SUPERLIGHTINGLED logo

LED Flexible Pixel Screen

User Manual

To optimize user experience, please install and use the light according to the following instruction.

Caution 18 Warning

(1) Please check if the light and the parts are intact before installation.
(2) Make sure to cut off power before installation.
(3) Please do not place this light in corrosive conditions.
(4) If there is any damage to the cord, please cut off the power and stop using it immediately.
(5) Wrong connection may lead to the kit getting damaged. The warranty range excludes the damage caused by wrong connection.
(6) To ensure the light works properly, please use the voltage indicated on the packing.
(7) To avoid any damage to the light, please do not use chemical solvent during routine maintenance.

1.Product Parameter
Model

MF-H0330

MF-H0340

MF-H0350

Power

Max:16W

Max:51.2W

Max:51.2W

Size

80x80mm

320x80mm

160x160mm

LED QTY

64PCS

256PCS

256PCS

Color

RGB

Input Voltage

DC5V

IC Type

WS2812B Built-in IC

LED Spacing

10mm

LED Type

SMD5050

Life

50000H

Protection Rating

IP20

Working Temperature

-20~45°C

2.Specifications

SUPERLIGHTINGLED MF-H0330 LED Flexible LED Pixel Screen Panels - a1MF-H0330

SUPERLIGHTINGLED MF-H0330 LED Flexible LED Pixel Screen Panels - a2MF-H0350

MF-H0340 SUPERLIGHTINGLED MF-H0330 LED Flexible LED Pixel Screen Panels - a4

  1. Signal IN
  2. Supplementary wire
  3. Signal OUT

Remark:

  1. The product is designed as independent modules, and different sizes can be used together. A single module cannot be cut.
  2. The LED has a built-in WS2812B IC, and the data protocol uses a single-wire return-to-zero serial communication method. The red dashed line in the diagram above represents the signal transmission sequence, where DIN is the signal input, and DOUT is the signal output. The signal input and output cannot be connected in reverse, otherwise, the LED will not work, and incorrect wiring may cause product damage!
3.Installation

SUPERLIGHTINGLED MF-H0330 LED Flexible LED Pixel Screen Panels - b1

Tips:

  1. Please use the correct installation way.
  2. This product does not include power supply and controller; please match them according to the actual application on requirements.
  3. To ensure product brightness and stability, it is necessary to connect the supplementary power supply.
  4. Adopt suitable power supply to match the LED Flexible Pixel Screen. Power is 20% bigger than Max, Power of the LED Flexible Pixel Screen to ensure the long me performance of power supply.
  5. When multiple power supplies are required, it is recommended to disconnect the red wire of the SM-connector to prevent the forma on of a loop between the two power supplies, which can result in a convection phenomenon and damage the power supplies.
  6. Please do not stare at the light for a long me when it is working to protect your eyes.

Manufacturer: Super Lighting LED

https://www.superlightingled.com/

Made in China

Documents / Resources

SUPERLIGHTINGLED MF-H0330 LED Flexible LED Pixel Screen Panels [pdf] User Manual
MF-H0330, MF-H0340, MF-H0350, MF-H0330 LED Flexible LED Pixel Screen Panels, LED Flexible LED Pixel Screen Panels, Flexible LED Pixel Screen Panels, LED Pixel Screen Panels, Screen Panels, Panels

References

Leave a comment

Your email address will not be published. Required fields are marked *