DMX512 0-10V/PWM Dimmer
70060016
Important: Read All Instructions Prior to Installation
Function introduction
Product Data
| Input Voltage | Input Current | Output Power | Output Current | Size(LxWxH) |
| 100-240VAC | 60mA max | 2x(0-5VDC)/2x(0-10VDC)/2x(0-15VDC) | 20mA max | 170x59x29mm |
- Receives DMX512 signal, 2 channels 0-5V/0-10V/0-15V signal output
- Compatible with different DMX512 controls
- To dim and switch Single color LED lighting.
- Waterproof grade: IP20
Safety & Warnings
- DO NOT install with power applied to device.
- DO NOT expose the device to moisture.
Operation
Set DMX address
Press and hold down 1st button for 2 seconds, digital display flashes to set the required DMX address, then press and hold down any button for >2 seconds to confirm.
Through buttons to set desired DMX512 address, button 1 is to set “hundreds” position, 2 is to set “tens” position, 3 is to set “unit” position.
Choose DMX Channel
Press and hold down 2nd and 3rd buttons simultaneously for 2 seconds, cH digital display flashes, then click 1st button to choose 1/2, 1 means total 1 channel, 2 means total 2 channels. Press and hold down any button for >2 seconds to confirm the 1 or 2 channels. The factory default is 2 channels.
NOTE:
For example, when we set address to 001.
When select 1cH, all two output channels will be the same address 001 and controlled simultaneously.
When select 2cH, the two output channels will be address 001, 002 respectively and controlled separately.
Wiring Diagram
Product Dimension
Documents / Resources
 | SuperlightingLED SR-2102 2 CH Dimmable DMX to 0-10V or PWM Signal Converter [pdf] Instructions SR-2102, SR-2102 2 CH Dimmable DMX to 0-10V or PWM Signal Converter, SR-2102, 2 CH Dimmable DMX to 0-10V or PWM Signal Converter, DMX to 0-10V or PWM Signal Converter, 0-10V or PWM Signal Converter, PWM Signal Converter, Signal Converter, Converter |
