Generic 373 Wearable Breast Pump User Manual

1. Bubuka

Thank you for choosing the Generic 373 Wearable Breast Pump. This device is designed to provide a convenient and efficient breast pumping experience, allowing for hands-free operation. Its compact and lightweight design makes it ideal for use at home, work, or while traveling. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your breast pump.

Image 1.1: The Generic 373 Wearable Breast Pump, showcasing its compact design and clear milk collection cup.

2. Émbaran Kasalametan

Please read all instructions carefully before using the breast pump. Keep this manual for future reference.

• This device is intended for personal use by lactating mothers to express breast milk.
• Entong nganggo alat ieu pikeun tujuan naon waé salian ti tujuanna.
• Always ensure the breast pump is assembled correctly and sealed before use to prevent leakage and maintain proper suction.
• Inspect all components before each use for any signs of damage or wear. Discontinue use if any part is damaged.
• Clean and sterilize all parts that come into contact with breast milk before first use and after each subsequent use.
• Keep the device away from water and other liquids, except for the parts intended for washing.
• Do not immerse the pump motor unit in water.
• Jauhkeun tina jangkauan barudak.
• Pernyataan ngeunaan suplemén dietary teu acan dievaluasi ku FDA sareng henteu dimaksudkeun pikeun ngadiagnosa, ngubaran, ngubaran, atanapi nyegah panyakit atanapi kaayaan kaséhatan.

3. Komponén produk

The Generic 373 Wearable Breast Pump consists of the following main components:

Gambar 3.1: Ngabeledug view tina komponén pompa payudara.

1. Silicone shield (x1)
2. Tee (x1)
3. diafragma silikon (x1)
4. Breast pump host (x1)
5. Kabel USB (x1)
6. Duckbill valve (x1)
7. Milk collector (x1)

4. Setup jeung Majelis

Before first use, disassemble all parts that come into contact with breast milk and clean them thoroughly as described in the "Maintenance and Cleaning" section. Ensure all parts are completely dry before assembly.

4.1 Léngkah-léngkah Majelis:

1. Insert the duckbill valve firmly into the bottom of the Tee.
2. Attach the silicone diaphragm securely onto the top of the Tee.
3. Connect the assembled Tee with the duckbill valve and silicone diaphragm to the milk collector. Ensure a tight seal.
4. Place the silicone shield onto the milk collector, ensuring it fits snugly.
5. Finally, attach the breast pump host (motor unit) onto the top of the assembled milk collector and silicone diaphragm. Make sure it clicks into place securely.

4.2 Charging the Pump:

The breast pump features a built-in 1100mAh high-capacity rechargeable lithium battery. Before initial use, fully charge the pump.

• Connect the provided USB cable to the charging port on the breast pump host.
• Sambungkeun ujung kabel USB nu sejen ka adaptor kakuatan USB nu cocog (teu kaasup) atawa port USB komputer.
• The LED screen will indicate charging status. A full charge typically takes approximately 3 hours.
• Once fully charged, the pump can be used 6-10 times, depending on the mode and intensity settings.

Image 4.2: Battery life and charging indicators on the LED screen.

5. Parentah Operasi

The breast pump features an intelligent high-definition LED screen and sensitive touch panel for easy operation.

Image 5.1: LED screen and touch controls overview.

5.1 Power On/Off and Pause:

• Pikeun ngahurungkeun, pencét jeung tahan kenop Tombol Hurung / Pareum / Reureuh (power icon).
• Pikeun pareum, pencét jeung tahan Tombol Hurung / Pareum / Reureuh deui.
• To pause during operation, briefly press the Tombol Hurung / Pareum / Reureuh. Pencét deui pikeun ngahanca.

5.2 Pilihan Mode:

The pump offers four distinct modes, each with 12 adjustable levels:

Gambar 5.2: Leuwihview of the four pumping modes.

• Lactation Mode: Features a brisk rhythm to stimulate milk secretion. Levels 1-6 are automatic, increasing every 45 seconds. Levels 7-12 are manual.
• Pumping Mode: Characterized by a slow and deep suction to help empty the breast efficiently.
• Sucking Mode: Mimics a baby's natural sucking frequency for comfortable expression.
• Inverter Pumping Mode: Combines massage and suction to facilitate fast milk expression.

Pikeun pindah antara modeu, pencét Tombol modeu (labeled 'M'). The active mode will be indicated on the LED screen.

5.3 Adjusting Suction Levels:

• Ngagunakeun éta Gear plus button ('+') to increase the suction level.
• Ngagunakeun éta Gear minus button ('-') to decrease the suction level.
• The current level (1-12) will be displayed prominently on the LED screen.

5.4 Anti-Backflow Design:

The pump incorporates an anti-reverse flow closed system design, which prevents breast milk from flowing back into the motor unit or tubing, protecting milk from contamination and keeping it fresh. This design also minimizes leakage.

Image 5.3: Anti-backflow mechanism.

5.5 Quiet Operation:

The pump is designed with ultra-quiet technology, operating at less than 65 decibels. This ensures a discreet pumping experience without disturbing your baby or others nearby.

Image 5.4: Quiet design for undisturbed use.

5.6 Pareum Otomatis:

For safety and battery conservation, the pump will automatically shut down after 30 minutes of continuous operation.

6. Pangropéa jeung beberesih

Proper cleaning and maintenance are crucial for hygiene and the longevity of your breast pump. Always clean parts immediately after use.

6.1 Ngabongkar:

Carefully disassemble all parts that come into contact with breast milk: the silicone shield, milk collector, Tee, silicone diaphragm, and duckbill valve.

6.2 beberesih:

• Rinse all disassembled parts under cold running water to remove any milk residue.
• Wash parts in warm, soapy water using a mild dish soap. Use a soft brush specifically for cleaning breast pump parts to reach all crevices.
• Bilas tuntas dina cai bersih anu ngocor pikeun miceun sadaya sésa sabun.
• Do not wash the breast pump host (motor unit). Wipe it clean with a damp lawon lamun perlu.

6.3 Sterilization:

• Sterilize the cleaned parts (silicone shield, milk collector, Tee, silicone diaphragm, and duckbill valve) by boiling them in water for 3-5 minutes, or by using a steam sterilizer or microwave sterilizer bag according to their instructions.
• Allow parts to air dry completely on a clean paper towel or drying rack before reassembly or storage. Avoid using cloth towels as they may leave lint.

6.4 Panyimpenan:

Store all clean and dry parts in a clean, dry place away from direct sunlight and dust.

7. Cara ngungkulan

If you encounter issues with your breast pump, please refer to the following common problems and solutions:

Lamun masalah persists sanggeus nyobian solusi ieu, mangga ngahubungan rojongan customer pikeun pitulung salajengna.

8. Spésifikasi

9. Émbaran jaminan

This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear. For specific warranty terms and conditions, please refer to the product packaging or contact customer support.

10. Rojongan Palanggan

If you have any questions, concerns, or require assistance with your Generic 373 Wearable Breast Pump, please do not hesitate to contact our customer support team. We are committed to providing the best possible experience for all users.

Punten gaduh nomer modél produk anjeun (373) sareng inpormasi mésér siap nalika ngahubungi dukungan.

Inpormasi kontak (contona, website, email, phone number) would typically be provided here by the manufacturer.