Sunricher 09.2402K2D.04758 Push Button Single Color Dali Controller
Product Information
Specifications
- Product Name: Push Button Single Color DALI Controller
- Model Number: 09.2402K2D.04758
- Output: DALI signal
- Power Supply: Supply By DALI Bus
- Operation Current: 30mA
- Operating temperature: -20°C to 50°C
- Relative humidity: 8% to 80%
- Dimensions: 80x80x26.6mm
Product Usage Instructions
Function introduction
Product Data
| Output | DALI signal |
| Power Supply | Supply By DALI Bus |
| Operation Current | 30mA |
| Operating temperature | 0-40°C |
| Relative humidity | 8% to 80% |
| Dimensions | 80x80x26.6mm |
- DALI DT6 push button controller
- Ultra slim and luxury design
- Material and finishing color can be customized
- With back lighting design, it’s easy to find even at night
- DALI bus powered, no extra power supply required
- Each channel DALI bus can install multiple controllers
- Enables the selection and control of 1 DALI group from a total of 16 DALI groups
- Easy installation with mounting bracket
- Waterproof grade: IP20
Wire Diagram
Installation
- Do wiring according to the connection diagram correctly.
- Set starting Group number via rotary switch on the back: (0-15 selectable)
Safety & Warnings
- DO NOT install with power applied to device.
- DO NOT expose the device to moisture.
Operation
1. Do wiring according to connection diagram correctly.
2. Set starting Group number via rotary switch on the back: (0-15 selectable)
- This DALI push button controller enables dimming commands to be sent to one Group of devices on the DALI circuit. A rotary switch on the back is used to select the DALI Group you would like to control and set the starting Group number, and a total of 16 Groups (0-15) can be selected.
- When the rotary switch arrow position is at 0, the controller controls all devices on the DALI circuit through broadcast.t
- When the rotary switch arrow position is at X except 0 (1-15), the controller controls DALI Group X-1.
- For example: Rotary switch arrow at 1, the controller controls DALI Group 0. Rotary switch arrow at 15, the controller controls DALI Group 14.
Rotate the switch to assign the controller to a specific DALI Group as per the following table:
| Rotary Switch Position | DALI Group Selected |
|---|---|
| 0 | Broadcast |
| 1-15 | 0-14 respectively |
Note: Assign devices on DALI circuit to a DALI group (0-15) with a DALI master controller first.
FAQs
Q: How do I set the starting Group number for the controller?
Use the rotary switch on the back to select a number from 0 to 15, corresponding to DALI Groups 0 to 14.
Q: What is the operating temperature range of the controller?
The operating temperature range is from -20°C to 50°C.
Q: How do I adjust the brightness using the controller?
Press and hold down the button to adjust the brightness of the selected group
Documents / Resources
 |
Sunricher 09.2402K2D.04758 Push Button Single Color Dali Controller [pdf] Instruction Manual SR-2422NK2-DIM-G1, 09.2402K2D.04758, 09.2402K2D.04758 Push Button Single Color Dali Controller, 09.2402K2D.04758, Push Button Single Color Dali Controller, Button Single Color Dali Controller, Single Color Dali Controller, Color Dali Controller, Dali Controller |