Multi-Device Mechanical Keyboard
SI-2183
User Manual
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FOC 1 D 2BBYS- 8 -2183
Product parameters
Operating Voltage: DC 3.7 -4.2V
Number of Keys: 87(US) 88 (EU) Keys
Keyboard Size: 367.7°136.135.9mm
Working Current: < 95mA
Product Weight: 905 + 2
Key Life: 50 million times
Package Contents
1xMulti-Device Mechanical Keyboard
1x User Manual
1x Keycap Puller
1x USB-C Cable
1x USB Receiver
Compatible System
Windows XP / Vista /7 /8110 /11, Linux and Limited Mac OS keyboard support.
Product View
- Indicator light (Caps Lock / Scroll Lock / Win Lock)
- Foot pad
- Folding tripod – (6/8/12 three angles)
- Receiver – Please take out the receiver from here and plug it into the computer
- ONIOFF switch
Device Connection
2.4G wireless connection mode
Fn+ =, short press at the same time for 1 second, this will cause the light on the button to flash slowly. Now is the moment to insert the receiver, followed by a2 second wait and then turn off when the connection s successful. If the connection is not successful, try anew receiver. Press and hold for 3 seconds. The light on the button will flash quickly to enter the pairing mode, insert the receiver, keep on for 2seconds and then turn off, the connection is successful
Bluetooth connection mode.
Fn+1, press and hold down at the same time untilthe light on the button flashes.
The device will be searching for KB-3.0″or KB-5.0’to connect with. The light will be on for 2 seconds and then goes out. This means the 1# The bluetooth device is successfully connected. Follow the same steps, long press FN +2/3 connect 2# and 3# devices When the three devices are successfully connected, short press (Fn+ 1) for 1 second. The light on the button will start to flash slowly. Then turn on and off for 2seconds and switch to device 14 Following the same steps, short press Fn+2 or 3, appropriately switching to device 2 # or 3#.
Wired connection mode
Fn+ 4, short press to enter the wired mode. The light on the key will be on for 2 seconds, then turn of, this means the wired connection s successful
Shortcut Keys and Functions
- 4 systems (Android/Windows/Mac/i0S) share key combination:
Fn + Esc Reset Fn + -. 2.4G mode Fn + 1! Bluetooth device 1# Fn + 2@ Bluetooth device 2# Fn + 3# Bluetooth device 3# Fn + 4$ Wired Mode Fn +Q Switch to Android System Fn + W Switch to Windows System En + E Switch to Mac System Fn + R Switch to iOS system Fn + INS Light effect switching -18 types Fn + ↑ Brightness + En + ↓ Light Brightness- Fn + ← Light Speed – Fn +→ Light speed+ Fn + Win-L Win lock Fn + Alt_R Side light brightness adjustment Fn + App Side light mode switch Fn + CtrI_R Side light speed adjustment Fn + 6-0 Custom backlight Fn + Home Custom backlit recording, storage keys Fn + Del Under the same light mode, the light color can be switched, 8 different options - MAC system shortcut key: press Fn + E key at the same time until the red light on the E key flashes times. Switch to the Mac system.
- Shortcut keys for i0S system: press Fn + R keys at the same time until the red light on the Rkey flashes 3 times. Switch to Win system.
- Android system shortcut key: Press F + Q key at the same time until the red light on the Q key flashes 3 times, switch to the Android system
Three systems (Android/Mac/iOS) share key combination:Fl F2 F3 F4 F5 F6 Screen
Brightness –Screen
Brightness+App
switchingReturn to desktop Keyboard Brightness- Keyboard
Brightness +F7 F8 F9 F10 Fll F12 Previous
Pieceplay I Pause Next track Mute Volume- Volume- Note: (1) The multimedia keys are all set on default settings. If you want to enable F1~F12 function keys (such as help, etc.) ina Mac/Android/ioS operating system, you can press Fn + F1~F12 function Key simultaneously, or press Fn + Ctrl-L to activate them. Press Fn + Ctrl-L again to restore the keyboard to its default settings.
- Windows system shortcut key: Press Fn + W key at the same time until the red light on the W key fiashes 3 times, switch to the Windows system.
| Fn + El | Home page | Fn + F2 | Fn + F3 | App switching | |
| En + E4 | Open explorer | Fn + F5 | Keyboard Brightness – | Fn + F6 | Keyboard Brightness + |
| Fn + F7 | Previous piece | Fn + F8 | Play / Pause | Fn + F9 | Next track |
| Fn + F10 | Mute | Fn + Ell | Volume- | Fn + F12 | Volume+ |
Notes (1. The F1- FI2 function keys are all set in default settings. If you want to enable multimedia keys (such as Music player, Play/ Pause, etc.) ina Windows operating system, you can press Fn+F1~F12 Multimedia Key simultaneously or press Fn + Ctrl-L to activate them. Press Fn + Ctrl-L again to restore the keyboard tots default settings.
2 The computer (notebook) input language must be the same as the layout of the keyboard
Power Saving Mode
When you aren’t using the Keyboard, it will go to sleep in order to conserve battery power. All backlights will be turned off. Press any button and wait for 3 seconds to reactivate it. I you won’t be using your keyboard for an extended period of time, tur it off to conserve even more power.
Power Steps
When the voltage is lower than 3.3V, the Fn key will flash red to indicate low power indicating that the voltage is lower than 3,0. It will enter shutdown mode when the battery runs out. Use the included USB cable for charging. Connect one end to a USB charger, and the other to the keyboard. * Note: USB charger s not included. Whilst charging, the Fn key indicator will turn red. The indicator red light turns off once fully charged
Generally, it takes approximately 5 hours to reach a full charge. Output: DC 5V/ 450mA.
Product Features and Product Performance
- (Fn-+Ins, allows one to switch between 17 RGB lighting effects and turn off the lighting effects
- The software has music matched RGB lighting effects. There are 10 lighting effect modes to choose from.
- Each key has a software custom function and macro definition. The driver can customize more than 16 million colors.
- Fn + Esc, press these keys and hold for 5 seconds to restore to the default settings. I you restore the factory default lighting mode the original connected bluetooth device will not be cleared.
- Fn+↑/ ↓, this allows you to adjust the brightness increase/decrease (five levels
of brightness adjustment). - Fn+ ←/→, this controls the light speed to slow down/speed up.
- Fn+ Del, allows one to switch the color of the lighting effect
- Fn + Win_L this locks/opens Win window key (only FN + Win-L under the Windows
system can lock Win). - FN+
. this operates the side LED light effect switching. A total of 19 side light modes are on offer + off. FN + Alt_R adjusts the brightness of the side lights There are 4 levels + turning off the lights. FN + Ctr_R can be used to adjust the speed of the side lights, a total of 3 gears are on offer. - Lighting macro preset and recording function
a).Fn+ 6 is the factory default game mode 1# WSADCQEZ, Shift-L, Tab, Ctrl-L. TBMVF, Alt-L. Number keys 1-5 are red
b).Fn+7 s the factory default game mode 2# QWERDF number keys, 1-6 8, ASMCGY, Space, HTab bright orange
c).Fn+ 8isthe factory default game mode 3# WASDERQ number keys 1-4 Shift-L Ctri-L Space Tab Enter Home End PGUP PGDN F1 bright blue light
d). Fn+ 9 Factory default game mode 4# WSADCQEZ Shift-L Tab Ctrl-L TBMVF Alt-L Number keys 1-5 Bright blue light
e).Fn+ 0l the factory default game mode 5# QWERDF number keys 1-6 8 ASMCGY Space H Tab green light
f).Fn+ 6o enter custom lighting effects. Then press Fn + Home to enter light recording (Caps Lock and other 3 indicators will flash). Use the corresponding button switches to the corresponding color to turn on or tur off the light and Use Fn+ Home to save after recording. Fn + 7/8/9/0s the same as Fn + 6 recording mode.
You can also use the software to customize the lighting of each button
Important Safeguards and Precautions
- SAVE THESE INSTRUCTIONS-They contain essential safety and operating instructions.
- This product is for indoor use only. Do not expose the keyboard to direct sunlight or wet conditions.
- Do not use the keyboard if equipment is damaged.
- Do not disassemble the product. Disassembly can result n safety hazards.
- D0 not throw or shake the product.
FCC STATEMENT :
‘This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are. designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no quarantine that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Made in China
Documents / Resources
 |
suoai SI-2183 Multi Device Mechanical Keyboard [pdf] User Manual 2BBY9-SI-2183, 2BBY9SI2183, si 2183, SI-2183, Multi Device Mechanical Keyboard, SI-2183 Multi Device Mechanical Keyboard, Mechanical Keyboard, Keyboard |