Super Bright LEDs DMSTRB-A6 Round LED Vehicle Strobe Light
Product Usage Instructions
- Surface strobe can be mounted with the included bracket or flush mounted in a 0.90″ (22.8mm) hole with the included rubber gasket.
- This light head can be synchronized with others of the same family of light heads.
- To sync, ensure the lights are on the same pattern to start.
- Connecting the white wire to the power for one second will select the next flash pattern.
- Lights will return to the last pattern selected when power is cycled.
Important Notes
- Before making any connections to the automotive wiring, always disconnect the battery negative terminal.
Included Parts
- 1- Round LED Vehicle Strobe Light
- 1- Mounting Bracket with Rubber Gasket
- 2- Mounting Screws
- 1 – Locking Screw
- 2- Mounting Screw washer
- 2 – Nuts
Accessories
- Switch Kit (SWK-PM)
- Fuse Holder (WMFH)
- Fuse (MAF-x)
Wiring
- Red – Power In(+)
- Black – Ground In (-)
- White – Pattern Select (Momentary +)
- – or –
- Set to Sync (Constant +)
- Green – Sync Control
Installation
- Surface strobe can be mounted with the included bracket or flush mounted in a (0.90”, 22.8mm) hole with the included rubber gasket.
Operation
- This light head can be synchronized with others of the same family of light heads.
- In order to sync, the lights should be on the same pattern to start.
- Connecting the white wire to the power for one second will select the next flash pattern. Lights will return to the last pattern selected when power is cycled.
Warning: Before making any connections to the automotive wiring, always disconnect the battery negative terminal
Dimensional Drawings
Specifications
| DMSTRB-x | |
| Voltage | 12~24 VDC |
| Current Typical | .25A @ 12 VDC / .13A @ 24 VDC |
| Average Power | 6 Watts |
| IP Rating | Waterproof IP67 |
| Mounting Type | Surface Mount / Flush |
| Number of LEDs | 4 |
| Wire Length | 8in (20.3cm) |
| Housing Material | Painted Aluminum |
| Lens Material | Polycarbonate |
| Recommended Fuse Rating | 2A/Light Head |
| Operating Temperature | -22 ºF ~ 185 ºF (-30 ºC ~ 85 ºC) |
| Weight | 3.2 oz (90 g) |
| Certification | SAE J595 Class1 |
| Warranty | Lifetime |
Single Color Flash Patterns
WARNING
- Do not look directly into LEDs while in operation; it may cause momentary blindness and/or eye damage.
Wiring Diagram
- Black Wire: Ground or -VDC
- Green Wire: Synchronized Wire
- Red Wire: Power or +VDC
- White Wire: Flash Functions
WARNING
- Do not look directly into LEDs while in operation; it may cause momentary blindness and/or eye damage
CONTACT
- Rev Date: V2 04/11/2025
- 4400 Earth City Expy, St. Louis, MO 63045 866.590.3533 superbrightleds.com
FAQ
- Q: Can I sync multiple light heads together?
- A: Yes, this light head can be synchronized with others of the same family of light heads.
- Q: How do I change the flash pattern of the light head?
- A: Connecting the white wire to the power for one second will select the next flash pattern.
- Q: What is the recommended fuse rating for this product?
- A: The recommended fuse rating is not specified in the manual, but it is recommended to use a fuse holder and fuse for safety.
Documents / Resources
 |
Super Bright LEDs DMSTRB-A6 Round LED Vehicle Strobe Light [pdf] User Manual DMSTRB-A6, DMSTRB-AW6, DMSTRB-R6, DMSTRB-RB6, DMSTRB-A6 Round LED Vehicle Strobe Light, DMSTRB-A6, Round LED Vehicle Strobe Light, Vehicle Strobe Light, Strobe Light, Light |