T3 Separate Monitor
Product Specifications:
- Mode: NFC
- Frequency Range: 13.56MHz (TX/RX)
- Power for EU: 21.33dBuV/m @ 10m
Product Usage Instructions:
1. NFC Mode:
The product operates in NFC mode, which utilizes a frequency
range of 13.56MHz for both transmission and reception of data.
2. Power Requirements:
For operation in the European Union (EU), ensure that the
product receives a power level of 21.33dBuV/m at a distance of 10
meters.
3. Caution:
Caution: The user should note that any changes
or modifications made to the product without explicit approval from
the responsible party may result in the user losing the authority
to operate the equipment.
Frequently Asked Questions (FAQ):
Q: What is NFC mode?
A: NFC stands for Near Field Communication, a
technology that enables short-range communication between
electronic devices.
Q: What is the significance of the 13.56MHz frequency
range?
A: The 13.56MHz frequency range is commonly
used in NFC and RFID applications due to its balance of range and
data transfer speeds.
Lors de l’installation et de l’utilisation de cet appareil, la distance minimale entre le radiateur et le corps doit être de 20 cm.
Mode NFC
Frequency Range 13.56MHz(TX/RX)
Power for EU 21.33dBuV/m@10m
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Documents / Resources
 |
Sunmi T3 Separate Monitor [pdf] Instruction Manual 2AH25NP52, 2AH25NP52, np52, T3 Separate Monitor, T3, Separate Monitor, Monitor |