SHD043A HDMI Display Module
Specifications
- Model No.: SHD043A-800480
- LCD Display Size (Diagonal): 4.3 inch
- Module Structure: LCD Display + CTP Touch +
PCB - LCD Display Type: TFT/IPS
- Recommended Viewing Direction: ALL VIEW
- Number of Pixels (Resolution): 800×480
pixels - Color Pixel Arrangement: RGB Stripe
- Interface: HDMI for Display, USB for Touch
& Power - System Support: Win7/Win8/Win10, Android/Linux
(configuration needed) - Power Supply: Micro USB (5.0V)
- Module Power Consumption: 500mA (Max)
- Color Numbers: 16.7M
- Backlight Type: White LED
Product Usage Instructions
1. Installation
Connect the HDMI interface of the display module to your
device’s HDMI output. For touch functionality and power, connect
the USB interface to your device.
2. Powering On
Use a Micro USB cable to provide power to the module with a 5.0V
power supply.
3. System Configuration
If using Android/Linux, ensure proper configuration is done for
compatibility.
4. Viewing Content
The recommended viewing direction is ALL VIEW, ensuring optimal
display quality.
Frequently Asked Questions (FAQ)
Q: What is the recommended operating temperature for the
display module?
A: The operating temperature range is -20 to +70 degrees
Celsius.
Q: How do I connect the display module to my device?
A: Connect the HDMI interface for display and the USB interface
for touch functionality and power.
Q: What system support is available for the module?
A: The module supports Win7/Win8/Win10 plug and play, and for
Android/Linux, configuration is required.
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
Surenoo HDMI Display Module Series
Model No.: SHD043A-800480
USER MANUAL
Please click the following image to buy the sample
Shenzhen Surenoo Technology Co.,Ltd. www.surenoo.com
Reference Links
Surenoo HDMI Display Module Selection Guide
www.surenoo.com
P.01
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
CONTENTS
1GENERAL INFORMATION 2EXTERNAL DIMENSIONS 3ABSOLUTE MAXIMUM RATINGS 4ELECTRICAL CHARACTERISTICS 5CTP CHARACTERISTICS 6ELECTRO-OPTICAL CHARACTERISTICS 7INTERFACE DESCRIPTION 8INPUT TIMING 9RELIABILITY TEST CONDITIONS 10INSPECTION CRITERION 11PRODUCT PHOTOS
Model No.: SHD043A-800480
www.surenoo.com
P.02
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
1GENERAL INFORMATION
Item of general information
Contents
Unit
LCD Display Size (Diagonal)
4.3
inch
Module Structure
LCD Display + CTP Touch + PCB
–
LCD Display Type
TFT/IPS
–
LCD Display Mode
Normally Black
–
Recommended Viewing Direction
ALL VIEW
–
Module size (W×H×T)
105.80×85.09×6.73/5.00
mm
Active area (W×H)
95.04×53.86
mm
Number of pixels (Resolution)
800RGB×480
pixel
Pixel pitch (W×H)
0.1188×0.1122
mm
Color Pixel Arrangement
RGB Stripe
–
LCD Display
HDMI interface
–
Module Interface Type
CTP Touch
USB interface
–
System Support
Win7/Win8/Win10(Plug and play)
–
Android/Linux (need to be configured first) –
Power Supply
Micro USB (5.0V)
–
Module Power consumption
500(Max)
mA
Color Numbers
16.7M
–
Backlight Type
White LED
–
www.surenoo.com
P.03
P.04
Model No.: SHD043A-800480
Customer Approved
(With CTP) (Without TP)
REV NO. V0
Contents First release
Date 2019-03-08
HDMI
61
Micro USB
40
1
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
2EXTERNAL DIMENSIONS HDMI(for DISPLAY) PIN SYMBOL 1 TMDS Data2+ 2 TMDS Data2 Shield 3 TMDS Data24 TMDS Data1+ 5 TMDS Data1 Shield 6 TMDS Data17 TMDS Data0+ 8 TMDS Data0 Shield 9 TMDS Data010 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock13 CEC 14 Reserved 15 SCL 16 SDA 17 DDC/CEC Ground 18 +5V Power 19 Hot Plug Detect USB(for TOUCH&POWER) PIN SYMBOL 1 VBUS(5V) 2 USB D3 USB D+ 4 NC 5 GND
www.surenoo.com
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Display Type:
4.3”TFT IPS
Driver IC:
–
Pixel Pitch: 0.1188mm X 0.1122mm
Display Mode:
Normally Black Operating Temperature: -20 to +70
LCM Brightness:
Viewing Direction: (Gray inversion)
ALL VIEW
Storage Temperature:
-30 to +80
Backlight:
Display Resolution: 800(RGB)X480 pixels
Structure:
PCB+LCD(+CTP)
Material Note:
THIS DRAWING IS PROPERTY OF SURENOO TECHNOLOGY, IT CANNOT BE REPRODUCED WITHOUT PERMISSION.
4
3
350-400cd/m^2 White LED(5×2=10)
ROHS Request
2
Product NO: Part NO:
SHD043A-800480
SUR(43WV003-WCT/43WV005-WOT)
CTP Model APPD Henry
Rev V0
Unit: mm CHKD Eric
Date: 2019-03-08 Scale1:1 DWN Unmarked Tolerance:±0.20mm Sheet
1
Jason 1 OF 1
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
3ABSOLUTE MAXIMUM RATINGS
Parameter of absolute
Symbol
Min
maximum ratings
Max
Unit
Operating temperature
Top
-20
70
Storage temperature
Tst
-30
80
Humidity
RH
–
90%(Max 60) RH
Note: Absolute maximum ratings mean the product can withstand short-term, not more than
120 hours. If the product is a long time to withstand these conditions, the life time would be
shorter.
4ELECTRICAL CHARACTERISTICS(DC CHARACTERISTICS)
Parameter of DC characteristics
Symbol
Min.
Typ.
Max.
Unit
PCB operating voltage
VUSB
4.8
5.0
–
V
LCD I/O operating voltage VDD
3.0
3.3
3.6
V
Input voltage `H’ level
VIH
0.7*VDD
–
VDD
V
Input voltage `L’ level
VIL
VSS
–
0.3*VDD V
Output voltage `H’ level
VOH VDD-0.4
–
VDD
V
Output voltage `L’ level
VOL
VSS
–
VSS+0.4
V
www.surenoo.com
P.05
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
5CTP CHARACTERISTICS
Item of CTP characteristics
Specification
Panel Type
Glass Cover + Glass Sensor
Resolution
800 × 480
Surface Hardness
6H
Transparency
82%
Driver IC
–
Interface Type
USB
Support Points
5Max
Sampling Rate
20~100
Supply voltage
3.3
Model No.: SHD043A-800480
Unit
Remark
–
–
pixel
–
–
–
–
–
–
–
–
–
–
–
Hz
–
V
–
www.surenoo.com
P.06
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
6ELECTRO-OPTICAL CHARACTERISTICS
Item of
electro-optical Symbol Condition Min. Typ. Max. Unit Remark Note
characteristics
Response time
Tr+Tf
–
30
40
ms
FIG 1.
4
Contrast Ratio
CR
=0 =0
640 800
–
Luminance uniformity WHITE Ta=25
–
80
–
–
FIG 2.
1
%
FIG 2.
3
Surface Luminance
Lv
–
350
– cd/m2 FIG 2.
2
White x White
White y
0.309 0.313 0.315 0.337 0.339 0.341
Red x
0.629 0.631 0.633
CIE (x, y) chromaticity
Red Green
Red y Green x Green y
=0 =0
Ta=25
0.327 0.326 0.546
0.329 0.328 0.548
0.331 0.330 0.550
–
FIG 2.
5
Blue x Blue
Blue y
0.134 0.136 0.138 0.139 0.141 0.143
=90(12 o’clock)
70
80
–
deg
Viewing =270(6 o’clock) angle range =0(3 o’clock)
CR 10
70 70
80 80
–
deg deg
FIG 3.
6
=180(9 o’clock)
70
80
–
deg
NTSC ratio
–
–
–
50
–
%
–
–
Note 1. Contrast Ratio(CR) is defined mathematically by the following formula. For more
information see FIG 2.:
Note 2. Surface luminance is the LCD surface from the surface with all pixels displaying white. For more information see FIG 2.
Lv=Average Surface Luminance with all white pixels (P1,P2,P3,P4,P5,P6,P7,P8,P9) Note 3. The uniformity in surface luminanceWHITEis determined by measuring
www.surenoo.com
P.07
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
luminance at each test position 1 through 9, and then dividing the maximum luminance of 9points luminance by minimum luminance of 9 points luminance. For more information see FIG 2.
Note 4. Response time is the time required for the display to transition from White to black(Rise Time, Tr) and from black to white(Decay Time, Tf). For additional information see FIG 1. Note 5. CIE (x, y) chromaticity ,The x,y value is determined by screen active area position 5. For more information see FIG 2. Note 6. Viewing angle is the angle at which the contrast ratio is greater than a specific value. For TFT module, the specific value of contrast ratio is 10.The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG 3. Note 7. For Viewing angle and response time testing, the testing data is base on Autronic-Melchers’s ConoScope. Series Instruments. For contrast ratio, Surface Luminance, Luminance uniformity and CIEthe testing data is base on BM-7 photo detector. Note 8. For TN type TFT transmissive module, Gray scale reverse occurs in the direction of panel viewing angle. FIG.1. The definition of Response Time
www.surenoo.com
P.08
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
FIG.2. Measuring method for Contrast ratio, surface luminance, Luminance uniformity,
CIE (x , y) chromaticity
A : H/6 ; B : V/6 ; H,V : Active Area(AA) size Measurement instrument: BM-7; Light spot size=5mm, 350mm distance from the LCD surface to detector lens.
FIG.3. The definition of viewing angle
www.surenoo.com
P.09
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
7INTERFACE DESCRIPTION
AHDMI Interface Description
NO.
Symbol
1
TMDS Data2+
2
TMDS Data2 Shield
3
TMDS Data2-
4
TMDS Data1+
5
TMDS Data1 Shield
6
TMDS Data1-
7
TMDS Data0+
8
TMDS Data0 Shield
9
TMDS Data0-
10
TMDS Clock+
11
TMDS Clock Shield
12
TMDS Clock-
13
CEC
14
Reserved(N.C.)
15
SCL
16
SDA
17
DDC/CEC Ground
18
+5V Power
19
Hot Plug Detect
BUSB Interface Description
DESCRIPTION
Positive side of channel 2 TMDS low-voltage signal differential input pair Ground
Negative side of channel 2 TMDS low-voltage signal differential input pair
Positive side of channel 1 TMDS low-voltage signal differential input pair Ground
Negative side of channel 1 TMDS low-voltage signal differential input pair
Positive side of channel 0 TMDS low-voltage signal differential input pair Ground
Negative side of channel 0 TMDS low-voltage signal differential input pair
Positive side of reference clock. TMDS low-voltage signal differential input pair Ground
Negative side of reference clock. TMDS low-voltage signal differential input pair No Connection No Connection DDC SCL DDC SDA Ground +5V Power Hot Plug Detect
NO. Symbol
DESCRIPTION
1
VUSB
2
D-
3
D+
4
NC
5
GND
USB Power USB DataUSB Data+ No connection Power Ground
Application Note: Please connect the USB first, and then connect the HDMI interface.
www.surenoo.com
P.10
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
8LCD TIMING
Parameter
Value
Symbol
Unit
Min. Typ. Max.
PCLK frequency@ Frame rate=60Hz PCLK
–
30
50 MHz
Horizontal display area
thd
800
PCLK
Horizontal period time
th
889
928
1143 PCLK
HSYNC Back Porch
thbp
–
88
–
PCLK
HSYNC Front Porch
thfp
1
40
255 PCLK
HSYNC Pulse Width
thw
1
48
255 PCLK
Vertical display area
tvd
480
H
VSYNC period time
tv
513
525
767
H
VSYNC Back Porch
tvbp
–
32
–
H
VSYNC Front Porch
tvfp
1
13
255
H
VSYNC Pulse Width
tvw
3
3
255
H
www.surenoo.com
P.11
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
9RELIABILITY TEST CONDITIONS
No.
Test Item
Test Condition
1 High Temperature Storage
80/120 hours
2
Low Temperature Storage
-30/120 hours
3 High Temperature Operating
70/120 hours
4 Low Temperature Operating
-20/120 hours
5 Temperature Cycle Storage -20(30min.)~25(5min.)~70(30min.)×10cycles
AInspection after test:
Inspection after 2~4 hours storage at room temperature, the sample shall be free from
defects:
Air bubble in the LCD;
Sealleak;
Non-display; Missing segments;
Glass crack; Current is twice higher than initial value.
BRemark:
The test samples should be applied to only one test item.
Sample size for each test item is 5~10pcs.
Failure Judgment Criterion: Basic Specification, Electrical Characteristic, Mechanical
Characteristic, Optical Characteristic.
www.surenoo.com
P.12
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
10INSPECTION CRITERION
This specification is made to be used as the standard of acceptance/rejection criteria for TFT-LCD/IPS TFT-LCD module product, and this specification is applicable only in the case that the size of module equal to or exceed than 3.5 inch. 10.1 Sample plan Sampling plan according to GB/T2828.1-2003/ISO 2859-11999 and ANSI/ASQC Z1.4-1993,normal level 2 and based on: Major defect: AQL 0.65 Minor defect: AQL 1.5 10.2 Inspection condition Viewing distance for cosmetic inspection is about 30cm with bare eyes, and under an environment of 20~40W light intensity, all directions for inspecting the sample should be within 45°against perpendicular line. (Normal temperature 20~25and normal humidity 60 ±15%RH ) 10.3 Definition of Inspection Item. ADefinition of inspection zone in LCD.
www.surenoo.com
P.13
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
Zone A: character/Digit area
Zone B: viewing area except Zone A (Zone A + Zone B=minimum Viewing area)
Zone C: Outside viewing area (invisible area after assembly in customer’s product)
Fig.1 Inspection zones in an LCD
Note: As a general rule, visual defects in Zone C are permissible, when it is no trouble for
quality and assembly of customer’s product. B Definition of some visual defect
Because of losing all or part function, bad pixel dots appear bright and the
Bright dot size is more than 50% of one dot in which LCD panel is displaying under
black pattern.
Dark dot
Dots appear dark and unchanged in size in which LCD panel is displaying under pure red, green, blue picture, or pure whiter picture.
10.4 Major Defect
Item
Items to be
No.
inspected
Inspection standard
Classification of defects
1) No display
2) Display abnormally
3) Missing vertical, horizontal segment
1
Functional defects 4) Short circuit
5) Excess power consumption 6)Backlight no lighting, flickering and abnormal
major
lighting
2
Missing
Missing component
3
Outline dimension
Overall outline dimension beyond the drawing is not allowed
www.surenoo.com
P.14
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
10.5 Minor Defect
Item No.
1
2
Items to be inspected
Bright dot /dark dot
defect
Inspection standard
Zone
Acceptable Qty
A+B
3.57″ 710.1″ 10.1″ C
Bright pixel dot
1
2
3
Acceptable
Dark pixel dot
4
4
4
2bright dots adjacent
0
0
0
2dark dots adjacent
0
0
0
Total bright and dark
5
6
7
dots
Note: Minimum distance between defective dots is more than 5mm;
Pixel dots’ function is normal, but bright dots caused by foreign
material and other reasons are judged by the dot defect of 5.2.
Zone
Acceptable Qty
A+B
Size(mm)
0.2
3.5″7″
710.1″
10.1″
C
Acceptable Acceptable Acceptable
Classification of defects
Minor
Acceptable
0.20.5
4
5
6
0.5
0
0
0
Note: 1. Minimum distance between defective dots is more than 5 mm; 2. The quantity of defect is zero in operating condition.
Minor
Zone
Acceptable Qty
Size (mm)
A+B
Linear
Length Width 3.5″7″ 710.1″
10.1″
C
3
defect
Ignore W0.05 Acceptable Acceptable Acceptable
Minor
Acceptable
L5.0
0.05 W0.1
4
5
6
L5.0 W0.1
0
0
0
www.surenoo.com
P.15
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
5.4.1 Polarizer Position
( i) Shifting in position should not exceed the glass outline
dimension.
( ii ) Incomplete covering of the viewing area due to shifting is not
allowed.
5.4.2 Dirt on polarizer
Dirt which can be wiped easily should be acceptable.
5.4.3 Polarizer Dent & Air bubble
Zone
Acceptable Qty
A+B
Size(mm)
3.5″7″
710.1″
10.1″
C
0.2
Acceptable Acceptable Acceptable
Acceptable
0.20.5
4
5
6
4
Polarizer defect
0.5
0
5.4.4 Polarizer scratch
0
0
Minor
(i) If the polarizer scratch can be seen after cover assembling
or in the operating condition, judge by the linear defect of 5.3.
( ii )If the polarizer scratch can be seen only in non-operating
condition or some special angle, judge by the following:
Zone
Acceptable Qty
Size (mm)
A+B
Length Width 3.5″7″ 710.1″
10.1″
C
Acceptable
Ignore
1.0L 5.0 L5.0
W0.05 0.05 W0.20 W0.2
Acceptable
4 0
Acceptable
5 0
Acceptable
6 0
MURA
Using 3% ND filter, it’s NG if it can be seen in R,G,B picture.
5
White/Black dotMURA
Visible underND3%D0.15mm, Acceptable 0.15mm<D0.5mm, N4D>0.5mm, Not allowable.
Minor
www.surenoo.com
P.16
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
(i) Crack Cracks are not allowed.
(ii) TFT chips on corner
Model No.: SHD043A-800480
Minor
Minor
6
Glass defect
X 3.0
Y 3.0
Z Not more than the thickness of glass
Acceptable N3
Chips on the corner of terminal shall not be allowed to extend
into the ITO pad or expose perimeter seal.
(iii) Usual surface crack
X
Y
Z
Acceptable
1.5
1.5
Not more than the thickness of glass
N4
It is only applicable to the upper glass of LCD.
Minor
www.surenoo.com
P.17
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD043A-800480
10.6 Module Cosmetic Criteria
Item No.
1 2
3
4 5 6
7
8 9 10
Items to be inspected
Difference in Spec. Pattern peeling
Soldering defects
Resist flaw on PCB FPC gold finger Backlight plastic frame
Marking printing effect Accretion of metallic Foreign matter Stain Plate discoloring
Inspection Standard
Not allowable No substrate pattern peeling and floating No soldering missing No soldering bridge No cold soldering Visible copper foil (0.5 mm or more) on substrate pattern is not allowed No dirt, breaking, oxidation lead to black No deformation, crack, breaking, backlight positioning column breaking, obvious nick. No dark marking, incomplete, deformation lead to unable to judge
No accretion of metallic foreign matter (Not exceed 0.2mm)
No stain to spoil cosmetic badly No plate fading, rusting and discoloring
Classification of defects
Major Major Major Major Minor
Minor
Major
Minor
Minor
Minor
Minor Minor
1. Lead parts
a. Soldering side of PCB Solder to form a `Filet’ all around the lead. Solder should not hide the lead form perfectly.
b. Components side(In case of `Through Hole PCB’) Solder to reach the Components side of PCB.
Minor Minor
2. Flat packages
Either `Toe'(A) or `Seal'(B)of the lead to be covered by “Filet”. Lead form to be assume over Solder.
Minor
11 3. Chips
(3/2) H h (1/2) H
4. Solder ball/Solder splash
a. The spacing between solder ball and the conductor or solder pad h 0.13 mm. The diameter of solder ball d0.15 mm. b. The quantity of solder balls or solder splashes isn’t beyond 5 in 600 mm2.
c. Solder balls/Solder splashes do not violate minimum electrical clearance.
www.surenoo.com
Minor Minor Minor Major
P.18
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
11PRODUCT PHOTOS
Model No.: SHD043A-800480
www.surenoo.com
P.19
Documents / Resources
 |
Surenoo SHD043A HDMI Display Module [pdf] User Manual SHD043A-800480, SHD043A HDMI Display Module, HDMI Display Module, Display Module, Module |