STUDER - logoNX Wifi Dongle
User GuideSTUDER NX Wifi Dongleswiss made power

General Information

Exclusion of liability
Studer disclaims all responsibility and liability for damage, costs or losses resulting from an installation that does not comply with the instructions, a faulty operation or  inadequate maintenance. The use of studer equipment is in any case under the responsibility of the customer.
Read carefully the safety and operation instructions/Installation must be entrusted to qualified personnel/Check the user manual online/Need help ?

STUDER NX Wifi Dongle - qrhttps://technext3.studer-innotec.com

Installation

STUDER NX Wifi Dongle - Installation

If a network is not supported, i.e. WEP or WPA-3, the network is grey.

STUDER NX Wifi Dongle - ce

The output power is restricted indoors, not applicable for outdoor application.

Chipset RTL8811AU
Standard IEEE 802.11a/b/n/ac
Frequency 2.412 GHz – 2.472 GHz
5.15 GHz – 5.825 GHz
Data-Rate 802.11b: up to 11 Mbps
802.11g: up to 54 Mbps
802.11n: up to 150 Mbps
802.11ac: up to 433 Mbps
Antenna 1x External detachable dual-band
2.4 GHz + 5 GHz 2 dBi antenna
Connector RP-SMA female
Channel width 20 / 40 / 80 MHz
LED indicators Power / WLAN
Working channel 1–14 (2.4 GHz)
36-165 (5 GHz)
Output power 18 dBi
Sensitivity 802.11b: -85 dBm@11 Mbps
802.11g: -69 dBm@54 Mbps
802.11n: -68 dBm@150 Mbps
802.11ac: -59 dBm@433 Mbps
Security 64 / 128 bit WEP
WPA (TKIP with IEEE 802.1x)WPA2 (AES with IEEE 802.1x)WPA Mixed
Operating temp. 10°C ~ 60°C
Storage humidity 5% ~ 98% (Non-condensing)
Dimension 5.5 x 1 x 2.5 cm (L x H x W)

Call our specialists +41 27 205 60 80 or visit studer-innotec.com/support
Studer Innotec SA
rue des Casernes 57
1950 Sion, Switzerland
info@studer-innotec.com

STUDER NX Wifi Dongle - icon© All rights reserved
Studer Innnotec SA – V1

Documents / Resources

STUDER NX Wifi Dongle [pdf] User Guide
NX Wifi Dongle, NX, Wifi Dongle, Dongle
STUDER NX Wifi Dongle [pdf] User Guide
NX, NX Wifi Dongle, Wifi Dongle, Dongle

References

Leave a comment

Your email address will not be published. Required fields are marked *