sunjack logoDC PLUG ADAPTERS
User Manual
—Please read carefully before using—

GENERAL

Thank you for purchasing this SUNJACK® product. Before operating, please read these instructions carefully. This instruction manual contains information for safe use and maintenance of the product. Before using this device, the user should be familiar with its operating requirements and limitations.
Please keep this instruction manual in a safe place for future reference. The manufacturer does not accept responsibility for any damages due to not following these instructions.

PRODUCT OVERVIEW

The DC plug adapters are designed to convert a DC plug size 5.5 mm x 2.1 mm to the size of the plug adapter. Suitable for converting a DC5521 plug size to the compatible size of various electronic devices such as laptops, speakers and more. The female end of each plug adapter will accept a 5.5 mm x 2.1 mm male plug. The set also includes a DC5521 female to female plug. This allows you to connect two cables with plugs sized 5.5 mm x 2.1 mm.
NOTE: The DC Plug Adapters only convert the size of the plug.
They do not convert the volts, current (amperage) or wattage of the adapter. Please do not use a power adapter that is not compatible with the equipment specifications.

WHAT’S IN THE BOX

The adapter plug kit includes the following adapter plug sizes:
4.0 x 1.7 mm, 5.5 x 1.7 mm, 5.5 x 2.5 mm, 5.5 x 3.0 mm, 6.0 x 3.0 mm, 6.5 x 4.4 mm, 7.9 x 5.5 mm, 7.9 x 0.9 mm, 8.0 x 2.0 mm, 5.5 x 2.1 mm (female to female)

OPERATION

  1. Select the appropriate plug adapter size that is compatible with the device.
  2. Connect the DC5521 plug to the female end of the plug adapter
  3. Insert the male end of the plug adapter into your electronic device.

sunjack logo©2024. Proudly designed and engineered in the USA
www.SunJack.com / hello@sunjack.com

Documents / Resources

sunjack DC5521 Plug Adapter Kit [pdf] User Manual
DC5521, DC5521 Plug Adapter Kit, Plug Adapter Kit, Adapter Kit, Kit

References

Leave a comment

Your email address will not be published. Required fields are marked *