SUNRICHER SR-SBP2801K4-BLE Kinetic Push Button Switch Owner’s Manual

SR-SBP2801K4-BLE Kinetic Push Button Switch

“

Specifications:

• Protocol: BLE
• Power Supply: Kinetic Push Button
• Transmission Frequency: 2.4GHz
• Transmission Range (free field): Min. 30m
• Protection Type: IP20
• Dimming Range: 0.1% – 100%
• Dimensions: 80.5 x 80.5 x 14.7mm

Product Information:

Front side:

1. Click to turn on, Press and hold down to increase light
   intensity.
2. CW button: Click to recall the scene, press and hold to
   increase cool white.

Back side:

2. Click to turn off, Press and hold down to decrease light
   intensity.
3. WW button: Click to recall the scene, press and hold to
   increase warm white.
4. The remote control can be fixed on the wall with 3M glue or
   screw.

NOTE: In order for switches to operate as
described above, our BLE Switch Module should be mounted, and
please make sure the I label is placed above the O label.

Product Usage Instructions:

1. To turn on the light:
   • Click the front side of the switch.
   • Press and hold down to increase light intensity.
2. To turn off the light:
   • Click the back side of the switch.
   • Press and hold down to decrease light intensity.
3. To adjust color temperature:
   • CW button: Click to recall the scene, press and hold to
     increase cool white.
   • WW button: Click to recall the scene, press and hold to
     increase warm white.

FAQ:

Q: How do I mount the BLE Switch Module?

A: The BLE Switch Module should be securely mounted following
the provided installation instructions.

Q: What is the range of the remote control?

A: The remote control has a range of approximately 30 meters in
free field conditions.

“`

WorkwithSunsmart
BLEKineticPushButtonSwitch SR-SBP2801K4-BLE

Features
· CCTwallremotebasedonBluetooth®Meshnetwork. · Self-poweredwallremote,nobatteryreplacement&
re-installationcosts · Nowires,nobatteries,nolimits · Ultralonglifetime,morethan1milliontimespushing. · Easy&quickpairingthroughAPP · Meshnetworkforfurthercontroldistance,receiverscan
transmitsignaltoeachother · 2.4GHzglobaloperation · Transmissionrangebetweeneverytwoneighbor
devicesupto30m · Standardsize,compatiblewithexistingEUsizeframe. · WorkingwithourBLEdriver,controller,signal
converter,sensorseriesproduct · On-boardantenna · Waterproofgrade:IP20 · 5yearswarranty

IC

Parameters

Protocol Power Supply Transmission Frequency Transmission Range(free field) Protection Type Dimming Range Dimensions

Productinfo

Front side

1

3

Bluetooth® mesh Self powered by built-in nano generator
2.4GHz Min.30m
IP20 0.1%-100% 80.5×80.5×14.7mm
Back side

80.5 mm

2

4

5

80.5 mm

14.7 mm

Clicktoturnon,Pressandholddowntoincreaselightintensity.
Clicktoturnoff,Pressandholddowntodecreaselightintensity.
CWbutton:clicktorecallthescene,pressandholdtoincreasecool
white.
WWbutton:clicktorecallthescene,pressandholdtoincreasewarm
white.
Theremotecontrolcanbefixedonthewallwith3Mglueorscrew.
NOTE:Inorderforswitchestooperateasdescribedabove,ourBLESwitch Moduleshouldbemounted,andpleasemakesurethe”I”labelisplaced abovethe”O”label.

BLEKineticPushButtonSwitch SR-SBP2801K4-BLE Installation
BLESwitchModule

WorkwithSunsmart

IC

Warning · DONOTexposethedevicetomoisture.

Operation

· Kindlyrefer” SunsmartCommissioningUserManual”forfurtherpairing, grouping,scenesettings.
· Kindlyrefer” SunsmartKineticSwitchKeypadUserManual”togofurther pairing,grouping,scenesettings.

Application

BLEFixture-IntergratedSensorController

Luminaries

Dimmer Wallstation

Kinetic switch

SunsmartCommissioningTools

UpdateLog

Date 2024-12-19

Version Update Content V1.0 Initialrelease

Update by Jesse

Subject to change without notice. Please contact us if you have any questions.

Documents / Resources

SUNRICHER SR-SBP2801K4-BLE Kinetic Push Button Switch [pdf] Owner's Manual SR-SBP2801K4-BLE, SR-SBP2801K4-BLE Kinetic Push Button Switch, SR-SBP2801K4-BLE, Kinetic Push Button Switch, Push Button Switch, Button Switch

References

• User Manual