Wireless Remote shutter
Ios For Owner’s Manual
*Smart phone OS update or change in the future might lead to imcompatible
Product Illustration
Specifications
MODEL! Shutter
Communication Wireless V4.2
Transmit frequency 2.4GHz -2.4835GHz
Communication distance 10m(30ft)
Battery life CR2032 X1 cell/about 6 months
under working in 10 times a day
Dimension 48mm X 30mm X 10mm
Weight About 8g
Battery
Positive pole upwards to install the battery.
How To Use
Easy to set up, Easy to use
- Paring
a. Turn on the shutter by switching the on/off button, AB Shutter3 will enter into pairing mode and indicator LED starts flash quickly at the same time
b.Activate the Wireless function on your phone and sourcing the devices around
c. Select the device of “AB Shutter3” from the list and paring will be finished autonmaticaly in few seconds - Select APP
Use inbuilt camera APP to taking the photos via AB Shutter3 or you can download the APP of “camera 360” from Google play if in built camera cannot be supported, check the compatible device and APP in following instruction
Key Word Search in GooglePlay and App Store “Camera 360” - Shooting
Select a correct APP and press the proper button on the shutter for IOS and Android phones to taking the photos.
Compatible devices
Compatible with Android 4.2.2 OS or newer and iOS 6.0 or newer
| Compatibility List | inbuilt camera app | camera360 app |
| iPhone 5s/5c/5, iPhone 4s/4, iPad 3/2, iPad mini, iPad with Retina Display, iPod touch 4th generation or newer. |  |
|
| Samsung Galaxy S2/S3/S4+, Note 1, Note 2, Note3+, Tab 2, Note 8, 10.1+ Moto X / Nexus 4,5,7+ / Xiaomi 1S, 2S, 3+ |  |
|
| Sony Xperia S HTC New one and X+ Other android phones | not use | |
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Documents / Resources
 |
Suncore F30070M Wireless Remote Shutter [pdf] Owner's Manual 2BOBC-F30070M, 2BOBCF30070M, f30070m, F30070M Wireless Remote Shutter, F30070M, Wireless Remote Shutter, Remote Shutter, Shutter |