and other audio recording applications. It offers dual USB and XLR connectivity, vibrant RGB lighting, and intuitive controls for an enhanced user experience. This manual provides detailed instructions for setting up, operating, and maintaining your microphone kit.

Figur 1: FIFINE AmpliGame AM8PROT Gaming Microphone Kit with Boom Arm.

2. Paketets innehåll

Se till att alla artiklar som anges nedan finns i ditt paket:

• Dynamic Microphone (AM8PROT)
• RGB Boom Arm and Screw Adapter
• C-Clamp för skrivbordsmontering
• 8.2ft USB-C to USB-A/C Cable
• Användarmanual

Figur 2: Alla komponenter som ingår i FIFINE AmpliGame AM8PROT kit.

3. Inställning

3.1 Fysisk montering

1. Fäst C-Clamp to the edge of your desk. Ensure it is securely tightened to prevent movement.
2. Insert the RGB Boom Arm into the C-Clamp. Adjust the arm's position and tension as needed for optimal placement.
3. Screw the Dynamic Microphone onto the boom arm's adapter. Ensure it is firmly attached.
4. Place the foam windscreen over the microphone capsule to reduce plosives and breath noise.

Figure 3: The extended reach boom arm stand provides flexibility and saves desk space. It can extend up to 30 inches.

3.2 USB-anslutning (Plug-and-Play)

For quick and easy setup with your computer or gaming console:

• Connect the USB-C end of the provided 8.2ft cable to the USB-C port on the microphone.
• Connect the USB-A or USB-C end of the cable to an available port on your PC (Windows/MacOS), PS4, or PS5.
• The device should be automatically recognized by your system. Select "FIFINE AM8PROT" as your input/output device in your system's sound settings or streaming software.

Figure 4: The microphone offers dual USB and XLR connectivity for versatile use with various devices.

3.3 XLR Connection (Advanced Setup)

For professional audio setups with an audio interface or mixer:

• Connect an XLR cable (not included) from the XLR port on the microphone to an XLR input on your audio interface or mixer.
• Ensure your audio interface/mixer is properly configured and connected to your computer.
• The AM8PROT is a dynamic microphone and does not require 48V phantom power.

4. Bruksanvisning

4.1 Mikrofonkontroller

The AM8PROT features a multifunctional dial and a tap-to-mute button for easy audio management:

• Multifunctional Dial: This 3-in-1 knob controls microphone gain, headphone volume, and the mix balance between your vocal input and PC audio. Tap the dial to cycle through these settings, then rotate to adjust the level.
• Tryck-för-att-ljuda: A visible LED panel indicates the mute status. Tap the mute area on the microphone to instantly mute or unmute your audio. This prevents unwanted sounds during live broadcasts or recordings.
• Hörlursuttag: Connect your headphones to the 3.5mm jack on the microphone for real-time monitoring of your voice and PC audio without latency.

Figure 5: The multifunctional mic panel provides essential controls at your fingertips, including gain, headphone volume, mix control, and tap-to-mute.

4.2 RGB-ljusstyrning

The AM8PROT features vibrant RGB lighting on both the microphone and the boom arm:

• Microphone RGB: Use the dedicated RGB button on the microphone to cycle through 240+ RGB combinations, including static colors, flowing modes, and beat-reactive modes.
• Boom Arm RGB: The boom arm also features integrated RGB lighting. Use its dedicated control button to select various lighting effects and colors to match your setup or mood.

Figure 6: Experience immersive lighting with over 240 RGB combinations on both the microphone and boom arm.

5. Underhåll

• Keep the microphone and boom arm clean by wiping them with a soft, dry cloth.
• Undvik att utsätta enheten för extrema temperaturer, luftfuktighet eller direkt solljus.
• Do not use harsh chemicals or abrasive cleaners on any part of the kit.
• Se till att kablarna inte är böjda eller spända för att förhindra skador.

6. Felsökning

• Ingen ljudutgång:
  • Check all cable connections (USB or XLR) to ensure they are secure.
  • Verify that the microphone is selected as the default input device in your computer's sound settings or streaming software.
  • Ensure the microphone is not muted (check the LED indicator).
  • Adjust the microphone gain using the multifunctional dial.
• Dålig ljudkvalitet / Bakgrundsljud:
  • Se till att skumvindskyddet är korrekt monterat.
  • Position the microphone closer to your mouth (within 6-12 inches) and speak directly into the front of the capsule.
  • Reduce background noise in your environment. The cardioid pattern helps, but a quiet space is ideal.
  • Adjust the gain level to avoid clipping (distortion) or being too quiet.
• RGB-ljus fungerar inte:
  • Ensure the USB cable is securely connected, as it powers the RGB lighting.
  • Press the RGB control buttons on the microphone and boom arm to cycle through modes or turn them on.

7. Specifikationer

8. Garanti och support

For warranty information or technical support, please refer to the official FIFINE website or contact their customer service directly. The product includes a user's manual with additional support details.

Manufacturer: FIFINE