PN24_HO-4060K 2×4 LED Selectable High Output Ceiling Panel
“
Product Information
Specifications:
- Product: 2×4 LED Selectable High Output Ceiling Panel
- SKU: PN24_HO-4060K
- Voltage: 120-277V
- Wattage: 40W/50W/60W
- Luminous Flux: 5000/6500/7700 lm
- Color Temperature: 130
Product Usage Instructions:
Installation:
- Review all instructions carefully before installation.
- Ensure the power is turned off before proceeding.
- Identify the wiring connections for L(Black), Groun:eh2,
DIM-(Pink), DIM+(Purple). - Follow the step-by-step installation guide provided in the
manual. - Securely mount the ceiling panel in the desired location.
- Connect the wiring following the color-coded instructions.
Operation:
- After installation, turn on the power source.
- Use the dimming controls to adjust the brightness level as
needed. - Select the desired wattage (40W, 50W, 60W) based on your
lighting requirements. - The panel is designed to provide high output lighting for
various settings.
Maintenance:
Regularly clean the panel surface with a soft, dry cloth to
remove any dust or debris that may accumulate over time.
FAQ:
Q: What should I do if the panel does not turn on?
A: Check the power source and ensure the wiring connections are
secure. If the issue persists, contact customer support for
assistance.
Q: Can I install this panel in a damp location?
A: No, this panel is designed for indoor use in dry locations
only. Avoid exposure to moisture to prevent damage.
Q: How can I change the wattage settings on the panel?
A: Use the provided controls to switch between the available
wattage options (40W, 50W, 60W) based on your lighting needs.
“`
Lighting made better.
User Manual
2×4 LED Selectable High Output Ceiling Panel
SKU: PN24_HO-4060K
support@sunco.com 844-334-9938
P1 P1
P3 P3 P3
A
I BeforeYouStart
.
To reduce the risk of fire, electric shock, or physical injury:
· Turn off circuit breaker before installing this fixture · Suitable for use in wet environments at temperatures ranging from -4’Fto 113’F. · Not for use where directly exposed to water. · Not intended for use with emergency fixtures · Not compatible with photo controls. · Not compatible with occupancy sensors · Not compatible with third party sensors. · Not compatible with all dimmers. For more dimming information, please visit www.sunco.com. · Not compatible with timing devices.
· All electrical connectionsmust be in accordancewith local
and National Electric Code(N.E.C.) standards
· Please review installation manual carefully before proceeding. Consult a qualified electrician if you are unfamr with proper electrical wiring connections
WARNING, Cancer & Reproductive Harm- www.P65Warnings.ca.gov
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1.) This device may not cause harmful interference. 2.) This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.
L(Black)
Groun:eh2
DIM-(Pink)
7
DIM+(PurpIe)
2
(40W, 50W, 60W)
STEP 1 STEP 2 STEP 3
STEP 4 STEP 5 STEP 6
(40W,50W,60W)
STEP 1 STEP 2 STEP 3
STEP 4 STEP 5
120-277V 40W/50W/60W
Hours 5000/6500/7700 lm
130
Lighting made better.
support@sunco.com 844-334-9938
REV1.0
Documents / Resources
 |
Sunco PN24_HO-4060K 2x4 LED Selectable High Output Ceiling Panel [pdf] User Manual PN24_HO-4060K 2x4 LED Selectable High Output Ceiling Panel, PN24_HO-4060K, 2x4 LED Selectable High Output Ceiling Panel, LED Selectable High Output Ceiling Panel, Selectable High Output Ceiling Panel, High Output Ceiling Panel, Output Ceiling Panel, Ceiling Panel, Panel |