SUMO STRENGTH EVOLVE Functional Trainer Instruction Manual

SUMO STRENGTH EVOLVE Functional Trainer

Thank You

• Thank you for choosing Sumo Strength gym equipment.
• We know you have many options when it comes to fitness equipment, and we truly appreciate your trust in us. Our mission is to provide durable, reliable, and high-quality gear that helps you train with confidence, whether at home or in a commercial environment.
• By investing in Sumo Strength equipment, you’re not only purchasing a product – you’re joining a community committed to strength, performance, and longevity.
• We’re here to support you every step of the way. If you ever have questions about your equipment, need assistance with maintenance, or would like expert advice, our team is only a call or email away.
• Train hard, stay strong, and thank you for being part of the Sumo Strength family.

Installation Safety Advice

Proper installation of gym equipment is critical for safety, stability, and long-term performance. Please ensure the following precautions are followed during assembly and installation:

1. Preparation
   • Read all assembly instructions fully before starting.
   • Ensure all parts and tools required are available.
   • Assemble the racking in a clear, flat, stable area free of obstructions.
   • Always have at least two people for installation to safely handle heavy parts.
2. Personal Safety
   • Wear closed-toe shoes, gloves, and safety glasses.
   • Lift heavy components using correct lifting technique (bend at knees, not at the back).
   • Do not attempt to assemble if fatigued or under the influence of alcohol/medications.
3. Assembly
   • Follow the assembly sequence step by step.
   • Use only the bolts, nuts, and fasteners supplied—do not substitute hardware.
   • Tighten all bolts securely, but do not overtighten to avoid thread damage.
   • Install all safety pins, locking mechanisms, and end caps.
   • Do not modify, weld, or drill new holes in the frame.
4. Stability & Anchoring
   • Ensure the racking is level before tightening bolts.
   • Always anchor racks to the floor or wall if specified in the instructions.
   • Use appropriate floor bolts/anchors supplied for your flooring type (concrete, timber, etc.).
   • Check that the structure is solid and does not rock or sway after installation.
5.  Final Checks
   • Inspect the entire structure before first use:
   • All bolts and fasteners fully tightened
   • Safety pins and locks engaged
   • Uprights and crossbeams aligned
   • Test with light loads before applying full weight.
6. Ongoing Safety
   • Perform regular inspections (monthly recommended).
   • Retighten bolts periodically as vibrations and use can cause loosening.
   • Immediately replace any worn or damaged parts.
   • Do not exceed the rated load capacity of the racking system.
   • Ensure all users understand correct and safe usage Warranty Coverage Table.

PART LIST

SIZE

PRODUCT WEIGHT

• 75KG COUNTERWEIGHT
• 2MM –312KG
• 4MM –338KG
• STAINLESS STEEL+2MM–319KG
• STAINLESS STEEL+4MM–332KG
• 100KG COUNTERWEIGHT
• 2MM –362KG
• 4MM –388KG
• STAINLESS STEEL+2MM–369KG
• STAINLESS STEEL+4MM–382KG
• 125KG COUNTERWEIGHT
• 2MM –412KG
• 4MM –438KG
• STAINLESS STEEL+2MM–419KG
• STAINLESS STEEL+4MM–432KG
• 150KG COUNTERWEIGHT
• 2MM –462KG
• 4MM –488KG
• STAINLESS STEEL+2MM–469KG
• STAINLESS STEEL+4MM–482KG

MAX WEIGHT LOAD

• 2MM –500KG
• 4MM –800KG
• STAINLESS STEEL+2MM–500KG
• STAINLESS STEEL+4MM–800KG

TOOLS NEEDED

YOU NEED THE FOLLOWING TOOLS TO ASSEMBLE THE EQUIPMENT

ASSEMBLY INSTRUCTIONS

Care & Maintenance. Gym Racks & Cable Machines
Regular care and maintenance will ensure your equipment remains safe, functional, and long-lasting. Please follow the guidelines below:

1. General Cleaning
   • Wipe down frames, racks, and attachments regularly with a soft cloth and a mild detergent solution.
   • Avoid abrasive cleaners, harsh chemicals, or steel wool, which can damage powder coating and finishes.
   • Dry all surfaces thoroughly after cleaning to prevent rust or corrosion.
   • For rubber parts (handles, bumpers), use warm water and mild soap only.
2. Rust & Corrosion Prevention
   • Keep racks and machines in a dry, well-ventilated environment.
   • Wipe off sweat or moisture immediately after use.
   • Inspect powder-coated areas for scratches or chips; touch up small marks with appropriate protective paint to prevent rust.
   • Store equipment away from damp areas, direct sunlight, or chemicals.
3. Moving Parts & Cables
   • Inspect cables before every use for signs of fraying, kinks, or damage. Replace immediately if damaged.
   • Check pulleys, bushings, and bearings monthly for smooth operation.
   • Lubricate moving parts (such as guide rods and pulleys) every 1–3 months using a silicone-based spray or light machine oil.
   • Ensure cables track properly on pulleys during use.
4. Bolts, Pins & Fasteners
   • Check and tighten all bolts, nuts, and fasteners at least once per month.
   • Inspect safety pins, J-hooks, and attachments regularly for wear or bending. Replace if worn or damaged.
   • Do not continue use if any structural part appears loose, bent, or compromised.
5.  Upholstery & Padding
   • Wipe pads and upholstery after each use with a mild soap solution or antibacterial wipe.
   • Avoid harsh chemicals or bleach, which can crack or dry materials.
   • Inspect stitching and seams regularly. Replace padding if torn or damaged.
6. Usage Guidelines
   • Do not exceed maximum load ratings of racks or cable machines.
   • Use equipment only as intended, with correct attachments and weights.
   • Encourage users to re-rack weights properly to prevent unnecessary wear and damage.
7. Regular Inspection Schedule
   • Daily: Wipe down frames, handles, and pads after use.
   • Weekly: Inspect cables, pulleys, and moving parts for wear.
   • Monthly: Check and tighten all bolts, lubricate guide rods, inspect structural integrity.
   • Annually: Complete a full inspection of all parts and replace any worn or damaged components.

Faults and Warranty Claims
Sumo Strength warrants all goods to be free from defects in materials and workmanship, and of acceptable quality and durability for the purpose for which they are designed. Warranties and guarantees are provided in accordance with Australian Consumer Law.
If an item arrives missing parts, is faulty, defective, or has been damaged during manufacturing, please take photos or video clearly showing the problem and contact us as soon as possible, ideally within 3 business days of receiving your delivery.
We will work with you to resolve the issue, which may include one or more of the following:

• Supplying missing parts or components
• Suggesting a method of self-repair (with compensation offered)
• Arranging repair by a local trades person (with compensation offered)
• Replacing the product (subject to availability)
• Offering an alternative product
• Providing a partial or full store credit or refund

You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

Exclusions
This policy does not cover:

• Normal wear and tear
• Damage from improper assembly or modification
• Damage from abnormal use or abuse
• Damage or wear due to poor or lack of maintenance (e.g. fabric, leather, timber)
• Damage to packaging only
• Damage during customer handling/transport from Click & Collect locations
• Minor variations in dimensions, colour, grain, or finish
• Minor imperfections or superficial blemishes
• Cosmetic damage (e.g. powder coating, fading of rubber or natural materials)

Definitions
Home Use: Equipment used in personal/household environments for personal purposes.
Commercial Use: Equipment used in commercial settings (e.g. gyms, studios, schools, clubs, offices, allied health, or similar facilities) where usage goes beyond personal/household purposes.

Warranty Coverage Table

• Product / Component Home Use Warranty Commercial Use Warranty Notes
• Racks – Frame 10 Years 10 Years
• Excludes wear, rust, cosmetic damage
• Racks – Attachments (Steel) 5 Years 5 Years Same exclusions
• Racks – Attachments (Pins, Pads, Parts)
• 1 Year 6 Months Same exclusions
• Black Hex Dumbbells 2 Years 2 Years Same exclusions
• Commercial PU Dumbbells 5 Years 2 Years Same exclusions
• Adjustable Dumbbells 1 Year None Same exclusions
• Black Bumper Plates 5 Years 1 Year Same exclusions
• Hi-Temp Bumper Plates 5 Years 1 Year Same exclusions
• Competition Bumper Plates 5 Years 1 Year Same exclusions