Bubuka
This manual provides instructions for the installation, operation, and maintenance of the Lockey USA Extension Kit, designed for use with Lockey 2000 and 3000 series mechanical keyless locks. This kit allows the compatible Lockey lock to be installed on doors with a thickness of up to 5 inches.
Please read these instructions carefully before proceeding with installation to ensure proper function and longevity of your lock system.
Produk Leuwihview
Gambar 1: Lockey USA Extension Kit. This image displays the various components included in the extension kit, which are designed to adapt Lockey 2000 and 3000 series locks for installation on thicker doors.
The Lockey Extension Kit is a specialized accessory crafted from durable metal, intended to extend the spindle and mounting bolts of Lockey 2000 and 3000 series locks. This modification enables these locks to be securely fitted onto doors that exceed standard thickness, up to a maximum of 5 inches.
Setup sareng Instalasi
This extension kit is designed to be integrated with an existing or new Lockey 2000 or 3000 series lock. Installation typically involves replacing the standard spindle and mounting bolts with the longer components provided in this kit.
- Persiapan: Ensure you have the Lockey 2000 or 3000 series lock and the necessary tools (e.g., screwdriver, measuring tape).
- Door Thickness Verification: Measure your door thickness to confirm it is within the 5-inch compatibility range of this extension kit.
- Disassembly (if applicable): If installing on an existing lock, carefully remove the lock from the door, following the original lock's instructions. Disassemble the existing spindle and mounting bolts.
- Install Extension Components: Insert the longer spindle and mounting bolts from the extension kit into the lock mechanism. Ensure they are correctly aligned with the lock's internal components.
- Reassembly and Mounting: Reassemble the lock components and mount the lock onto the thicker door. Secure the lock using the extended mounting bolts. Ensure all screws are tightened appropriately, but do not overtighten.
- Uji fungsionalitas: After installation, test the lock's operation thoroughly. Verify that the key turns smoothly, the latch retracts and extends correctly, and the keypad (if applicable) functions as expected.
Note: For detailed instructions specific to your Lockey 2000 or 3000 series lock model, refer to the manual provided with the original lock.
Parentah Operasi
The Lockey Extension Kit facilitates the installation of your Lockey 2000 or 3000 series lock on thicker doors. The operational procedures for the lock itself remain unchanged after the extension kit is installed.
- Operasi konci: Insert the key into the cylinder and turn to lock or unlock the mechanism.
- Keypad Operation (if applicable): Enter the correct code on the keypad to disengage the lock.
- Kontrol Manual: Use the interior thumbturn or lever for manual locking/unlocking.
Ensure that the lock operates smoothly without resistance. If any stiffness or difficulty is encountered, re-check the installation and alignment of the extension kit components.
Pangropéa
Regular maintenance helps ensure the longevity and smooth operation of your Lockey lock system with the extension kit.
- beberesih: Periodically wipe the exterior surfaces of the lock and extension components with a soft, damp lawon. Hindarkeun pembersih abrasive atanapi pangleyur.
- Lubrication: If the key or internal mechanism feels stiff, apply a small amount of graphite-based lubricant to the keyway and moving parts. Do not use oil-based lubricants, as they can attract dirt.
- Pamariksaan: Annually inspect all visible components for wear, damage, or loose fasteners. Tighten any loose screws as needed.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lock feels stiff or difficult to operate after installation. | Misalignment of extension components or overtightened screws. | Loosen mounting screws slightly and re-test. Ensure spindle and bolts are correctly aligned. Apply lubricant if necessary. |
| Kuncina teu muter lancar. | Lack of lubrication or debris in the keyway. | Apply graphite lubricant to the keyway. Clean any visible debris. |
| Lock does not engage/disengage fully. | Incorrect installation of the extension kit or original lock components. | Review the installation steps carefully. Ensure all parts are correctly seated and aligned. |
If problems persist, contact Lockey USA customer support or a qualified locksmith.
spésifikasi
- merek: Lockey AS
- Model kasaluyuan: Lockey 2000 Series, Lockey 3000 Series
- Nomer Bagian: ext kit 2000, 3000
- Jumlah modél: extkit2000/3000
- Jenis produk: Lock Extension Kit
- Bahan: logam
- Ketebalan Panto Maksimum: 5 inci
- Compatible Lock Type: Key Lock (for the Lockey 2000/3000 series)
- UPC: 747925351199
Garansi sareng Rojongan
Specific warranty terms for the Lockey USA Extension Kit are typically provided with the original product purchase or can be obtained directly from Lockey USA or your authorized dealer. Please retain your proof of purchase for warranty claims.
For technical support, replacement parts, or further assistance, please contact Lockey USA customer service through their official website or the contact information provided at the time of purchase.
Lockey USA Official Websitus: www.lockeyusa.com