SUPVAN E10 Bluetooth Label Maker Machine User Guide
KATASYMBOL
E10
Checklist
Install the Label Tape
The Printer
Connect to Printer via App
*If asked for permission, please allow the App to access the location information of the smart phone (Android only). Otherwise the Bluetooth connection will not function.
Use Templates or Customize with App
Print & Cut
After inserting or replacing a new roll of label, click the printer’s power button to print a blank label to let the print head identify the label position.
*You may double-click the power button to retract the blank label paper.
FAQ
(1) Please ensure that the printer is turned on and the Bluetooth of the smartphone is turned on.
(2) Check if the location function is enabled on the smartphone (Android only). In the Android system, location permission must be enabled when the App is being used. If turned off, you can find “Katasymbol” in “Settings – Application – Permission Management – Application” and turn on the location permission. You don’t need to do this on iOS phones.
(3) Please launch the Bluetooth connection within the App. Click “Add Printer” to search for the device. In the search list, click the corresponding printer model name to connect successfully.
(4) Check if the printer is being connected to other devices. This printer cannot be linked to more than one smartphone at the same time.
(5) If none of the above solves the problem, please contact Support through the App or via other ways.
(1) If the RFID sticker of the label tape is torn off, the device cannot identify the label paper type. “Incorrect label tape” will show when printing.
(2) If the printed paper shows no text or image, the label may be installed upside down. Reinstall the label roll.
(3) Please check whether Dark Theme/Mode is enabled. The latest version of the App can support it.
(1) Double-click the power button to retract the unused label papers.
(2) If label has been removed, it cannot be retracted.
(1) When inserting or replacing a roll of label paper for the first time, a blank label should be printed by clicking the power button. This is to let the print head identify the position of the label paper.
(2) Check if the correct template that matches the label paper has been selected in the App. Check the size and image on the label packaging, select the matching template on the App.
(3) Please make sure to put the label printing side up into the printer. If placed on the opposite side, it cannot be printed.
(1) Make sure there is enough battery. If the indicator light shows red, the battery is low. Charge the printer for at least half an hour before use.
(2) The print head may be dirty or sticky. Please refer to Question 8 for cleaning.
(3) Increase the printing concentration.
(1) See if there is dirt on the cutter.
(2) If the cutter is sticky, use cotton swabs to clean the excessive glue.
The App automatically adjusts the font size according to the size of the label paper, try switch to continuous labels, or use line breaks.
(1) Use ethanol and cotton swabs.
(2) Turn off the printer and let it cool for a few seconds.
(3) Take the paper roll out and put it aside.
(4) Use a clean small cotton swab (the print head space is narrow) to dip a little ethanol to wipe the dirt on the surface of the print head gently (do not scrape the print head with hard objects, otherwise the thermal-sensitive tablet will be permanently damaged and become irreparable).
(5) After cleaning, double-click the power button to do a self-test when the surface is completely dry.
For more questions, please check “Instruction” inside the App or click “Support”.
SAFETY INFORMATION
- Use a single power socket instead of multiple sockets that have been plugged in by multiple devices, as this may cause fire or electric shock.
- Do not let metal or liquid enter the device. Otherwise, fire or electric shock may occur, and internal parts may be damaged, resulting in device damage.
- Do not use AC power exceeding 100-240V.
- It is strictly forbidden to disassemble or modify the label machine without authorization, which may cause fire or electric shock caused by high voltage parts.
- Please keep the label printer away from alcohol, gasoline, and other flammable solvents and fire sources to avoid deflagration and fire.
- Use wrung-out wet gauze to clean the device. Do not use flammable organic solvents.
- Please use the label printer in a clean place. Do not use it on carpets or blankets, otherwise, a large amount of dust will quickly cause a short circuit.
- This printer has a cutter, please be careful when using it to avoid injuries.
- Please use SUPVAN’s original label paper and do not remove the sticker on the label paper, otherwise, the device cannot identify the type of the label paper and cannot print it.
- If the use of non-original label paper causes equipment damage, we will not be responsible for the warranty.
- Do not touch the print head with your hands. It may cause skin burns when the device is finishing working.
- Do not put heavy-weight items on the printer.
- Keep the printer away from electromagnetic interference sources that generate magnetic fields.
- When using the device, do not block the label paper exit. Otherwise, the printout may not be smooth.
- When using the device, do not pull the whole label roll out of the exit. Please cut off the label paper first and then take it out. Otherwise, the printing quality and the device will be damaged.
- The printer is delicate. Please put it on a flat place, to avoid damages.
- The device and label paper should be stored in a dry, ventilated place with no direct sunlight at room temperature.
- In case anything gets inside the device, please stop using it immediately to avoid damaging it.
- If you find any peculiar smell or abnormal sound when using the device, immediately turn off the label printer and contact the seller.
Warranty
- Whole device warranty for 2 years.
- Subject to the date of the sales on the company’s record.
- The warranty period for the replacement of spare parts after free maintenance is subject to the warranty period of the whole device.
- For consumables, we do not provide a warranty. If there is a quality problem, the products can be replaced free of charge.
Disclaimer
- The use of non–SUPVAN factory products.
- Dismantling, repairing, or refitting a product without the authorization of the manufacturer.
- Fault caused by abnormal voltage or improper operating environment.
- Damage caused by fall, crush, immersion in liquid, dampness, or other causes.
Product Specifications
Printing Method Thermal printing
Printing Speed 20-40 mm/s
Printing Resolution 203 dpi
Print Width 12 mm
Label Width 12-15 mm
Type of Label Paper Thermal paper
Connection Bluetooth
Battery Capacity 1200 mAh
App Languages English, Čeština, Deutsch, Español, Français, Italiano, Nederlands, Português, Pусский, 日本語, 한국어, ภาษาไทย, Tiếng Việt, Türkçe, Bahasa Indonesia, ةيبرعل
Size 130 x 78 x 28 mm (W x D x H)
Weight 200 g
Operating System App compatible with iOS & Android
Available Labels
*Find more label tapes on katasymbol.com or search on Amazon
Support
Documents / Resources
 | E10 Bluetooth Label Maker Machine |
References
- Label Makers & Printers | SUPVAN®katasymbol.com
- User Manualmanual.tools
I do not want the e10 to auto print the date. How do I turn this off? It auto print when the printer is turned on and off. This waste so much tape
How do I disable the automatic date printing on the SUPVAN E10 label maker?
Based on the SUPVAN E10 user guide, the printer is designed to print a blank label when turned on or after replacing a roll to help the print head identify the label position. If your device is specifically printing a date, this is likely a setting within the Katasymbol App rather than a hardware default.
To address this and reduce tape waste, please try the following:
If the issue persists, you can access further technical assistance by clicking "Support" or "Instruction" directly inside the Katasymbol App.
Read the full Q&A page
the app has no manual?? I cant make the label long it short.
How do I adjust the label length in the Katasymbol app for the SUPVAN E10?
To adjust the length of your labels and find more detailed guidance within the app, please follow these steps:
If you have just changed your label roll, remember to single-click the power button on the printer to let the device identify the label position correctly.
Read the full Q&A page