1. Bubuka
This manual provides essential information for the safe and effective use of your Generic AC DC Adapter Charger, specifically designed for the Drillmaster 61826 Cordless Screwdriver. Please read this manual thoroughly before use and retain it for future reference.
This adapter is a replacement power supply unit, providing 100V-240V input and suitable output for charging the Drillmaster 61826. It features over-voltage, over-current, and short-circuit protection to ensure safe operation.
2. Émbaran Kasalametan penting
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury.
- Use this adapter only with the Drillmaster 61826 Cordless Screwdriver. Compatibility with other devices is not guaranteed and may cause damage.
- Do not expose the adapter to water, rain, or excessive moisture.
- Do not disassemble, modify, or attempt to repair the adapter. Refer all servicing to qualified personnel.
- Pastikeun voltage matches the adapter's input voltage (100V-240V).
- Ulah neundeun adaptor dina sinar panonpoé langsung atanapi caket sumber panas.
- Jauhkeun tina jangkauan barudak.
- Salawasna cabut adaptor tina stop kontak lamun teu dipake atawa saméméh beberesih.
3. Setup jeung Connection
Follow these steps to properly connect your AC DC Adapter Charger:
- Pariksa adaptor: Before connecting, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
- Nyambung ka Alat: Insert the barrel connector end of the adapter cable into the charging port of your Drillmaster 61826 Cordless Screwdriver. Ensure a snug fit.
- Nyambungkeun ka stop kontak: Plug the AC prongs of the adapter into a standard 100V-240V wall outlet.

Image 1: The Generic AC DC Adapter Charger with its barrel connector. This image shows the main unit and the cable with the connector.

Image 2: This image highlights the 5-foot cable length and the presence of an LED indicator light on the adapter.
4. Parentah Operasi
Once connected, the adapter will begin charging your Drillmaster 61826. Observe the following:
- Indikator LED: The adapter features an LED light. This light typically illuminates when the adapter is receiving power and is ready to charge. Refer to your Drillmaster 61826 manual for specific charging indicators on the screwdriver itself.
- Waktu Ngecas: Charging time will vary depending on the battery's current charge level and capacity.
- Pegatkeun sambungan: Once charging is complete, or if you need to disconnect, first unplug the adapter from the wall outlet, then disconnect the barrel connector from the Drillmaster 61826.
5. Perawatan sareng Pangropéa
To ensure the longevity and proper function of your adapter, follow these maintenance guidelines:
- beberesih: Cabut adaptor tina sadaya sumber daya sateuacan dibersihkeun. Anggo lawon anu lemes sareng garing pikeun ngusap bagian luarna. Entong nganggo pembersih cair atanapi pangleyur.
- Panyimpenan: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Perawatan kabel: Do not bend, twist, or pull the cable excessively. Avoid placing heavy objects on the cable.
6. Cara ngungkulan
Upami anjeun ngalaman masalah sareng adaptor anjeun, tingali masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Adapter LED does not light up / Device not charging. |
|
|
| Adaptor karasana haneut nalika dianggo. | Operasi normal. | A slight warmth is normal during charging. If it becomes excessively hot or emits smoke/odor, unplug immediately and discontinue use. |
Upami léngkah ngungkulan henteu ngabéréskeun masalah, mangga ngahubungi dukungan palanggan.
7. Spésifikasi produk

Image 3: This image illustrates key features such as premium quality components, multipurpose design, stable output, and built-in safety protections.
| Fitur | Rincian |
|---|---|
| Model kasaluyuan | Drillmaster 61826 (fit This Model ONLY) |
| Masukan Voltage | 100V - 240V (Worldwide) |
| Kaluaran Ayeuna | 1 Amps |
| Tipe Panyambung | Sambungan Tong |
| Panjang kabel | 5 peuy |
| Warna | Hideung |
| Fitur husus | Langkung Voltage output Protection, Over Current output Protection, Short Circuit output Protection, LED indicator. |
| Dimensi produk | 2 x 2 x 3 inci |
| Item Beurat | 4 ons |
| Sertifikasi | CE |
8. Garansi jeung Rojongan
This product is a replacement part and typically comes with a standard return/replacement policy as offered by the seller. For specific warranty details or support inquiries, please refer to your purchase documentation or contact the seller directly through the platform where the purchase was made.
For technical assistance or questions regarding compatibility, please reach out to the seller for further guidance.

