SUNJOE HJ604C Cordless Grass Shear Plus Hedge Trimmer Instruction Manual

Important Safety Instructions:
It is crucial to follow these safety guidelines to prevent any accidents or injuries while using the Cordless Grass Shear + Hedge Trimmer:

Always operate the machine in a well-lit and clean work area to avoid accidents.
Avoid using the machine under the influence of drugs, alcohol, or medication to prevent injuries.

Wear appropriate personal protective equipment, including eye protection, when operating the machine.
Ensure the switch is in the off position before connecting to the power source or battery pack.

Avoid operating the machine in explosive atmospheres to prevent potential hazards.

Product Usage Steps:

Ensure the battery is fully charged before use.
Attach the appropriate blade for either grass shearing or hedge trimming.

Press and hold the power button to activate the tool.
Carefully trim grass or hedges by moving the tool in a controlled manner.

After use, turn off the tool and disconnect the battery for safety.

HAS YOUR SNOW JOE EXPERIENCE LEFT YOU SMILING? TELL YOUR FRIENDS AND TAG US!
We love to hear your feedback! Share your experience by writing comments and reviews on shopjoe.com, or connect with us on social media! @ SNOWJOECO

OR HAS SOMETHING LEFT YOU LESS THAN SATISFIED? WE’RE SORRY ABOUT THAT!
Our friendly customer service team is ready to help you with any issues you may have, Monday — Sunday from 9 AM to 5 PM EST. CALL US, EMAIL US, CHAT WITH US.

HELP@SHOPJOE.COM

SHOPJOE.COM
1-866-225-9723

UPGRADE YOUR COVERAGE AT SHOPJOE.COM/REGISTER FOR UP TO 3, 4, OR 5 YEARS OF TOTAL TOOL COVERAGE
When we say we stand behind our product, we mean it! Now you can blow, mow, cut, saw, or tend to any other yard task with confidence, knowing that if there is a problem with your tool within the warranty period, we will gladly solve it.

Snow Joe®, Sun Joe®, Aqua Joe®, Auto Joe®, and Power Joe® are registered trademarks used under license from Weather Brands LLC. New Castle, DE 19720

SCANREGISTER ONLINE TODAY

ACTIVATE YOUR 2-YEAR WARRANTY
RECEIVE 90 DAYS BONUS COVERAGE

VISIT SHOPJOE.COM/REGISTER

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use
Always follow these safety guidelines. Failure to do so may result in serious bodily injury or death.

General Machine Safety Warnings

WARNING!
Read all safety warnings, instructions, illustrations, and speciﬁcations provided with this machine. Failure to follow all instructions listed below may result in electric shock, ﬁre, and/or serious injury.

Save all warnings and instructions for future reference.

Work area safety
a. Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
b. Do not operate the machine in explosive atmospheres, such as in the presence of ﬂammable liquids, gases, or dust. Machines create sparks, which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a machine. Distractions can cause you to lose control.
Electrical safety
a. Machine plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with the earthed (grounded) machine. Unmodiﬁed plugs and matching outlets will reduce the risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not operate the machine in rain or wet conditions. This may increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the machine. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
e. When operating a machine outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
Personal safety
a. Stay alert, watch what you are doing, and use common sense when operating a machine. Do not use a machine while you are tired or under the inﬂuence of drugs, alcohol, or medication. A moment of inattention while operating a machine may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the oﬀ-position before connecting to a power source and/or battery pack or picking up or carrying the machine. Carrying the machine with your ﬁnger on the switch or energising the machine that has the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the machine on. A wrench or a key left attached to a rotating part of the machine may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.
h. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
Machine use and care
a. Do not force the machine. Use the correct machine for your application. The correct machine will do the job better and safer at the rate for which it was designed.
b. Do not use the machine if the switch does not turn it on and oﬀ. Any machine that cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the machine before making any adjustments, changing accessories, or storing the machine. Such preventive safety measures reduce the risk of starting the machine accidentally.
d. Store idle machines out of the reach of children and do not allow persons unfamiliar with the machine or these instructions to operate the machine. Machines are dangerous in the hands of untrained users.
e. Maintain machine and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may aﬀect the machine’s operation. If damaged, have the machine repaired before use. Many accidents are caused by poorly maintained machines.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g. Use the machine, accessories, tool bits, etc.
By these instructions, taking into account the working conditions and the work to be performed. Use of the machine for operations diﬀerent from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
BATTERY tool use and care
a. Recharge only with the charger speciﬁed by the manufacturer. A charger that is suitable for one type of BATTERY pack may create a risk of ﬁre when used with another BATTERY pack.
b. Use the machine only with speciﬁcally designated BATTERY packs. Use of any other BATTERY packs may create a risk of injury and ﬁre.
c. When BATTERY pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the BATTERY terminals together may cause burns or a ﬁre.
d. Under abusive conditions, liquid may be ejected from the BATTERY; avoid contact. If contact accidentally occurs, ﬂush with water. If liquid comes into contact with the eyes, seek medical help. Liquid ejected from the BATTERY may cause irritation or burns.
e. Do not use a BATTERY pack or tool that is damaged or modiﬁed. Damaged or modiﬁed batteries may exhibit unpredictable behaviour resulting in ﬁre, EXPLOSION, or risk of injury.
f. Do not expose a BATTERY pack or tool to ﬁre or excessive temperature. Exposure to ﬁre or temperatures above 130 °C may cause an explosion.
NOTE: The temperature “130°C” can be replaced by the temperature “265°F”.
g. Follow all charging instructions and do not charge the BATTERY pack or tool outside the temperature range speciﬁed in the instructions. Charging improperly or at temperatures outside the speciﬁed range may damage the BATTERY and increase the risk of ﬁre.
Service
a. Have your machine serviced by a qualiﬁed repair person using only identical replacement parts. This will ensure that the safety of the machine is maintained.
b. Never service damaged BATTERY packs. Service
of BATTERY packs should only be performed by the manufacturer or authorized service providers.
c. If your machine requires service, contact an authorized Snow Joe® + Sun Joe® dealer or call the All Season Power customer service center at 1-866-225-9723 for assistance. Only identical replacement parts should be utilized for repairs. This will ensure that the safety of the power tool is maintained.
d. If the battery charger cable is damaged, it must be immediately replaced to avoid a hazard. Contact the All Season Power customer service center at 1-866-225-9723 for assistance.

Hedge Trimmer Safety Warnings

a. Keep all parts of the body away from the blade. Do not remove cut material or hold material to be cut when blades are moving. Blades continue to move after the switch is turned oﬀ. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
b. Carry the hedge trimmer by the handle with the blade stopped and take care not to operate any power switch. Proper carrying of the hedge trimmer will decrease the risk of inadvertent starting and resultant personal injury from the blades.
c. When transporting or storing the hedge trimmer, always ﬁt the blade cover. Proper handling of the hedge trimmer will decrease the risk of personal injury from the blades.
d. When clearing jammed material or servicing the unit, make sure all power switches are oﬀ and the lock-oﬀ is in the locked position. Unexpected actuation of the hedge trimmer while clearing jammed material or servicing may result in serious personal injury.
e. Hold the hedge trimmer by insulated gripping surfaces only because the blade may contact hidden wiring. Blades contacting a “live” wire may make exposed metal parts of the hedge trimmer “live” and could give the operator an electric shock.
f. Keep all power cords and cables away from the cutting area. Power cords or cables may be hidden in hedges or bushes and can be accidentally cut by the blade.
g. Do not use the hedge trimmer in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.

Grass shears safety warnings.

a. Do not use the grass shear in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.
b. Keep all power cords and cables away from the cutting area. Power cords or cables may be hidden and can be accidentally cut by the blade.
c. Wear ear protection. Adequate protective equipment will reduce the risk of hearing loss.

d. Hold the grass shear by insulated gripping surfaces only because the blade may contact hidden wiring or its cord. Blades contacting a “live” wire may make exposed metal parts of the grass “live” and could give the operator an electric shock.
e. Keep all parts of the body away from the blade. Do not remove cut material or hold material to be cut when blades are moving. Blades continue to move after the switch is turned oﬀ. A moment of inattention while operating the grass shear may result in serious personal injury.
f. When clearing jammed material or servicing the grass shear, make sure the power switch is oﬀ and the power cord is disconnected. Unexpected actuation of the grass shear while clearing jammed material or servicing may result in serious personal injury.

g. Carry the grass shear by the handle with the blade stopped and take care not to operate the power switch. Proper carrying of the grass shear will decrease the risk of inadvertent starting and resultant personal injury from the blades.
h. When transporting or storing the grass shear, always use the blade cover. Proper handling of the grass shear will decrease the risk of personal injury from the blades.

Safety Symbols

The following table depicts and describes the safety symbols that may appear on this product. Read, understand, and follow all instructions on this tool before attempting to assemble and operate it.

Know Your Cordless Grass Shear Hedge Trimmer

Grass shear + hedge trimmer handle
Safety lock-off button

Charge level indicator
Power ON/OFF trigger switch
Charging socket

Motor housing
Blade cover
Grass shear blade sheath

Grass shear blade
Hedge trimmer blade
Hedge trimmer blade sheath

Battery charger
Charger plug

Technical Data

Battery Voltage*……………………………………………………………………… 7.2V

Battery Capacity…………………………………………………………………..1.5 Ah
Battery Type…………………………………………………………………. Lithium-ion
Charger……………………………………………………………………………. Included

Charger Input ……………………………………………………….120V AC 60 Hz
Charger Output …………………………………………………………9V 0.4 A
Charge Time Max……………………………………………………………… 5 hours

Grass Shear Blade………………………………………………….4 in. (10.2 cm)
Hedge Trimmer Blade……………………………………………..6 in. (15.2 cm)
Hedge Trimmer Cutting Diameter…………………………. 0.3 in. (0.8 cm)

No Load Speed…………………………………………………… 1250 ± 10% rpm
Net Weight………………………………………………………….. 2.1 lbs (0.94 kg)

DISCLAIMER: Initial no-load voltage, when fully charged, peaks at 8.4V; nominal voltage under typical load is 7.2V.

Unpacking the Carton Contents

Cordless grass shear + hedge trimmer
Hedge trimmer blade
Hedge trimmer blade sheath

Grass shear blade
Grass shear blade sheath
Charger

Manual

Carefully remove the cordless grass shear + hedger trimmer and check to see that all of the above items are supplied.
Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store. Please call the All Season Power customer service center at
1- 866-225-9723.

NOTE: Do not discard the shipping carton and packaging material until you are ready to use your new cordless grass shear + hedge trimmer. The packaging is made of recyclable materials. Properly dispose of these materials by local regulations.

IMPORTANT! The equipment and packaging material are not toys. Do not let children play with plastic bags, foil, or small parts. These items can be swallowed and pose a suﬀocation risk!

Assembly

This cordless grass shear + hedge trimmer comes completely assembled, with the grass shear blade pre-installed.

CAUTION! Wear protective gloves before handling the blades.
WARNING! Make sure the unit is powered oﬀ before handling the blades.

Fitting and Changing the Blades

The grass shear + hedge trimmer is equipped with two interchangeable blades that are designed for do-it-yourself grooming projects around your garden. The hedge trimmer blade is used to cut hedges and shrubs (Fig. 1), while the grass shear blade is used to cut grass and hedges where ﬁner detail is required (Fig. 2).

To fit or change the blade, place the grass shear + hedge trimmer on a hard surface. Turn the unit upside down in one hand and use the other hand to gently lift the tab of the blade cover. Slide the tab back until the cover can be removed (Fig. 3).
Gently remove the blade by lifting the end tip of the blade off of the grass shear + hedge trimmer unit (Fig. 4).
Insert the desired blade into the base of the motor housing (Fig. 5).NOTE: You may need to manually move the blade or gear shaft to align the gear shaft with the gear in the center of the unit.

Align the gear shaft in the middle of the blade with the gear in the middle of the unit. Align the four (4) lugs so that the blade lays flat against the housing for a secure fit (Fig. 6).
Once the blade is in position, replace the blade cover by aligning the cover with the slots on the base of the motor housing (Fig. 7).
Push forward on the blade cover until it slides and clicks into place (Fig. 8). The grass shear + hedge trimmer is now ready for use.

NOTE: If you have any questions, please call the All Season Power customer service department at 1-866-225-9723 for assistance.

Before Using

Charging Procedure

The battery charger supplied matches the lithium-ion battery installed in the tool. Do not use other battery chargers.

The lithium-ion battery is protected against deep discharging. When the battery is empty, a protective circuit will automatically switch OFF the machine. The blade will no longer move, and a slight whistling sound will be heard.
Charge the battery for 5 to 7 hours, then use it until it runs down (i.e., the tool starts to operate slowly). Recharge for 5 to 7 hours again before resuming operation.

WARNING!
Continued and excessive overuse of the ON/OFF trigger switch can permanently damage the lithium-ion battery.

CAUTION!
This charger does not automatically turn off when the battery is fully charged. Please take care not to leave the grass shear + hedge trimmer plugged into the charger. Switch off or unplug the charger at the mains when charging is complete.

NOTE:
The charge level indicator LED light will illuminate red when the charger is plugged in and is charging the grass shear + hedge trimmer. The middle LED light will turn green when the grass shear + hedge trimmer is fully charged.

The charging process starts as soon as the charger is plugged into both the proper electrical outlet and the tool.

During the charging procedure, the handle of the tool will feel slightly warm to the touch. This is normal.
When no further use is planned for an extended period, disconnect the battery charger from the outlet and the unit.
Do not use the tool during the charging procedure.

Battery Charging

The length of service between each charging varies depending on the type of work you are doing. The battery in this grass shear + hedge trimmer has been designed to provide maximum trouble-free life. However, like all batteries, it will eventually wear out. To obtain the longest possible battery life, we suggest the following:

Store and charge your grass shear + hedge trimmer in a cool area. Temperatures above or below normal room temperature will shorten battery life.
Never store the grass shear + hedge trimmer with the battery in a discharged condition. Recharge the unit immediately after it is discharged.

All batteries gradually lose their charge. The higher the temperature is, the faster they lose their charge. If you store your grass shear + hedge trimmer for long periods without using it, recharge the battery every 6 months. This will extend battery life.

NOTE: The grass shear + hedge trimmer has been shipped in a low-charge condition and should be fully charged before use.

Plug the charger adaptor into an appropriate AC power

LED no. 1 will illuminate red when charging. LEDs 2 and 3 will not illuminate when charging (Fig. 10).outlet. Connect the AC adaptor charger plug into the charging socket of the grass shear + hedge trimmer to start charging (Fig. 9).
The battery will take approximately 3 hours to charge. Charging may take up to 5 hours, depending on the level of charge left in the battery and the ambient temperature.

NOTE: A charge level indicator LED light will always be illuminated when the charger is plugged in and the mains power is turned on. The charge indicator indicates the charge status of the grass shear + hedge trimmer as shown below:

Condition	Color of LED’s	LED’s Illuminated
Charging	Red	1- Red, 2- Not illuminated, 3- Not illuminated
Fully Charged	Green	1- Not illuminated, 2- Green, 3- Not illuminated
Low Charge	Yellow	1- Not illuminated, 2- Not illuminated, 3- Yellow

Operation

IMPORTANT! The product is intended for light-duty trimming of shrubs and lawn edges for residential properties.
NOTE: Charge the battery for 3 to 5 hours, then use it until it runs down (i.e., the tool will only slowly operate, and the yellow charger indicator will be illuminated). Recharge for 3 to 5 hours again before resuming operation.
WARNING! The blades continue to move for a few seconds after the tool is switched OFF. Turn OFF the tool and wait until the blades come to a complete stop before adjusting or cleaning.

CAUTION! Never touch the blade or blade rail while the tool is in operation, and be aware of the sharp edges even when
The grass shear + hedge trimmer is not in use.

Starting + Stopping

To power ON, push and hold the safety lock-off button with your thumb while pressing the ON/OFF trigger switch with your forefinger. Once the trigger switch engages, you can release the safety lock-off button and proceed with operation (Fig. 11).NOTE: The safety lock-off button reduces the risk of accidental starting.

To power OFF, simply release the ON/OFF trigger switch (Fig. 11).

CAUTION! Do not force the blades through dense growth. If the blades slow down, then reduce your cutting pace. Should the blades jam, release the trigger immediately. Do not use your fingers to free up jammed blades. Jammed blades can release suddenly, causing serious injury.

CAUTION! Always ensure proper footing and balance in a clean and clear work environment before switching to the grass
shear + hedge trimmer.
NOTE: The yellow charge indicator LED light will illuminate when the battery is running low and requires charging.

Trimming Tips

WARNING! Only use the hedge trimmer blade for this operation. Never use the telescoping pole with the hedge
trimmer for trimming hedges.

NOTE: Try to keep the cutting device angled at approximately 15° to the cutting surface (Fig. 12).

Shaping – A hedge should be trimmed to achieve a trapezoidal form; it should widen toward the bottom on
both sides. Shaping a hedge in this manner improves the penetration of light to the lower extremities. A general guideline is to slant the hedge approximately 4 in. (10 cm) for each 39 in. (1 m) of hedge height.
Cutting Sequence –First cut both sides; start at the bottom and work towards the top. This prevents cuttings from falling into an area that you have yet to trim.
Trimming the Top – Where the branches have grown extremely long, cut back the hedge in several stages. The shorter cuttings obtained are best suited for composting.

Pruning Thick Branches – When older hedges are to be cut a substantial amount, use pruning shears or some other device to trim thicker branches (greater than 0.3 in. [8 mm] in diameter) to the desired length before starting work with the hedge trimmer.
To shape precisely, run a taught line between the extreme edges of the hedge and then trim along the length of the line.
Ensure that the blade does not come into contact with any object made of hard material that could damage it, such as fencing wire or metallic plant supports.

Maintenance

WARNING! Always switch the product off and let the product cool down before performing inspection, maintenance, and cleaning work.

Keep the ventilation vents of the tool clean at all times. If possible, prevent foreign matter from entering the vents.

If the enclosure of the trimmer requires cleaning, do not use solvents to clean it. Only use a moistened soft cloth. Never let any liquid get inside the tool, and never immerse any part of the tool in a liquid.
The blade rail should be cleaned and treated with light machine oil or spray lubricant (such as WD40, CRC 5.56, or RP7) after each use. When a job lasts for a long period, it is recommended that the blade rail also be treated with a spray lubricant at regular intervals during operation.
Inspect the product before each use for worn and damaged parts. Do not operate it if you find broken and worn parts.

Blade Maintenance
To ensure years of efficient and trouble-free operation, blade cleaning should be performed if sap and debris have built up or if you live in an area where the soil is sandy. Cleaning unusually heavy deposits may require the removal of the blades.

NOTE: All Season Power will not be held responsible for any damage or injuries caused by repair of the trimmer by an unauthorized person or by mishandling of the trimmer.

Keep the cutting blades clean and free of debris. Remove trimmings.

Apply a small amount of suitable lubricant on the blades to retain a good cutting performance (Fig. 13).
Keep the blades sharp. Have a worn or damaged cutting device replaced with a new one of the same type by a qualified specialist. Spare parts may be ordered online at shopjoe.com or via phone by contacting the All SeasonPower customer service center at 1-866-225-9723.

Storage

When the tool will not be used for several months, it is ideal to leave the battery connected to the charger. For optimal storage, proceed as follows:

Fully charge the battery.
Clean the product as described above.
Assemble the blade covers over the blades (Fig. 14).

Store the tool in a secure and dry location. The storage temperature must always remain in the range of 41°F (5°C) to 104°F (40°C).
Before using the tool after prolonged storage, fully recharge the battery.

Battery Caution Disposal

Always dispose of your battery pack according to federal, state, and local regulations. Contact a recycling agency in your area for recycling locations.

CAUTION! Even discharged battery packs contain some energy. Before disposal, use electrical tape to cover the terminals to prevent the battery pack from shorting, which could cause a fire or explosion.

WARNING! To reduce the risk of injury or explosion, never burn or incinerate a battery pack even if it is damaged, dead, or completely discharged. When burned, toxic fumes and materials are emitted into the surrounding atmosphere.

Batteries vary according to the device. Consult your manual for specific information.
Install only new batteries of the same type in your product
(where applicable).
Failure to insert batteries in the correct polarity, as indicated in the battery compartment or manual, may shorten the life of the batteries or cause batteries to leak.
Do not mix old and new batteries.
Do not mix Alkaline, Standard (Carbon-Zinc), or Rechargeable (Nickel Cadmium, Nickel Metal Hydride, or Lithium-Ion) batteries.
Do not dispose of batteries in fire.
Batteries should be recycled or disposed of as per state and local guidelines.

Service + Support
If your Sun Joe® cordless grass shear + hedge trimmer requires service or maintenance, please call the All Season Power customer service center at 1-866-225-9723.

Model + Serial Numbers
When contacting the company or reordering parts, you will need to provide the model and serial numbers of your product. These are found on the decal affixed to the housing or handle of your cordless grass shear + hedge trimmer. Copy these numbers into the space provided below.

HJ604C Charger

Federal Communications Commission (FCC)

WARNING! Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Class B device:

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to ottheng instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different than the one the receiver is connected to.
Consult the dealer or an experienced radio/TV technician for help.

Optional Accessories

WARNING! ALWAYS use only authorized Snow Joe® + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this cordless grass shear + hedge trimmer. Contact All Season Power if you are unsure whether it is safe to use a particular replacement part or accessory with your cordless grass shear + hedge trimmer. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

NOTE: Accessories are subject to change without any obligation on the part of All Season Power to provide notice of such changes. Accessories can be ordered online at shopjoe.com or via phone by contacting the All Season Power customer service center at 1-866-225-9723.

ALL SEASON POWER CUSTOMER PROMISE

ABOVE ALL ELSE, All Season Power LLC (“All Season Power”) is dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a Snow Joe®, Sun Joe®, Aqua Joe®, or Auto Joe® product (“Product”) does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we have a Limited Warranty (“Warranty”) for our Products.

OUR WARRANTY

All Season Power warrants new, genuine, powered and non-powered Products to be free from defects in material or workmanship when used for ordinary household use for two years from the date of delivery of the Product to the original, end-user purchaser when purchased from All Season Power or one of All Season Power’s authorized sellers with proof of purchase. Because All Season Power is unable to control the quality of its Products sold by unauthorized sellers, unless otherwise prohibited by law, this Warranty does not cover Products purchased from unauthorized sellers. If your Product does not work or there’s an issue with a specific part that is covered by the terms of this Warranty, All Season Power will elect to either (1) send you a free replacement part, (2) replace the Product with a new or comparable product at no charge, or (3) repair the Product. How cool is that! This Warranty gives you specific legal rights, and you may also have other rights, which vary from State to State.

PRODUCT REGISTRATION:
All Season Power strongly encourages you to register your Product. You can register online at shopjoe.com/register, by printing and mailing in a registration card available from our website, by calling our Customer Service Department at 1-866-225-9723, or by e-mailing us at help@allseasonpower.com. Failure to register your Product will not diminish your warranty rights. However, registering your Product will allow All Season Power to better serve you with any of your customer service needs.
WHO CAN SEEK LIMITED WARRANTY COVERAGE:
This Warranty is extended by All Season Power to the original purchaser and original owner of the Product.
WHAT IS NOT COVERED?
This Warranty does not apply if the Product has been used commercially or for non-household or rental applications. This Warranty also does not apply if the Product was purchased from an unauthorized seller. This Warranty also does not cover cosmetic changes that do not affect performance. Wearing parts like belts, augers, chains, and tines are not covered under this Warranty and can be purchased at shopjoe.com/support or by calling 1-866-225-9723.

Keep your warranty intact. Only use CERTIFIED AUTHENTIC Snow Joe®, Sun Joe®, Aqua Joe® + Auto Joe® replacement parts + accessories. Use of any other parts + accessories will void the warranty. Genuine parts + accessories can be found and purchased online at shopjoe.com/support by entering the model number of your product.

Frequently Asked Questions

How do I know when the battery needs recharging?
The tool will start losing power or slow down significantly when the battery needs recharging. It is recommended to recharge the battery before completely draining it to prolong its lifespan.
Can I use this tool to cut thick branches on shrubs?
This tool is designed for light-duty trimming of grass and hedges. It is not recommended for cutting thick branches on shrubs or trees as it may damage the blades and reduce the tool’s efficiency.
How should I clean and maintain the Cordless Grass Shear + Hedge Trimmer?
After each use, make sure to remove any debris or grass clippings from the blades. You can use a soft brush or cloth to clean the tool. Regularly check for any signs of wear and tear on the blades and replace them if necessary to maintain optimal performance.

Documents / Resources

SUNJOE HJ604C Cordless Grass Shear Plus Hedge Trimmer [pdf] Instruction Manual
HJ604C, HJ604C Cordless Grass Shear Plus Hedge Trimmer, HJ604C, Cordless Grass Shear Plus Hedge Trimmer, Grass Shear Plus Hedge Trimmer, Shear Plus Hedge Trimmer, Plus Hedge Trimmer, Hedge Trimmer, Trimmer

References

User Manual

SUNJOE HJ604C Cordless Grass Shear Plus Hedge Trimmer

Specifications

Product Usage Instructions