SFT Praamplifier Pickup System User Manual

1. Bubuka

Thank you for choosing the SFT Preamplifier Pickup System. This innovative device is designed to significantly enhance the acoustic properties of your guitar, providing rich, resonant tones and versatile effects. This manual will guide you through the installation, operation, and maintenance of your new preampSistim liifier.

2. Fitur konci

• SFT (Same Frequency Trans) Technology: Drives the guitar body to phonate, increasing frequency response and making the sound more resonant, solid, and dynamic, even without an external amppangagung.
• Pangaruh terpadu: Features built-in Reverb, Chorus, and Delay effects for creative sound shaping.
• Dual-Pickup System: Combines a piezo pickup and a microphone to capture comprehensive details of your playing, adding extensiveness and dynamics.
• Konektipitas Bluetooth: Allows connection to a mobile phone for playing along with background music or tracks.
• Batré anu tiasa dicas deui: Equipped with a 2000mAh rechargeable Li-ion battery for portable use.
• Konstruksi awét: Made from Acrylonitrile Butadiene Styrene (ABS) material.

3. Eusi Paket

Punten parios yén sadaya barang aya dina pakét:

• 1 x SFT Preamplifier Pickup
• 1 x End-Pin Jack
• 1 x Vibrating Horn
• 1 x Pickup Wire
• 1 x Kabel Tipe-C
• 2 x Klip

4. Setup jeung Instalasi

Catetan penting: This is an on-board preamplifier system that requires opening holes in your guitar for proper installation. Professional installation by a qualified luthier or guitar technician is highly recommended to avoid damage to your instrument.

4.1. komponén Leuwihview

Gambar 4.1: Leuwihview of the SFT Preamplifier Pickup System's controls and interfaces.

4.2. Installation Steps (Professional Installation Recommended)

1. Prepare the Guitar: Carefully mark the locations for the preamplifier unit, end-pin jack, and vibrating horn on your guitar.
2. liang bor: Precisely drill the necessary holes for mounting the components. Ensure correct sizing to prevent damage.
3. Install End-Pin Jack: Secure the end-pin jack at the designated location, typically at the bottom of the guitar.
4. Mount Vibrating Horn: Install the vibrating horn inside the guitar body, ensuring it has clear contact with the soundboard for optimal resonance transmission.
5. Connect Pickup Wire: Connect the pickup wire from the piezo pickup (usually under the saddle) to the preampunit lifier.
6. Pasang PraampUnit pangropéa: Mount the preamplifier unit securely, ensuring all connections are firm.
7. Selapkeun Batré: Open the battery compartment and insert the 2000mAh rechargeable battery. Ensure correct polarity.

Figure 4.2: Battery compartment with 2000mAh battery.

5. Parentah Operasi

5.1. Powering on / Pareum

Locate the power button or switch on the preamplifier unit. Press and hold (or toggle) to power the unit on or off. The Dial LED Lamp will illuminate when the unit is active.

5.2. Adjusting Effects

Anu sateuacannaamplifier features dedicated controls for Reverb, Chorus, and Delay effects. Rotate the corresponding knobs to adjust the intensity of each effect. Experiment with different settings to find your desired sound.

5.3. Sambungan Bluetooth (BT).

The unit is equipped with Bluetooth functionality (BT5.0). To connect to your mobile phone or other Bluetooth-enabled device:

1. Pastikeun sateuacannaamplifier dihurungkeun.
2. Aktipkeun Bluetooth dina alat sélulér Anjeun.
3. Milarian pikeun available devices. The preamplifier kedah némbongan salaku alat anu tiasa kapanggih.
4. Pilih preamplifier from the list to pair. Once paired, you can play background music through the system, which will be mixed with your guitar sound.

Figure 5.1: Bluetooth and other features.

5.4. Pamakéan mikropon

The system includes a microphone as part of its dual-pickup setup. For the microphone to be effective and audible, the preamplifier must be connected to an external speaker or amplifier. Adjust the 'Mic' control knob to blend the microphone signal with the piezo pickup signal.

6. Pangropéa

6.1. Ngecas Batré

Anu sateuacannaamplifier is equipped with a 2000mAh rechargeable battery. When the battery indicator shows low power, connect the provided Type-C cable to the charging port on the unit and to a suitable USB power source. The charging rate is increased by 50% with the Type-C interface.

Figure 6.1: Charging the preamplifier via Type-C cable.

6.2. beberesih

Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.

6.3. Panyimpenan

Upami teu dianggo kanggo waktos anu lami, simpen heulaamplifier in a cool, dry place away from direct sunlight and extreme temperatures. It is advisable to fully charge the battery before long-term storage.

7. Cara ngungkulan

• Taya Kaluaran Sora:
  • Ensure the unit is powered on and fully charged.
  • Check all cable connections (pickup wire, end-pin jack to amplirén).
  • Verify that the volume on your amplifier/speaker is turned up.
• Mikropon Teu Gawé:
  • The microphone requires connection to an external speaker or amplifier to be effective. Ensure your system is connected.
  • Adjust the 'Mic' control knob to increase the microphone signal.
• Masalah Sambungan Bluetooth:
  • Pastikeun sateuacannaamplifier is in pairing mode or discoverable.
  • Pareuman sareng hurungkeun Bluetooth dina alat sélulér anjeun.
  • Move closer to the preamplifier to ensure you are within Bluetooth range.
• Poor Resonance/Effects:
  • Ensure the vibrating horn is properly installed and making good contact with the guitar's soundboard.
  • Adjust the Reverb, Chorus, and Delay knobs to desired levels.

8. Spésifikasi

Gambar 8.1: Dimensi Produk.

9. Garansi jeung Rojongan

Specific warranty information for this product is not provided in the available documentation. For details regarding warranty coverage, technical support, or service, please refer to the manufacturer's official website or contact the retailer from whom you purchased the product. Please retain your proof of purchase for any warranty claims.