STUDIO EVOLUTION SE-200D Digital Wireless Microphone System Instruction Manual

SE-200D Digital Wireless Microphone System

Product Information

Specifications

  • Frequency Range: 902.5-927.8MHz
  • Compliance: FCC Part 15
  • Installation Distance: Minimum 0cm between radiator and
    body

Product Usage Instructions

Safety Precautions

Before using the device, ensure that the installation distance
between the radiator and your body is at least 0cm to comply with
FCC radiation exposure limits.

Operation Guidelines

  1. Ensure that the device is within the frequency range of
    902.5-927.8MHz for optimal performance.
  2. Avoid making any changes or modifications to the device that
    are not approved by the manufacturer to maintain operational
    integrity.
  3. Follow FCC rules and regulations regarding harmful interference
    and acceptance of received interference during operation.

Installation Process

  1. Place the device in a location where the minimum distance
    requirement is met.
  2. Connect the device to a power source following the
    manufacturer’s instructions.
  3. Power on the device and ensure it is functioning within the
    specified frequency range.

FAQ

Q: What should I do if the device is not operating within the
frequency range?

A: If the device is not operating within the specified frequency
range, contact the manufacturer for troubleshooting assistance.

Q: Can I modify the device for better performance?

A: No, any modifications to the device not approved by the
manufacturer may void your authority to operate the equipment and
could lead to undesired operation.

902.50

902.50

902.5-927.8MHz

902.5-927.8MHz 902.5-927.8MHz

990022..5500

902.50

902.50

902.50

902.50

03
902.50

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

ISED Statement

English: This device contains licence-exempt transmitter(s)/receiver(s) that

comply with Innovation, Science and Economic

Documents / Resources

STUDIO EVOLUTION SE-200D Digital Wireless Microphone System [pdf] Instruction Manual
SE-200D, SE-200D Digital Wireless Microphone System, Digital Wireless Microphone System, Wireless Microphone System, Microphone System

References

Leave a comment

Your email address will not be published. Required fields are marked *