Supersonic-logoSupersonic SC-1578BT Bluetooth Portable Speaker 

Supersonic-SC-1578BT-IQSound-Portable-Speaker-Product

Specification

  • Speaker Unit: 8 Inches
  • Power: 9W
  • Frequency: 40Hz – 20KHz
  • S/N Ratio: 78dB ± 3dB
  • Voltage: DC 5V
  • Battery: 7V/1500mAh

UNPACKING

  • Speaker Unit: x1
  • USB Cable: x1
  • Strap: x1

Security Instructions

  1. Please read all safety instruction warnings carefully before using this product. Improper use of this product may result in damage to this or attached products.
  2. Conditions near a heater or high-temperature service.
  3. Never dismantle the product. Doing so will nullify the warranty clause.
  4. Avoid dropping your SC-1578BT unit or subjecting it to excessive shock and vibrations as this may cause it to malfunction.
  5. DO NOT use any sharp object to operate your unit’stouch-screen display.
    Excessive force could damage the display.
  6. Never dismantle the product without due permission,otherwise it may nullify the warranty clause.

PANEL FUNCTIONSupersonic-SC-1578BT-IQSound-Portable-Speaker-fig-1

  1.  MODE
  2. PREVIOUS
  3. PLAY/PAUSE
  4. NEXT
  5. VOLUME POWER
  6. VoL
  7. ECHO
  8. MIC INPUT
  9. AUX INPUT
  10. LED DISPLAY
  11. DC 5V
  12. CHARGE LIGHT

FUNCTION DESCRIPTION

POWER AND BATTERY

  1. Speaker output power 9W
  2. The rechargeable battery is integrated into the speaker
  3. Lithium battery 3.7V/1500mAh
  4. Charging by an adapter with output voltage DC 5V via USB cable.
  5. LED light is RED once connecting to power source
  6. LED light is OFF once the battery is full.
  7. Full charge takes about 2-3 hours.

MODE CONTROL

  1. Switch power on, insert USB/SD Card, and Speaker play by USB/SD Card mode.
  2. Switch power on, press “MODE” to choose a function and play songs.
  3. Press or to select previous or next track, pressSupersonic-SC-1578BT-IQSound-Portable-Speaker-fig-5 to play or pause.
  4. Switch power on, and press “MODE” to change to FM mode.
  5. Press Supersonic-SC-1578BT-IQSound-Portable-Speaker-fig-5to automatically scan FM channel.
  6. Press or to select previous or next channel.
  7. USB version:0, Format Version: FAT32, USB size: up to 32GB

BLUETOOTH CONNECTION

  1. Press the “MODE” button to display “blue” on the screen to start the Bluetooth connection
  2. The speaker is ready for pairing with a mobile device.
  3. Scan the bluetooth name “SC-1578BT” and pair via Bluetooth
  4. After paired, the volume and tracks could be controlled by both speaker”s control panel and the paired mobile device.

AUDIO INPUT & OUTPUT

  1. Disconnect USB and SD Card, Press the “MODE” button to show “LINE”.
  2. Insert the audio cable into Aux input to connect the external audio resources.
  3. Insert the Wired Microphone into Mic Input connect externa audio resource.

Important Notes

  1. Do not use the machine while charging.This may cause batery damage.
  2. To save battery power, turn off speaker lights when not in-use.
  3. Please keep machine away from water and moisture.
  4. Do not open the machine or remove the back panel. This machine carries high voltage and could be very dangerous.
  5. In case of service needed, please call a certfied technician or our customer service department, Do not atempt to fix yourself.

TROUBLESHOOTINGSupersonic-SC-1578BT-IQSound-Portable-Speaker-fig-2

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FAQs

How do Bluetooth speakers made by Supersonic pair?

Once you find the Bluetooth device and select the connection after hearing the Bluetooth Mode warning tone, you can begin playing music from your phone.

How can I determine when the Supersonic Bluetooth speaker’s battery is fully charged?

A row of LED lights around the front of your speaker turn on and remain lit while charging when it is plugged in.

Is it acceptable to use a Supersonic Bluetooth speaker while it is charging?

While your Bluetooth speaker is charging, you can use it without endangering the battery. Before using the speaker for the first time, fully charge it while it is off to assess the battery life.

What is the battery life of Supersonic Bluetooth speakers?

When completely charged, a brand-new Bluetooth speaker has a battery life of 10 to 20 hours. Some gadgets can only run for four hours on a charge, but others can last up to 24. The size of the battery varies.

How long should I let my Supersonic Bluetooth speaker charge up initially?

Before using the headset for the first time, it must charge for at least 30 minutes. If the headset is left in the charger after being fully charged, it won’t get damaged.

How can I recharge my Supersonic speaker without a charger?

Charge your mobile devices with a laptop, a power bank, a portable charger, a smartphone, or another mobile device.

How can I extend the battery life of my Supersonic Bluetooth speaker?

Your finest options are a portable power source and the fastest charging rates. A shorter battery life can be compensated for by fast charging. Not all speakers have this capability, but it is still quite helpful because it can revive a dead battery for a sufficient amount of time in just a half-hour or less.

How can I stop my Supersonic Bluetooth speaker from turning off automatically?

Next, select Properties by right-clicking on your Bluetooth device in the Device Manager box. 3. Uncheck the box next to Allow the computer to turn off this device to save energy in the Properties window’s Power Management tab.

Can you replace the battery in a Supersonic Bluetooth speaker?

Examine the screws and other fasteners holding the battery in place with great care. To remove the battery, use a screwdriver that is the appropriate size and form. The bottom or back of Bluetooth speakers are often where you’ll find the batteries. After removing the screws holding the battery in place, carefully remove the battery.

How long does it take to fully charge a new Supersonic Bluetooth speaker?

The Bluetooth® speaker’s internal battery needs three (3) hours to fully recharge from a dead battery.

How are Supersonic Bluetooth speakers to be taken care of?

The most crucial thing to keep in mind is not to wipe your portable Bluetooth speaker with water. Liquids entering the wireless Bluetooth speaker’s interior could harm its internal components. Just a towel will do.

Can I charge my Supersonic Bluetooth speaker using a mobile charger?

To charge your wireless speaker, use the USB AC adaptor that was shipped with your iPhone® or iPad® mobile device. Whether it takes ten hours or more to fully charge the drained battery will depend on the features of the AC adapter.

Are USB-compatible Supersonic Bluetooth speakers available?

The USB ports on different Bluetooth speakers vary. Micro USB ports are used to charge older portable Bluetooth speakers. Due of its speed, some people have switched it out for a USB Type-C charging port.

How are the Supersonic wireless speakers powered?

The majority of wireless speakers connect to standard power outlets or power strips using AC adapters. Some systems include rechargeable batteries to achieve “truly wireless” operation, although this feature necessitates continuous repositioning and charging in order to run this form of surround sound system.

Have there ever been battery-powered Supersonic Bluetooth speakers?

Lithium-ion batteries are most frequently utilized in gadgets like Bluetooth speakers because they combine dependability, safety, and efficiency. They can also supply the power required to play audio for a number of hours on a single charge.

References

Leave a comment

Your email address will not be published. Required fields are marked *