D Series LED Headlight Conversion Kit with Internal Driver
“
Product Specifications
- Product Name: D Series LED Headlight Conversion Kit with
Internal Driver - Model: D1S, D3S, D5S, D2S, D4S
- Rev Date: V1 01/17/2025
Product Usage Instructions
Installation Steps:
- Remove the old HID bulb from the housing.
- Secure the new LED bulb into the housing.
- Connect the bulb to ballast/power and check beam
alignment.
Frequently Asked Questions (FAQ)
Q: What should I do if the LED bulb is not lighting up after
installation?
A: If the LED bulb is not lighting up after installation, please
ensure that the connections are secure. Check the power source and
make sure it is providing the correct voltage. If the issue
persists, contact customer support for further assistance.
Q: Can I install this conversion kit on any vehicle?
A: The D Series LED Headlight Conversion Kit is designed for
specific bulb types (D1S, D3S, D5S, D2S, D4S). Please check your
vehicle’s compatibility before installation to ensure proper
fitment and functionality.
“`
User Manual
D Series
LED Headlight Conversion Kit with Internal Driver
Warranty
A 5-year warranty is given from the date of purchase to the original purchaser on halogen replacement bulbs. Warranty is for replacement and covers manufacturing faults only. Labor costs are not covered by warranty. Any damage caused from improper installation, physical damage, or connecting to voltages other than 1224 VDC (halogen replacements) or an OEM ballast (HID replacements) will not be covered.
Safety and Notes
· Product should be installed by a qualified technician where possible. · LED bulb replacements are only water-resistant when used in an
enclosed bulb housing assembly. Do not expose the chip side of the light to water directly or submerse the bulbs. · Adequate ventilation is necessary for good heat dissipation, which will prolong the lifespan of the bulbs. · Check voltage of the vehicle to be sure it complies with the operating voltage of this product (1224 VDC for halogen replacements). · Ensure all wire connections and polarities are correct before applying power to avoid damage to the bulbs. · If a fault occurs, contact Super Bright LEDs to initiate a return. Do not attempt to repair this product by yourself. · For HID replacement bulbs, ensure the existing ballast is working and still installed properly as it is required for operation. Note: These bulbs will not work with Marelli Automotive Lighting part numbers 1 307 329 153 and 1 307 329 115 (as well as any numbers these supersede). · Intended for off-road and fog light applications.
Rev Date: V1 01/17/2025
Rev Date: V1 01/17/2025
Installation 1. Remove the old HID bulb from the housing
2. Secure the new LED bulb into the housing.
3. Connect the bulb to ballast/power and check beam alignment.
D1S, D3S, D5S
D2S, D4S
Rev Date: V1 01/17/2025
Rev Date: V1 01/17/2025
Documents / Resources
 |
superbrightleds D Series LED Headlight Conversion Kit with Internal Driver [pdf] User Manual D1S, D3S, D5S, D Series LED Headlight Conversion Kit with Internal Driver, D Series, LED Headlight Conversion Kit with Internal Driver, Conversion Kit with Internal Driver, Kit with Internal Driver, Internal Driver |