Sub-Zero ICBID-CI Integrated Drawer Combination Ice Maker
Specifications
- Product Name: Ice Maker ICBID-CI Integrated Drawer Combination
- Manufacturer: Nidec-Servo
- Control Board: Included
- Max Ice Feature: Yes
- Sabbath Mode: Yes
Product Usage Instructions
ICEMAKER OPERATION:
- The control board operates the Nidec-Servo icemaker. Power comes from the control board. The control board manages fill time and icemaker errors, which it senses and displays.
- The control board powers the icemaker system when the is selected and the icemaker energises.
- If the door/drawer switch is closed (drawer/door open), the control board interrupts power to the icemaker, unless the icemaker is in the fill mode. Once the door/drawer switch opens, power does not return to the icemaker for three minutes.
- When the icemaker rotates to the fill position, the icemaker sends voltage to the control board. The control board then sends power to the water valve(s) for a preset duration.
- The fill adjustment screw on the icemaker does not adjust the water fill time. The control board controls the water fill time.
- When the ice harvest is complete, the control board removes power to the icemaker for 45 minutes.
- Max Ice feature runs the evaporator fan at high speed when the compressor is running and at low speed when the compressor is off.
- Sabbath Mode disables the icemaker.
General Information
SERVICE MANUAL INTRODUCTION
- This technical service manual information assists with troubleshooting and diagnosing malfunctions, completion of repairs and return of the product to proper operational condition. Read the complete instructions contained within before initiating any repairs.
- This guide is for use by factory-certified service personnel only.
- Sub-Zero Group, Inc. assumes no responsibility for repairs made by anyone other than factory-certified service technicians.
- Warning and Caution product safety labels appear throughout this manual. Product safety labels appear at the beginning of some sections. Follow the instructions in the product safety labels to avoid personal injury and/or product damage. The sample safety labels illustrate the precautions to take when they appear in this manual.
WARNING
States a hazard is stated that may cause serious injury or death, precautions are not followed.
CAUTION
Indicates that s minor injury or product damage may occur if instructions are not followed.
IMPORTANT NOTE:
Highlights are especially important information.
TIP: Indicates additional, useful information.
Information and images contained herein are copyright of Sub-Zero Group, Inc. Neither this manual nor any information or images contained herein may be copied or used in whole or in part without the express written consent of Sub-Zero Group, Inc. O Sub-Zero Group, Inc., all rights reserved.
INTEGRATED REFRIGERATION PRODUCT RATING PLATE LOCATION
For the column model,s the product rating information is located inside the middle drawer, near the drawer guide opposite the hinge. For tall and drawer models, it is located inside the cabinet, to the left of the upper drawer.
RATING PLATE INFORMATION
Important information for each product is listed on the product rating plate. Rating plates identify:
- Place of manufacture
- Model
- Serial number
- Refrigerant charges
- Total amp draw when operating
- Electrical information
MODEL DESCRIPTIONS AND SALES ACCESSORIES
For more details on individual model descriptions and a listing of all compatible sales accessories, see the International/ Sub-Zero Distributor Price List.
INTEGRATED REFRIGERATION MODEL KEY
- Description Model Character
- Integrated Column IC
- Integrated Tall IT
- Integrated Drawers ID
All Refrigerator R - All Freezer F
- Combination C
- Internal Dispenser ID
- Ice Maker I
- Preservation Model P
- Right-Hinge -RH
- Left-Hinge -LH
- International Designation ICB
PRODUCT USE AND CARE, AND INSTALLATION GUIDES
- Product Use and Care Guides, Installation Guides and other product specifications are available at the Product Distributor website.
- ICBID-CI Integrated Drawer Combination
General Information
- service.subzero.com
- 7041359 REVA
UNIT WARRANTY
Product warranty is determined by the installation location and the date of installation.
- Follow the link to view product warranties http://service.subzero.com/ClaimsAndOrderProcessing/Pages/
WarrantyInfo.
- Warranties start on the day of product installation.
- Search for warranty and service information by serial number, customer last name and address using Unit History at http://service.subzero.com/Tools/UnitHistory
FAQs
Q: How do I enable the Max Ice feature on the Ice Maker?
A: To enable the Max Ice feature, ensure that the icemaker is on and press the Max Ice button on the control panel. The feature will run the evaporator fan at high speed when the compressor is running and at low speed when it is off.
Q: How can I disable the icemaker during Sabbath Mode?
A: During Sabbath Mode, the icemaker is disabled. No ice will be produced during this mode. To disable it, simply deactivate Sabbath Mode following the manufacturer’s instructions.
Documents / Resources
 |
Sub Zero ICBID-CI Integrated Drawer Combination Ice Maker [pdf] User Guide ICBID-C, ICBID-C HC -49-49, ICBID-CI Integrated Drawer Combination Ice Maker, ICBID-CI, Integrated Drawer Combination Ice Maker, Combination Ice Maker, Ice Maker, Maker |