SUNCO LIGHTING UFO High Bay LED Fixture with Accessory Socket

COMPONENTS

EASY INSTALLATION

Suspended with Lifting Hook

1. Turn off power at the circuit breaker before installing.
2. 2. Drill a pilot hole in the ceiling and install a chain or ceiling hook (not included) for adequate support.
3. Attach provided lifting hook by turning clockwise into UFO fixture. Tighten the screw to lock it into place.
4. Use a lifting hook to hang fixture onto ceiling
5. Secure light with safety cables (not included) to prevent it from falling.
   • Use screw to lock lifting hook in place
6. Use wire nuts to connect supply wires to fixture wires.
   • Black to Black
   • White to White
   • Ground to Ground
7. Turn on the circuit breaker and test the light.

WARNING

To reduce the risk of fire, electric shock, or physical injury:

• This product should be installed by a person familiar with the construction and operation of the product and the hazards involved.
• Abide by related regional and local laws or regulations.
• Check for shipping damage prior to installation. If the product is damaged, do not use it.
• Proper grounding is required to ensure safety. Do not install this fixture in the rain. the power immediately and notify relevant personnel.
• Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
• Use safety precautions. Safety eyeglasses and gloves are recommended.

SPECIFICATIONS

Documents / Resources

SUNCO LIGHTING UFO High Bay LED Fixture with Accessory Socket [pdf] Instruction Manual UFO High Bay LED Fixture with Accessory Socket, UFO High Bay LED Fixture, LED Fixture with Accessory Socket, UFO High Bay LED Fixture, LED, LED Fixture

References

• User Manual