Surenoo Display SHD050C Surenoo HDMI Display Module User Manual

CONTENTS
1GENERAL INFORMATION 2EXTERNAL DIMENSIONS 3ABSOLUTE MAXIMUM RATINGS 4ELECTRICAL CHARACTERISTICS 5CTP CHARACTERISTICS 6ELECTRO-OPTICAL CHARACTERISTICS 7INTERFACE DESCRIPTION 8INPUT TIMING 9RELIABILITY TEST CONDITIONS 10INSPECTION CRITERION 11PRODUCT PHOTOS

Model No.: SHD050C-1024600

www.surenoo.com

P.02

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

1GENERAL INFORMATION

Item of general information

Contents

Unit

LCD Display Size (Diagonal)

5.0

inch

Module Structure

LCD Display + CTP Touch + PCB

–

LCD Display Type

TFT/TRANSMISSIVE

–

LCD Display Mode

TN: Normally White, IPS: Normally Black

–

Viewing Direction (Gray inversion)

All VIEW

o’clock

Module size (W×H×T)

121.31×95.47×13.93

Active area (W×H)

108.00×64.80

Number of pixels (Resolution)

1024RGB×600

Pixel

Pixel pitch (W×H)

0.1461×0.1462

Color Pixel Arrangement

RGB Stripe

–

Module Interface Type

LCD Display

HDMI interface

–

CTP Touch

USB interface GT911

–

System Support

Win7/Win8/Win10(Plug and play)

–

Android/Linux (need to be configured first) –

Power Supply

USB (5.0V)

–

Module Power consumption

2.3(Max)

Color Numbers

16.7M

–

Backlight Type

White LED

–

www.surenoo.com

P.03

P.04

Model No.: SHD050C-1024600

Customer Approved

R G B

121.31
121.11 113.11 109.20 108.00 LCD_AA 104.91

5.0″ IPS 1024 X RGB X 600

95.47 85.92 78.13 75.65 66.05 64.80LCD_AA

13.93 7.65 6.06

24.85

12.20

REV NO. V0

Contents First release

Date 2020-03-16

10.60 11.26

22.91

24.45

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

2EXTERNAL DIMENSIONS

www.surenoo.com

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Display Type:

5.0” IPS

Driver IC:

–

Pixel Pitch:

Display Mode:
Viewing Direction: (Gray inversion)
Display Resolution:

Normally Black

Operating Temperature:

ALL O’Clock

Storage Temperature:

1024(RGB)X600 pixels

Structure:

-30 to +80 -30 to +80 LCD+CTP+PCB

LCM Brightness: Backlight: Material Note:

THIS DRAWING IS PROPERTY OF SURENOO TECHNOLOGY, IT CANNOT BE REPRODUCED WITHOUT PERMISSION.

0.1461mm X 0.1462mm 430 cd/m^2
White LED(6X3) ROHS Request

Product NO: Model No.: SHN050C-1024600

Part NO:

CTP Moudel

APPD Henry

Rev

Unit: mm CHKD

Eric

Date: 2020-03-16 Scale 1:1
Unmarked Tolerance: ±0.20mm

DWN Sheet

Jason
1 OF 1

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

3ABSOLUTE MAXIMUM RATINGS

Parameter of absolute

Symbol

Min

maximum ratings

Max

Unit

Operating temperature

Top

-20

Storage temperature

Tst

-30

Humidity

–

90%(Max 60) RH

Note: Absolute maximum ratings means the product can withstand short-term, not more than

120 hours. If the product is a long time to withstand these conditions, the life time would be

shorter.
4ELECTRICAL CHARACTERISTICS(DC CHARACTERISTICS)

Parameter of DC characteristics

Symbol

Min.

Typ.

Max.

Unit

PCB operating voltage

VUSB

–

5.0

–

LCD I/O operating voltage VDD

3.0

3.3

3.6

Input voltage `H’ level

VIH

0.7*VDD

–

VDD

Input voltage `L’ level

VIL

VSS

–

0.3*VDD V

Output voltage `H’ level

VOH VDD-0.4

–

VDD

Output voltage `L’ level

VOL

VSS

–

VSS+0.4

www.surenoo.com

P.06

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

5CTP CHARACTERISTICS

Item of CTP characteristics

Specification

Panel Type

Glass Cover + Glass Sensor

Resolution

1024 x 600

Surface Hardness

Transparency

82%

Driver IC

GT911

Interface Type

USB

Support Points

Sampling Rate

20~100

Supply voltage

3.3

Model No.: SHD050C-1024600

Unit

Remark

–

Pixel

–

www.surenoo.com

P.06

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

6ELECTRO-OPTICAL CHARACTERISTICS

Item of

electro-optical Symbol Condition Min. Typ. Max. Unit Remark Note

characteristics

Response time Contrast Ratio

Tr+Tf CR

=0 =0

–

FIG 1.

–

350

–

FIG 2.

Luminance uniformity WHITE Ta=25

–

FIG 2.

Surface Luminance

–

400

– cd/m2 FIG 2.

White x White White y

– 0.317 – 0.324 –

CIE (x, y) chromaticity

Red Green

Red x Red y Green x Green y

=0 =0
Ta=25

– 0.633 – 0.341 – 0.324 – 0.551 –

–

FIG 2.

Blue x Blue Blue y

– 0.153 – 0.143 –

=90(12 o’clock)

–

deg

Viewing =270(6 o’clock) angle range =0(3 o’clock)

CR t 10

–

60 65

–

deg deg

FIG 3.

=180(9 o’clock)

–

deg

NTSC ratio

–

Note 1. Contrast Ratio(CR) is defined mathematically by the following formula. For more

information see FIG 2.:

Note 2. Surface luminance is the LCD surface from the surface with all pixels displaying white. For more information see FIG 2.
Lv=Average Surface Luminance with all white pixels (P1,P2,P3,P4,P5,P6,P7,P8,P9) Note 3. The uniformity in surface luminance WHITEis determined by measuring

www.surenoo.com

P.07

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

luminance at each test position 1 through 9, and then dividing the maximum luminance of 9points luminance by minimum luminance of 9 points luminance. For more information see FIG 2.

Note 4. Response time is the time required for the display to transition from White to black(Rise Time, Tr) and from black to white(Decay Time, Tf). For additional information see FIG 1. Note 5. CIE (x, y) chromaticity ,The x,y value is determined by screen active area position 5. For more information see FIG 2. Note 6. Viewing angle is the angle at which the contrast ratio is greater than a specific value. For TFT module, the specific value of contrast ratio is 10.The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG 3. Note 7. For Viewing angle and response time testing, the testing data is base on Autronic-Melchers’s ConoScope. Series Instruments. For contrast ratio, Surface Luminance, Luminance uniformity and CIEthe testing data is base on BM-7 photo detector. Note 8. For TN type TFT transmissive module, Gray scale reverse occurs in the direction of panel viewing angle. FIG.1. The definition of Response Time

www.surenoo.com

P.08

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

FIG.2. Measuring method for Contrast ratio, surface luminance, Luminance uniformity,
CIE (x , y) chromaticity
A : H/6 ; B : V/6 ; H,V : Active Area(AA) size Measurement instrument: BM-7; Light spot size=5mm, 350mm distance from the LCD surface to detector lens.

FIG.3. The definition of viewing angle

www.surenoo.com

P.09

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

7INTERFACE DESCRIPTION

AHDMI Interface Description 20Pin-0.5mm-FPC (Connector)

Identi er

Function Description

Floating

RX0_N

Data transmission pin, used to transmit the di erential data signal of channel 0

GND

Ground Pin

RX0_P

Data transmission pin, used to transmit the di erential data signal of channel 0

RX1_N

Data transmission pin, used to transmit the di erential data signal of channel 1

GND

Ground Pin

RX1_P

Data transmission pin, used to transmit the di erential data signal of channel 1

RX2_N

Data transmission pin, used to transmit the di erential data signal of channel 2

GND

Ground Pin

RX2_P

Data transmission pin, used to transmit the di erential data signal of channel 2

RXC_N

Clock transmission pin, used to transmit the di erential clock signal

GND

Ground Pin

RXC_P

Clock transmission pin, used to transmit the di erential clock signal

Floating

HDMI SCL

IIC clock line, which provides a clock signal for data transmission

HDMI SDA

IIC data line, used for actual data transmission

GND

Ground Pin

HDMI 5V

Power pin, providing 5V power supply

HDMI HPD0

It is the hot-plug detection signal pin in the HDMI interface

BUSB Interface Description 4Pin-1.25mm Connector

Identi er

Function Description

5.0V

Power pin, providing 5V power supply

D+

Data transmission pin, used to transmit di erential data signals

D-

Data transmission pin, used to transmit di erential data signals

GND

Power Ground

Application Note: Please connect the USB first, and then connect the HDMI interface.

www.surenoo.com

P.10

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

8LCD TIMING

Horizontal input Timing table

Parameter
DCLK frequency@ Frame rate=60Hz Horizontal display area 1 Horizontal Line HSYNC pulse width HSYNC Blanking HSYNC Front Porch Vertical display area VSYNC period time VSYNC pulse width VSYNC Blanking VSYNC Front Porch

Symbol
DCLK thd th thpw thb thfp tvd tv tvpw tvb tvfp

Min.
44.9
1200 1
160 16
624 1 23 1

Vertical input Timing table

Parameter
DCLK frequency@ Frame rate=60Hz Horizontal display area HSYNC period time HSYNC Blanking Vertical display area VSYNC period time VSYNC Blanking

Symbol
DCLK thd th
thb + thfp tvd tv
tvb + tvfp

Min.
40.8
1114 90
610 10

Value
Typ.
51.2 1024 1344
160 160 600 635
23 12
Value
Typ.
51.2 1024 1344 320 600 635 35

Max.
63
1400 140 160 216
750 20 23 127
Max.
67.2
1400 376
800 200

Unit
MHz DCLK DCLK DCLK DCLK DCLK
H H H H H
Unit
MHz DCLK DCLK DCLK
H H H

www.surenoo.com

P.11

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

9RELIABILITY TEST CONDITIONS

No.

Test Item

Test Condition

1 High Temperature Storage

80/120 hours

Low Temperature Storage

-30/120 hours

3 High Temperature Operating

70/120 hours

4 Low Temperature Operating

-20/120 hours

5 Temperature Cycle Storage -20(30min.)~25(5min.)~70(30min.)×10cycles

AInspection after test:

Inspection after 2~4 hours storage at room temperature, the sample shall be free from

defects:

¾ Air bubble in the LCD;

¾ Sealleak;

¾ Non-display; ¾ Missing segments;

¾ Glass crack; ¾ Current is twice higher than initial value.

BRemark:

¾ The test samples should be applied to only one test item.

¾ Sample size for each test item is 5~10pcs.

¾ Failure Judgment Criterion: Basic Specification, Electrical Characteristic, Mechanical

Characteristic, Optical Characteristic.

www.surenoo.com

P.12

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

10INSPECTION CRITERION
This specification is made to be used as the standard of acceptance/rejection criteria for TFT-LCD/IPS TFT-LCD module product, and this specification is applicable only in the case that the size of module equal to or exceed than 3.5 inch. 10.1 Sample plan Sampling plan according to GB/T2828.1-2003/ISO 2859-11999 and ANSI/ASQC Z1.4-1993,normal level 2 and based on: Major defect: AQL 0.65 Minor defect: AQL 1.5 10.2 Inspection condition Viewing distance for cosmetic inspection is about 30cm with bare eyes, and under an environment of 20~40W light intensity, all directions for inspecting the sample should be within 45q against perpendicular line. (Normal temperature 20~25and normal humidity 60 r 15%RH ) 10.3 Definition of Inspection Item. ADefinition of inspection zone in LCD.

www.surenoo.com

P.13

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

Zone A: character/Digit area

Zone B: viewing area except Zone A (Zone A + Zone B=minimum Viewing area)

Zone C: Outside viewing area (invisible area after assembly in customer’s product)

Fig.1 Inspection zones in an LCD

Note: As a general rule, visual defects in Zone C are permissible, when it is no trouble for

quality and assembly of customer’s product. B Definition of some visual defect

Because of losing all or part function, bad pixel dots appear bright and the

Bright dot size is more than 50% of one dot in which LCD panel is displaying under

black pattern.

Dark dot

Dots appear dark and unchanged in size in which LCD panel is displaying under pure red, green, blue picture, or pure whiter picture.

10.4 Major Defect

Item

Items to be

No.

inspected

Inspection standard

Classification of defects

1) No display

2) Display abnormally

3) Missing vertical, horizontal segment

Functional defects 4) Short circuit

5) Excess power consumption 6)Backlight no lighting, flickering and abnormal

major

lighting

Missing

Missing component

Outline dimension

Overall outline dimension beyond the drawing is not allowed

www.surenoo.com

P.14

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

10.5 Minor Defect

Item No.
1
2

Items to be inspected
Bright dot /dark dot
defect

Inspection standard

Zone

Acceptable Qty

A+B

3.5″ 710.1″ 10.1″
C
7″

Bright pixel dot

Acceptable

Dark pixel dot

2bright dots adjacent

2dark dots adjacent

Total bright and dark

dots

Note: Minimum distance between defective dots is more than 5mm;

Pixel dots’ function is normal, but bright dots caused by foreign

material and other reasons are judged by the dot defect of 5.2.

Zone

Acceptable Qty

Size(mm)
0.2

A+B

3.5″7″

710.1″

10.1″

Acceptable Acceptable Acceptable

Classification of defects
Minor

Acceptable

0.20.5

0.5

Note: 1. Minimum distance between defective dots is more than 5 mm; 2. The quantity of defect is zero in operating condition.

Minor

Zone

Acceptable Qty

Size (mm)

A+B

Linear

Length Width 3.5″7″ 710.1″

10.1″

Minor

defect

Ignore W0.05 Acceptable Acceptable Acceptable

Acceptable

L5.0

0.05 W0.1

L5.0 W0.1

www.surenoo.com

P.15

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

5.4.1 Polarizer Position

( i) Shifting in position should not exceed the glass outline

dimension.

( ii ) Incomplete covering of the viewing area due to shifting is not

allowed.

5.4.2 Dirt on polarizer

Dirt which can be wiped easily should be acceptable.

5.4.3 Polarizer Dent & Air bubble

Zone

Acceptable Qty

A+B

Size(mm)

3.5″7″

710.1″

10.1″

0.2

Acceptable Acceptable Acceptable

Acceptable

0.20.5

Polarizer defect

0.5

5.4.4 Polarizer scratch

Minor

(i) If the polarizer scratch can be seen after cover assembling

or in the operating condition, judge by the linear defect of 5.3.

( ii )If the polarizer scratch can be seen only in non-operating

condition or some special angle, judge by the following:

Zone

Acceptable Qty

Size (mm)

A+B

Length Width 3.5″7″ 710.1″

10.1″

Acceptable

Ignore
1.0L 5.0 L5.0

W0.05 0.05 W0.20 W0.2

Acceptable
4 0

Acceptable
5 0

Acceptable
6 0

MURA

Using 3% ND filter, it’s NG if it can be seen in R,G,B picture.

5
White/Black dotMURA

Visible underND3%D0.15mm, Acceptable 0.15mm<D0.5mm, N4D>0.5mm, Not allowable.

Minor

www.surenoo.com

P.16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

(i) Crack Cracks are not allowed.
(ii) TFT chips on corner

Model No.: SHD050C-1024600
Minor

Minor

Glass defect

X 3.0

Y 3.0

Z Not more than the thickness of glass

Acceptable N3

Chips on the corner of terminal shall not be allowed to extend

into the ITO pad or expose perimeter seal.

(iii) Usual surface crack

Acceptable

1.5

Not more than the thickness of glass

It is only applicable to the upper glass of LCD.

Minor

www.surenoo.com

P.17

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SHD050C-1024600

10.6 Module Cosmetic Criteria

Item No.
1 2
3
4 5 6
7
8 9 10

Items to be inspected
Difference in Spec. Pattern peeling
Soldering defects
Resist flaw on PCB FPC gold finger Backlight plastic frame
Marking printing effect Accretion of metallic Foreign matter Stain Plate discoloring

Inspection Standard
Not allowable No substrate pattern peeling and floating No soldering missing No soldering bridge No cold soldering Visible copper foil (0.5 mm or more) on substrate pattern is not allowed No dirt, breaking, oxidation lead to black No deformation, crack, breaking, backlight positioning column breaking, obvious nick. No dark marking, incomplete, deformation lead to unable to judge
No accretion of metallic foreign matter (Not exceed 0.2mm)
No stain to spoil cosmetic badly No plate fading, rusting and discoloring

Classification of defects
Major Major Major Major Minor
Minor
Major
Minor
Minor
Minor
Minor Minor

1. Lead parts

a. Soldering side of PCB Solder to form a `Filet’ all around the lead. Solder should not hide the lead form perfectly.
b. Components side(In case of `Through Hole PCB’) Solder to reach the Components side of PCB.

Minor Minor

2. Flat packages

Either `Toe'(A) or `Seal'(B)of the lead to be covered by “Filet”. Lead form to be assume over Solder.

Minor

11 3. Chips

(3/2) H h (1/2) H

4. Solder ball/Solder splash

a. The spacing between solder ball and the conductor or solder pad h 0.13 mm. The diameter of solder ball d0.15 mm. b. The quantity of solder balls or solder splashes isn’t beyond 5 in 600 mm2.
c. Solder balls/Solder splashes do not violate minimum electrical clearance.

www.surenoo.com

Minor Minor Minor Major
P.18

Documents / Resources

Surenoo Display SHD050C Surenoo HDMI Display Module [pdf] User Manual
SHD050C-1024600, SHD050C Surenoo HDMI Display Module, Surenoo HDMI Display Module, HDMI Display Module, Display Module, Module

References

User Manual

Surenoo Display SHD050C Surenoo HDMI Display Module User Manual

SHD050C Surenoo HDMI Display Module

Specifications

Product Usage Instructions

1. Installation

2. Compatibility

3. Power Consumption

4. Display Settings

Frequently Asked Questions (FAQ)

Q: What is the operating temperature range for the display
module?

Q: How many pixels does the display resolution consist of?

Documents / Resources

References

Leave a comment

Cancel reply