LIFEPAK ® 1000 AED
Maintenance inspection update

LIFELINKcentral™ AED Program Manager

To log an inspection for one AED at a time:

1. Visually confirm your AED(s) are “OK” and the battery shows two or more bars
2. Log in
   Log into LIFELINKcentral AED Program Manager.
3. Inspections
   From “Equipment,” click “Manage Equipment” and then “Inspections” to see the inspection schedules for those AEDs for which you are responsible.
4. Inspection Schedules
   Next, click on the inspection schedule to which you would like to navigate. In this example, we will click on “Redmond-North Building.”
5. Select AED
   Select the AED for which you are recording the inspection:
6. Verify information (Important for first inspection, optional for future inspections)
   Expand each section and verify the information.
7. Confirm AED readout
   Proceed to Inspection Checklist and select the matching display readout:
   a. Click the “Submit” button to submit your entries.
   b. The AED status will turn green for “Ready” confirming a successfully logged inspection:

   
   You will be returned to the list view of the AED Inspection Schedule page. From there, repeat the steps above to perform a maintenance inspection on the next AED in the list.

   To log an inspection for all AEDs at once:

8. Visually confirm the AEDs are “OK” and the battery on each shows two or more bars
9. Log In
   Log into LIFELINKcentral AED Program Manager.
10. Inspections
    From “Equipment,” click “Manage Equipment” and then “Inspections” to see the inspection schedules for those AEDs for which you are responsible.
11. Inspection Schedules
    Next, click on the Inspection Schedule to which you would like to navigate. In this example, we will click on “Redmond-North Building” to log an inspection for all AEDs affiliated with that schedule:
12. AED Inspection Schedule
    Once you are on the landing page for the “Redmond-North Building” Inspection Schedule, click the “Inspect All” button to log a check for all AEDs at once.
13. Confirm
    The following prompt will appear, asking you to confirm you would like to update the readiness status of all AEDs associated with this schedule to “Ready.” Click “Yes” to complete the check:
    
14. Completed
    You will be routed to the list view for all AEDs on that Inspection Schedule. The maintenance inspection for all AEDs listed in this schedule is complete, and all AEDs will show green for “Ready” with today’s date; in this example, 12/28/2020 at 9:23 AM:

For further information, please contact Stryker at 800 442 1142 (U.S.), 800 668 8323 (Canada) or visit our website at strykeremergencycare.com
Emergency Care
Stryker or its affiliated entities own, use, or have applied for the following trademarks or service marks: HeartSine, LIFELINKcentral, Stryker. All other trademarks are trademarks of their respective owners or holders.
The absence of a product, feature, or service name, or logo from this list does not constitute a waiver of Stryker’s trademark or other intellectual property rights concerning that name or logo. GDR 3336346_C
Copyright © 2021 Stryker

LIFEPAK 1000 AED
Maintenance inspection update

Documents / Resources

stryker LIFELINKcentral AED Program Manager [pdf] User Manual LIFELINKcentral AED Program Manager, AED Program Manager, Program Manager, Manager

References

• User Manual