STRUCTUBE Travine Coffee Table Instruction Manual

TRAVINE Coffee Table Assembly Instructions

Follow the provided step-by-step instructions to assemble your Travine coffee table. Periodically verify and tighten all fittings for user safety, and use a damp cloth for regular cleaning.

Hardware (Included)

Part Quantity
A 44
B 44
C 8
D 8
E 12
F 44
G 28
H 8
I 6
J 20
K 2
L 2
M 2
N 2
O 1
P 1
Q 1
R 1
S 1
T 1
U 2
V 2
W 1
X 1
Y 1
Z 2
A1 2
B1 2
C1 2

Tools (not included): Screwdriver; Hammer.

Quick Setup / Use

  1. Assemble the table by following the instructions step-by-step (Steps 1 through 17).
  2. After assembly, periodically verify and tighten all fittings for user safety.
  3. For cleaning, use a damp cloth for regular cleaning and clean spills immediately.
  4. Avoid abrasive cleaner and do not leave wet or hot items in direct contact with the surface.

TRAVINE Coffee Table Assembly Instructions

Please follow these instructions step-by-step to assemble your Travine Coffee Table.

Hardware

A x 44

B x 44

C x 8

D x 8

E x 12

F x 44

G x 28

H x 8

I x 6

J x 20

K x 2

L x 2

M x 2

A black and white line drawing of a long, thin, rectangular object, possibly a tool or a component, positioned diagonally.

N x 2

(Screwdriver – not included)

(Hammer – not included)

Components

An oblique line drawing shows a long, flat rectangular plate with a narrow outlined edge indicating thickness. Several small dark circular marks are scattered across its surface, including near the edges; no dimensions or labels are shown.

O x 1

A long, flat quadrilateral is shown in diagonal perspective, with several small dark dots scattered across its surface. Partial outlines of other shapes appear at the far left and right edges.

P x 1

A perspective line drawing shows a long, narrow rectangular plate with a visible thick edge. Several small dark circular marks are scattered across its top surface, with a cluster near one end; no labels or printed text appear.

Q x 1

A 3D line drawing of a rectangular metal plate with a series of holes along its edges. The plate is shown in perspective, with the holes arranged in a pattern.

R x 1

An isometric line drawing of a rectangular plate with a thickness. There are five circular holes on the top surface: one near each corner and one in the center.

S x 1

A long, narrow rectangular plate is drawn in perspective, running diagonally from the lower left to the upper right. Small dark marks are spaced along its surface and near its edges; a thin parallel line along the sides shows the plate’s outline. At the far right edge, part of another outlined shape is visible.

T x 1

An elongated, narrow rectangular strip is drawn diagonally from the lower left to the upper right, with several small circular holes along its length and short marks near its ends. A small, separate fragment of another outlined shape is visible at the upper-left edge.

U x 2

V x 2

W x 1

An isometric line drawing of a rectangular plate. It features two small circular holes at the top right corner and two small circular holes at the bottom left corner. A long, thin line runs diagonally across the plate from the bottom left towards the top right.

X x 1

An isometric line drawing of a rectangular plate. It features a central diagonal line running from the bottom-left to the top-right. There are three small dots in a row near the top-right corner and three small dots in a row near the bottom-left corner.

Y x 1

Z x 2

A1 x 2

A 3D line drawing of a long, rectangular metal bar, representing a beam.

B1 x 2

A 3D perspective drawing of a rectangular prism, representing a box.

C1 x 2

Assembly Steps

Step 1

Technical illustration: Assembly diagram of a mechanical plate with fasteners and mounting details.

Step 2

Technical illustration: Assembly diagram of two panels labeled P with screws and washers.

Step 3

Technical illustration: Assembly diagram of plates Q, R, and U with screws and pins.

Step 4

Technical illustration: Assembly diagram of a turner tool holder and mounting plate with labeled components.

Step 5

Technical illustration: Assembly diagram of a rectangular box with labeled components and turner instructions.

Step 6

Technical illustration: Assembly diagram of a steel I-beam with bolted connections and turner detail.

Step 7

Technical illustration: Assembly diagram of a cabinet frame with a bracket and screw.

Step 8

Technical illustration: Assembly diagram of a frame structure with turner 1/2 turn instructions.

Step 9

Technical illustration: Assembly diagram of a turner component onto a wooden base with screw instructions.

Step 10

Technical illustration: Assembly diagram of a rectangular frame with inset details of bracket and screw.

Step 11

Technical illustration: Assembly diagram of two long plates labeled X and Y with screws.

Step 12

Technical illustration: Assembly diagram of a mechanical frame with detailed views of components.

Step 13

Technical illustration: Assembly diagram of two I-beams labeled B1 with a bolted connection detail.

Step 14

Technical illustration: Two structural beams labeled C1 with downward loads and a magnified view of a joint.

Step 15

Technical illustration: Isometric diagram of structural steel beams with connection details.

Step 16

Technical illustration: Isometric diagram of a coffee table with two pull-out drawers.

Step 17

An isometric line drawing of a rectangular box or container, shown from an elevated perspective. The box has a flat top and a visible depth, with a vertical seam or joint on the right side.

Please Note

  • For user safety, periodically verify and tighten all fittings.
  • Use power tools only when indicated.
  • For after-sales parts service please reference: 81.62.14_v1_PO120603
  • Assembly instructions may be revised at any time. The most recent version can be found by visiting: www.structube.com

Clean and Care

Use a damp cloth for regular cleaning. Do not use an abrasive cleaner. Clean spills immediately. Do not leave wet and or hot items in direct contact with the surface.

Troubleshooting

  • Fittings may loosen: Periodically verify and tighten all fittings for user safety.
  • Using power tools: Use power tools only when indicated in the instructions.

Documents / Resources

PDF thumbnailTravine Coffee Table
Instruction Manual · 81.62.14, Travine, Coffee Table, Furniture

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.