BRITA 1043450

BRITA P1000 3-Way Integrated Water Filtration System

Brand: BRITA | Model: 1043450

Introduktion

The BRITA P1000 3-Way Integrated Water Filtration System offers a convenient and sustainable solution for accessing filtered, cold, and hot water directly from a single tap. This system features high-quality BRITA filtration, capable of processing up to 1,200 liters, effectively reducing chlorine, limescale, and other impurities to enhance water taste and protect your appliances. Its premium stainless steel design provides both functionality and an elegant aesthetic for any modern kitchen.

BRITA P1000 3-Way Integrated Water Filtration System with tap and P1000 filter

Image: The BRITA P1000 3-Way Integrated Water Filtration System, showcasing the sleek stainless steel tap and the compact P1000 filter unit.

Säkerhetsinformation

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.

  • Stäng alltid av huvudvattenförsörjningen innan du påbörjar någon installation eller underhåll.
  • Ensure all connections are tight to prevent leaks. Check for leaks periodically after installation.
  • This system is designed for use with high-pressure boilers (2-8.6 bar). Do not use with low-pressure systems.
  • Använd inte med vatten som är mikrobiologiskt osäkert eller av okänd kvalitet utan adekvat desinfektion före eller efter systemet.
  • Keep the filter unit away from direct heat sources and freezing temperatures.
  • Only use genuine BRITA replacement filters to ensure optimal performance and safety.

Paketets innehåll

Kontrollera att alla komponenter finns innan installationen påbörjas:

  • BRITA 3-Way Tap (Square Style, Stainless Steel)
  • BRITA P1000 Filter Cartridge
  • Filter Head with Smart Filter Change Indicator (LED)
  • Mounting Accessories (hoses, connectors, seals, etc.)
Installation kit for BRITA 3-Way Integrated Water Filtration System

Image: A selection of tools and components typically included or required for the installation of the BRITA 3-Way Integrated Water Filtration System.

Installation och installation

The BRITA P1000 3-Way Integrated Water Filtration System is designed for easy installation under the sink, fitting most kitchens without the need for countertop drilling or electrical connection. Follow these steps for a successful setup:

  1. Förbered installationsområdet: Ensure you have sufficient space under your sink. The system requires a mounting hole of ø 35 mm and a minimum distance of 60 mm to the rear wall.
  2. Stäng av vattentillförseln: Lokalisera och stäng av huvudvattenförsörjningen till din köksvask.
  3. Montera kranen: Insert the 3-way tap into the designated hole on your countertop. Secure it from underneath using the provided mounting accessories.
  4. Anslut vattenslangar: Connect the hot and cold water supply lines to the corresponding inlets on the tap. Connect the filtered water line from the tap to the filter head.
  5. Install the Filter Head: Secure the filter head to the cabinet wall under the sink. Ensure it is easily accessible for filter changes.
  6. Insert the P1000 Filter: Insert the BRITA P1000 filter cartridge into the filter head.
  7. Turn On Water Supply & Flush: Slowly turn the main water supply back on. Open the filtered water tap and let the water run for at least 3 minutes to flush the system and remove any air or carbon fines. Check all connections for leaks.

För en visuell guide, se installationsvideon nedan:

Video: Detailed installation guide for the BRITA My Pure water filter tap system, demonstrating step-by-step setup.

Visual aids for installation:

Under-sink installation of BRITA P1000 filter

Image: An illustration showing the BRITA P1000 filter unit installed neatly under a kitchen sink, connected to the tap and water supply lines.

Diagram of under-sink filter connection

Image: A diagram illustrating the connection points of the BRITA filter head and cartridge to the water supply and the 3-way tap under the sink.

BRITA 3-Way Tap dimensions diagram

Image: A technical drawing showing the dimensions of the BRITA 3-Way Tap, including height, width, base ring diameter, and mounting hole size, crucial for planning installation.

Bruksanvisning

Your BRITA 3-Way Integrated Water Filtration System provides three types of water: filtered, cold, and hot. The tap features separate levers or controls for each function.

  • Filtrerat vatten: Use the dedicated lever (often marked or with a blue indicator) to dispense filtered water.
  • Cold & Hot Water: Use the standard mixer lever to dispense unfiltered cold or hot water, just like a conventional kitchen tap.
  • Smart Filter Change Indicator: The filter head includes an LED indicator that signals when it's time to replace the filter cartridge. Refer to the maintenance section for details on interpreting the indicator.
BRITA 3-Way Tap dispensing filtered and unfiltered water

Image: The BRITA 3-Way Tap demonstrating the simultaneous dispensing of filtered water from one spout and unfiltered cold/hot water from another, highlighting its versatility.

Close-up of BRITA filter change LED indicator

Bild: En närbild view of the BRITA tap's smart filter change indicator, showing the LED light that signals filter status.

Underhåll

Regular maintenance ensures optimal performance and longevity of your BRITA P1000 system.

Byte av filterpatron

The BRITA P1000 filter cartridge should be replaced periodically, typically every 6-12 months, or when the smart filter change indicator signals. The indicator light will change color (e.g., green to yellow to red) to prompt replacement.

  1. Turn off the water supply to the filter unit.
  2. Vrid den gamla filterpatronen moturs för att ta bort den från filterhuvudet.
  3. Insert the new BRITA P1000 filter cartridge into the filter head and twist clockwise until it clicks into place.
  4. Turn the water supply back on and flush the new filter for 3 minutes.
  5. Reset the smart filter change indicator according to its specific instructions (usually by pressing and holding a button).

Rengöring

Clean the exterior of the tap and filter unit regularly with a soft, damp trasa och milt rengöringsmedel. Undvik slipande rengöringsmedel eller lösningsmedel som kan skada ytan.

Felsökning

If you encounter any issues with your BRITA P1000 system, refer to the table below for common problems and solutions:

ProblemMöjlig orsakLösning
Low water flow from filtered tapTilltäppt filterpatronByt ut filterpatronen.
Vattenläckor från anslutningarLösa anslutningar eller skadade tätningarTurn off water supply, check and tighten all connections. Replace seals if damaged.
Obehaglig smak/lukt i filtrerat vattenExpired filter cartridge or improper flushingReplace filter cartridge and flush thoroughly. Ensure proper installation.
No water from filtered tapWater supply off or filter incorrectly installedCheck main water supply and filter unit connections. Reinstall filter if necessary.

Specifikationer

SärdragDetalj
TillverkareBRITA
Modellnummer1043450
Produktens vikt5.74 kg
Produktmått (L x B x H)22.7 x 18.1 x 40 cm
FärgRostfritt stål
StilFyrkant
StrömkällaManuell
InstallationsmetodDIY (gör det själv)
Antal hål som krävs1
HandtagspositionCentrum
Antal handtag2
HandtagsmaterialRostfritt stål
MonteringstypDäckmontering
SpecialfunktionerIntegrerat vattenfilter
Batterier krävsInga
Kapacitet1.2 Liters (Filter)
Rening MetodKolblock
UrsprungslandTyskland

Garanti och support

For warranty information and customer support, please refer to the documentation included with your product or visit the official BRITA webwebbplats. Spara ditt inköpsbevis för garantiärenden.

Du kan också besöka BRITA Store on Amazon för fler produkter och information.

Relaterade dokument - 1043450

Preview BRITA ON TAP och ON TAP Pro kranvattenfilter bruksanvisning
Omfattande användarmanual för BRITA ON TAP och ON TAP Pro kranvattenfiltersystem, som täcker installation, drift, underhåll och felsökning. Lär dig mer om filterbyte, säkerhetsanvisningar och korrekt avfallshantering.
Preview BRITA ON TAP & ON TAP Pro: Bruksanvisning och installationsguide
Omfattande guide för BRITA ON TAP och ON TAP Pro vattenfiltersystem, som täcker installation, drift, underhåll och felsökning för renare och fräschare vatten.
Preview BRITA ON TAP & ON TAP Pro Installations- och användarmanual
Omfattande guide för installation och användning av BRITA ON TAP och ON TAP Pro vattenfiltersystem, som täcker funktioner, underhåll och felsökning för renare och fräschare vatten.
Preview BRITA AquaAroma Crema vattenfilterpatron: Installations-, användnings- och säkerhetsguide
Omfattande guide för BRITA AquaAroma Crema vattenfilterpatron, som täcker installation, justering av aromratt, byte av filterpatron, kapacitet och viktiga säkerhetsinstruktioner för kaffe- och espressomaskiner. Innehåller kontaktinformation för BRITA världen över.
Preview BRITA vattenfilterkanna bruksanvisning
Omfattande bruksanvisning för BRITA vattenfilterkannor med MAXTRA PRO vattenfilter, med detaljerad information om installation, drift, underhåll och filterbyte. Lär dig mer om avancerad filtreringsteknik, hållbarhet och produktfunktioner.
Preview BRITA vattenfilterkannor: Bruksanvisning och guide
Omfattande instruktioner och vägledning för BRITA vattenfilterkannor, inklusive installation, användning, underhåll och felsökning. Lär dig mer om MAXTRA+ filterteknik, filterbytesindikatorer och optimal prestanda.